FUFU GAGA LJY-KF260073-01 Contemporary Sideboard Instruction Manual
- June 11, 2024
- FUFU GAGA
Table of Contents
FUFU GAGA LJY-KF260073-01 Contemporary Sideboard Instruction Manual
IMPORTANT INFORMATION!
please read the entire manual before starting to assemble and/or using this
product.follow the manual thoroughly and keep it for further reference.
AVOID SCRATCHES!
In order to avoid scratching this furnuture should be assembled on a soft
layer-could be a rug.
IMPROVE EFFICIENCY !
Try to find a partner to install with you, which can speed up the
installation efficiency and shorten the time.
ANTI-TOPPLE WARNING !
Overturned furniture can cause serious or fatal crush injuries. To prevent
tipping over, be sure to use the wall attachment, if not included with this
product. Please purchase the wall attachment that fit your wall. If unsure,
seek professional advice. Please read and follow each step of the instructions
carefully.
IMPORTANT !
It is important that any product which is assembled using any kind of screw is
re tightened 2 weeks after assembly,and once every 3 months – in order to
assure stability through out the lifespan of the product.
For regular maintenance and cleaning of the product, for the frame, please use
a rag dipped in neutral detergent to fully wipe it, and then dry it with a
clean rag.For glass materials, wipe with a rag dampened with water glass
cleaner, and then dry with a dry rag.
Do not use an electric screwdriver, and do not use too much force when
installing, because the board is easy to break.
Please prepare the following tools
When installing, please carefully confirm whether each screw corresponds to
the manual, accessories with similar shapes can be distinguished by size
This product has reserved holes. Please install hardware components in the
correct reserved holes according to the figure and written instructions. Do
not drill holes by yourself.
Instructions
Separrate glide into two parts at first.
Fix slide rail(E) to plate 4 and 5 using screw(F) as shown. Insert quickfit
screw(A) into corresponding holes in plate 4 and 5 with a screwdriver as
shown.
Connect plate 4 and 5 with plate 8 using wooden dowel(D), put cam lock(B) into
holes in plate 8 and turn clockwise to tighten as shown.
Insert quickfit screw(A) into corresponding holes in plate 2 with a
screwdriver as shown.
Attach plate 2 to plate 3,4,5 and 6 with wooden dowel(D), put cam lock(B) into
holes in plate 3,4,5,6 and turn clockwise to tighten as shown.
Fix part 18 with steel tube 19 together using screw(H) as shown.
Attach the component to plate 2 using screw(H) as shown.
Fix leg support 20 to plate 2 using screw(J) as shown
Insert quickfit screw(A) into corresponding holes in plate 1 as shown.
Fix part(M) to plate 1 using screw(L) as shown.
Slide back plate 9 and 10 along grooves as shown.
Cover plate 1 to the top with wooden dowel(D), put cam lock(B) into holes in
plate 3,4,5,6 and turn clockwise to tighten as shown.
Insert part(P) into corresponding holes, then place shelf 7 in as shown.
Fix hinge(Q) to plate 11 and 12 respectively using screw(F) as shown.
Fix handle(S) to door plates using screw(F).
Fix part(N) to plate 11 and 12 using screw(L) as shown.
Attach door plate to the unit by fixing hinge using screw(F) as shown.
Fix plate 14 and 15 to plate 16 using screw(R) as shown.
Insert quickfit screw(A) into plate 13 as shown. Slide plate 17 along grooves,
then attach plate 13,put cam lock(B) into holes in plate 14,15 and turn
clockwise to tighten as shown.
Fix runner(E) to plate 14 and 15 using screw(F) as shown.
Fix handle(S) to drawer face plate using screw(F) as shown.
Align rails, slide the drawer.
Fix part(T) to back plate using screw(F) as shown.
Install anti-tipping device as shown.
More detailed hinge adjustment mode:
- Rotate out the screws connected with the cabinet counterclockwise, adjust the gap between the overall door frame and the upper and lower, and then rotate the screws clockwise after adjusting;
- Rotate the screws at the end of the hinge counterclockwise to adjust the gap between the whole door frame and the cabinet before and after the adjustment, and then rotate the screws clockwise (rotate out to the movable door frame, do not need to over-rotate out);
- Counterclockwise rotation of the screws in the middle of the hinge will offset the corresponding part of the rear door frame to the left, and clockwise rotation of the screws in the middle of the hinge will offset the corresponding part of the rear door frame to the right.
WARRANTY
WARRANTY CLAIMS
- There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase.
- Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
- The product must be used in accordance with the instructions provided. For health reasons.
- For other reasons, if the furniture needs to be returned, it must be cleaned and dried and operated within 30 days of receipt.
Type of Warranty Claim
- Failure to follow the furniture instructions will invalidate the warranty. Attention please.
- Does not include damage during installation, but includes damage during transportation.
Scope of responsibility
- Shall not bear any responsibility for misuse or user damage and / or loss of parts during the installation of furniture.
- After using, the damage and scratches of the furniture are not covered by the warranty.
The Warranty Relates to All Bought in The Us and Covers The Following Areas
- Sheet parts: 1 month from the date of purchase.
- Electrical parts: 1 month from the date of purchase.
RETURNS
CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
- If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns.
DEFECTIVE ITEMS
- If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us.
DAMAGED ITEMS
- If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused. If the delivery has been accepted and then shipping damage is found, please follow the specific instructions advised by the retailer.
In all circumstances please save all packaging material and paperwork for the order.
Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardise your chances of making a claim, and you may not receive a credit for the return.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>