anslut 019109 USB Charger for Rechargeable Batteries Instruction Manual

019109 USB Charger for Rechargeable Batteries
Instruction Manual

Item no. 019109

Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions)

SAFETY INSTRUCTIONS

• The battery charger is only intended for use indoors in dry, well-ventilated areas.
• Never attempt to charge non-rechargeable batteries.
• Never attempt to charge batteries not intended to be used with this charger.
• If the battery charger’s power cord is damaged it must be replaced by the manufacturer or an authorized service center to prevent the risk of electric shock.
• The battery charger is not intended to be used by persons (children or adults) with any form of functional disorders, or by persons who do not have sufficient experience or knowledge on how to use it, unless they have received instructions concerning the use of the appliance by someone who is responsible for their safety.
• Keep small children under supervision to make sure they do not play with the battery charger.
• Unplug the plug from the power point before inserting or removing the battery.
• Never leave the battery charger unattended when switched on – risk of fire and electric shock.
• Protect the battery charger from moisture.
• Never immerse the battery charger in water or any other liquid, or use it where there is a risk of it being exposed to water, or falling into the water.
• WARNING! Explosive gas. Avoid sparks and naked flames. Make sure there is adequate ventilation when using the battery charger.
• Connect the battery charger to an easily accessible power point nearby.
• The battery charger is only intended for household use, not for commercial use.

SYMBOLS

| Read the instructions.
---|---
| Class III
| Approved in accordance with the relevant directives.
| Recycle discarded products in accordance with local regulations.

TECHNICAL DATA

DESCRIPTION

USB charger for 1 to 4 chargeable AA and AAA batteries, NiMH/NiCd.
Charging with constant current and sector, time limit function, reverse polarisation protection, short-circuiting, and overcurrent protection.
USB port, international standard.

USE

The charge indicator lights go red when charging is in progress. The battery is fully charged when the charge indicator lights go green.

1. Insert the batteries with the correct polarity. If the batteries are inserted with the incorrect polarity there will be no charging (reverse polarisation protection).
2. Connect to the USB adapter with the direct current cable with a Micro USB connection.
3. The charge indicator lights go red when charging is in progress. The battery is fully charged when the charge indicator lights go green.
4. Disconnect the charger from the USB adapter when the charging is complete.
5. Remove the battery/batteries from the charger.

OPERATING CONDITIONS

1. Use: temperature 0 to 35°C, humidity ≤ 95%
2. Storage: temperature –25 to 60°C, humidity ≤ 85%

CHARGING AND BATTERY INSTRUCTIONS

1. Only charge batteries free from corrosion damage, mechanical damage and signs of leakage. Brand and data stickers on the batteries should be intact and legible.
2. The charger has indicator lights that show the charging and operating status.
3. The charge indicator lights go red when charging is in progress. The battery is fully charged when all the charge indicator lights go green.
4. If alkaline batteries, zinc-carbon batteries or defective batteries are put in the charger the status lights will flash alternately.
5. Disconnect the charger from the USB adapter when the charging is complete.
6. Remove the battery/batteries from the charger.

NOTE:
Only charge in a well-ventilated area.
Keep children and pets at a safe distance from the charger when in use.
Only use the charger at an ambient temperature of 0 to 35°C.
Disconnect the power supply after charging.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>