Anolis UVinere Remote Series LED Light User Manual

: September 3, 2024
: ANOLiS

Table of Contents

Anolis UVinere Remote Series LED Light
Safety instructions
Fixture exterior view
Installation
Software update
Technical specifications
Dimensions
Cleaning and maintenance
ChangeLog
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Anolis UVinere Remote Series LED Light

Specifications:

Version: 1.6
UV Source: UV LEDs
Maximum Exposure Time:
- UVinere 1: See table for different distances
- UVinere 2: See table for different distances
- UVinere 4: See table for different distances
Fixture Class: Class III
Intended Use: Outdoor use, not for underwater installation

Safety Instructions:

This device contains UV LEDs and must be installed following technical directions to prevent harmful UV radiation exposure to eyes and skin. Failure to comply may result in blindness and skin cancer.

Dangerous voltage is present within the unit. Always disconnect from power before cleaning, servicing, or installing. Do not cover the fixture during operation, and ensure the housing is closed and screws are fastened tightly before operation.

Avoid extreme heat, dust, open flames, and possible impacts during installation. Allow the fixture to cool before servicing. Operate only after understanding its functions and do not permit unqualified persons to operate it.

Unauthorized modifications are forbidden and may void the warranty. Use original packaging for transportation and operate only as described in the manual to prevent damages and hazards.

Usage Instructions:

Disconnect the fixture from power before cleaning, servicing, or installing.
Choose an installation spot away from extreme heat, dust, open flames, and possible impacts.
Ensure the fixture housing is closed and all screws are tightly fastened before operation.
Allow the fixture to cool for approximately 30 minutes before servicing or maintenance.
Operate the fixture only after familiarizing yourself with its functions.
Do not permit unqualified persons to operate the fixture.
Avoid unauthorized modifications to prevent hazards and warranty voidance.
Use original packaging for transportation to prevent damages.

FAQ:

Q: Can the UVinere Remote be used underwater?
A: No, the UVinere Remote is designed for outdoor use only and must not be used for underwater installation.

Q: What should I do if the fixture becomes hot during operation?
A: Allow the fixture to cool for approximately 30 minutes before servicing or maintenance to prevent burns or hazards.

Q: Can unqualified persons operate the UVinere Remote?
A: No, only operate the fixture after understanding its functions. Do not permit unqualified persons to operate it to ensure safety.

QR code for user manual

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE POWERING OR INSTALLING YOUR UVinere Remote !

Save it for future reference.

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure safe operation, it is absolutely necessary for the user to follow the safety instructions and warnings written in this manual.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the device.
Unauthorized modification will void warranty.

Safety instructions

THIS LUMINAIRE IS DESIGNED WITH UV LEDS AND MUST BE INSTALLED IN COMPLIANCE WITH COMPETENT TECHNICAL DIRECTIONS TO PREVENT THE USER’S EYE AND BARE SKIN FROM EXPOSURE TO HARMFUL UV RADIATION.
CE LUMINAIRE EST CONCU POUR ETRE UTILISE AVEC DES LED UV ET DOIT ETRE INSTALLE EN STRICTE CONFORMITE AVEC LES INSTRUCTIONS AFIN D’EVITER QUE LES YEUX OU LA PEAU L’UTILISATEUR NE SOIENT EXPOSES AUX EFFETS NEFASTES DES RAYONS UV.

CAUTION: Radiation exposure may cause blindness and cancer of skin!

Maximum exposure time (minutes)

| Non optical version| 24°
Distance from UV source| UVinere 1| UVinere 2| UVinere 4| UVinere 1| UVinere 2| UVinere 4
0.8m (2.6ft)| 21| –| –| –| –| –
0.9m (3.0ft)| 26.6| –| –| –| –| –
1m (3.3ft)| 32.9| –| –| –| –| –
1.5m (4.9ft)| 74.0| 37.0| 18.5| –| –| –
2m (6.6ft)| 131.5| 65.7| 32.9| 24.5| –| –
3m (9.8ft)| 295.9| 147.9| 74.0| 55.0| 27.5| –
4m (13ft)| 526.0| 263.0| 131.5| 97.9| 48.9| 24.5
5m (16.4ft)| 821.8| 410.9| 205.5| 152.9| 76.5| 38.2
6m (19.7ft)| 1183.4| 591.7| 295.9| 220.2| 110.1| 55.0
7m (23ft)| 1610.8| 805.4| 402.7| 299.7| 149.8| 74.9
8m (26ft)| 2103.9| 1051.9| 526.0| 391.4| 195.7| 97.9
9m (29.5ft)| 2662.7| 1331.4| 665.7| 495.4| 247.7| 123.9
10m (32.8ft)| 3287.3| 1643.7| 821.8| 611.6| 305.8| 152.9

DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT!

Always disconnect the fixture from power before cleaning, servicing or installing.
This fixture falls under protection class III.
The fixture was designed for outdoor use. This fixture must not be used for underwater installation.
When choosing the installation spot, please make sure that the fixture is not exposed to extreme heat or dust. Do not install the unit near an open flame.
Avoid using the unit in locations subject to possible impacts.
The fixture body never must be covered with cloth or other materials when the fixture is under operation.
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.
The fixture becomes hot during operation. Allow the fixture to cool approximately 30 minutes prior to servicing or maintenance.
Operate the fixture only after having familiarized yourself with its functions. Do not permit operation by persons not qualified to operate the fixture.
Please consider that unauthorized modifications on the fixture are forbidden due to safety reasons!
Please use the original packaging if the fixture is to be transported.
If this device will be operated in any way different to the one described in this manual, the product may suffer damages and the warranty becomes void. Furthermore, any other operation may lead to dangers like short-circuit, burns, electric shock etc.
Refer servicing to qualified service personnel.
The product (covers and cables) must not be exposed to a high frequency electromagnetic field higher than 3V/m.
Immunity of the equipment is designed according to the standard EN 55035 Electromagnetic compatibility of multimedia equipment – Immunity requirements
Emission of the equipment complies with the standard EN55032 Electromagnetic compatibility of multimedia equipment – Emission Requirements according to class B.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The [Device] wireless operation is safe and complies to RF Exposure requirements.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Warning for fixtures with Harsh Environment Finish (HEF):

Handle with care!
Avoid any damage to the painted surface.
Damaging the paint may result in corrosion and loss of warranty.

Fixture exterior view

Transparent glass cover
Gore tex valve
Cable gland M20 (IN)
Housing
Mounting brackets
Cable gland M20 (OUT)
Junction box

Installation

Mounting the fixture
The UVinere Remote can be arranged in any orientation on a flat, non-flammable surface by means of two mounting brackets (5) which can be tilted by 30°.

Connection to driver

The unit must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.

The UVinere Remote modules should be connected to the E-Box Remote or E-Box Remote basic as stated in the chapter “Technical specifications“.

Example of connection

The table below states max. number of UVinere Remote modules connected to the E-box Remote/E-box Remote Basic.

| Max. number of UVineres Remote UV connected to the E-box Remote/E-box Remote Basic
---|---
**Cable length *| UVinere Remote 1| UVinere Remote 2| UVinere Remote 4**
25 m| 20| 10| 5
50 m| 16| 8| 4
75 m| 13| 6| 3
100 m| 10| 5| 2

Cable length is a total cable length between E-box Remote (E-box Remote Basic) and last connected UVinere Remote.

Example: Total cable length=L1+L2+L3+L3

Max. number of UVinere Remote modules connected to the one output of the E-box Remote/E-box Remote Basic is stated in the following table.

Max. number of UVineres Remote connected to the one output of the E-box Remote/E-box Remote Basic

UVinere Remote 1| UVinere Remote 2| UVinere Remote 4
16| 8| 4

Example: if you want to connect 10 UVineres Remote to the E-box Remote, you may connect 8 UVineres Remote 2 to the output 1 and 2 UVineres Remote UV 2 to the output 2 (at total cable length of 25 m).

Wiring of the junction box

Unscrew the four screws (9) on the cover (8) of the junction box (7), remove the cover (8) and the gasket (10).
Remove the end cap (11) from cable glands before passing cables throw cable glands M20 (3,6).
The cable glands M20x1.5 can be used for cables of a diameter of 7-13mm.
Pass the power/data cables through the cable glands (3,6) and connect them to the connection blocks (12, 13).
After checking all connections, fill the junction box with synthetic resin. Make sure that the End cap is inserted in unused cable gland before filling it.
At filling of the junction box proceed according instructions stated on the bag of the resin.
The connection blocks have to be fully poured in the resin.
Place the gasket (10) on the junction box (7) and screw the cover (8) to the junction box (7).
Check that all cable glands (and blind flange) and screws are firmly tightened.

Wiring of connection blocks (12,13) in the junction box

CE version

Connector	Vcc	D+	D-	0V	****
Function	LEDs +	Data +	Data –	LEDs –	Ground
Colour of wire	Red	Orange	White	Black	Not connected

US version

Connector	Vcc	D+	D-	0V	****
Function	LEDs +	Data +	Data –	LEDs –	Ground
Colour of wire	Red	Orange	White	Black	Yellow/Green

NOTE: Each line of UVineres Remote connected to the LED output of the E-box Remote/E-box Remote Basic has to be terminated at the last fixture.

EITHER connect a 120 Ohm resistor between terminals D+ and D- in the last fixture, OR terminate via RDM as described in the user manual for the E-box Remote.

Ensure ONLY the last fixture in the line is terminated using ONE of the above methods!

To keep declared IP rating of the fixture, every cable gland has to be covered with the end cap (11) if the cable gland is not used for cable passing.

We recommend to apply an adequate layer of the paste LOCTITE 5331 on the plastic holder of the cable gland before inserting it into the body of the gland and an adequate layer of the paste LOCTITE 577 on the thread of the body of gland (if the cable gland was screwed out).

Software update

Software update of UVinere Remote has to be done by means of the software ROBE Uploader running on PC. The ROBE Uploader is a software for automatized software update of ROBE fixtures. The ROBE Uploader switches Emineres Remote UV to the update mode automatically.

Please see https://www.robe.cz/robe-uploader/ for more information about ROBE uploader and the E-box Remote user manual (E-box Remote Basic user manual).

Technical specifications

Power supply

Input voltage: 48 V
Power consumption:
- UVinere Remote 1: 20W
- UVinere Remote 2: 40W
- UVinere Remote 4: 80W

Optic

Light source:
- UVinere Remote 1: 8 x
- UV LEDs UVinere Remote 2: 16 x
- UV LEDs UVinere Remote 4: 32 x UV LEDs
UV LEDs Wave Length: 365nm
Beam Angle:
- optical version: 24°
- non-optical version: 92°
LEDs lifetime: 10.000 hrs

Compatible drivers

E-box Remote, E-box Remote Basic

Mounting method

Via two L-shape brackets with adjustment range 30°

Housing

Aluminium extruded body
Tempered glass

Cooling system

Convection

Total heat dissipation

UVinere Remote 1: 51 BTU/h (calculated)
UVinere Remote 2: 102 BTU/h (calculated)
UVinere Remote 4: 205 BTU/h (calculated)

Weight

UVinere Remote 1: 2 kg (4.41 lbs)
UVinere Remote 2: 3.1 kg (6.83 lbs)
UVinere Remote 4: 5.1 kg (11.24 lbs)

Dimensions

(All dimensions in mm [inch])

Protection factor

CE: IP 67
US: Suitable for wet location

Impact rating

CE: IK06

Operating ambient temperature range

-20°C /+40°C (-4°F /+104°F)

Operating temperature

+67°C @ Ambient +40°C (+153°F @ Ambient +104°F)
Connection
5-cored cable

Included items

1 x UVinere Remote
1 x User manual

Optional accessories

Cable for Eminere Remote (P/N 13053336)
Black Glass Adaptor UVinere Remote 2 RAL9011 (P/N 10980752)
Black Glass Adaptor UVinere Remote 4 RAL9011 (P/N 10980702)

Cleaning and maintenance

DANGER !
Disconnect from the mains before starting any maintenance or cleaning work

Rinse off loose dirt with low pressure water spray. Wash the housing with a soft brush or sponge and a mild, non-abrasive washing detergent. Rinse it.
Maintenance and service operations are only to be carried out by a qualified person.
Should you need any spare parts, please use ROBE OEM parts.

Disposing of the product
To preserve the environment please dispose or recycle this product at the end of its life according to the local regulations and codes.

ChangeLog

This section summarizes changes in the user manual.

Version of the manual	Date of issue	Description of changes
1.0	19/05/2022	QR code added
1.1	17/08/2022	Termination of Emineres line added, colors of wires changed
1.2	09/01/2023	Eminere Remote 1 added
1.3	18/01/2023	Device renamed to UVinere Remote
1.4	10/02/2023	DMX chart ver. 3.2
1.5	11/01/2024	Description of junction box connection
1.6	16/02/2024	Notice about Protection class III added to Safety instructins

Specifications are subject to change without notice.

February 16, 2024
Copyright © 2020-2024 Robe Lighting – All rights reserved
Made in CZECH REPUBLIC by ROBE LIGHTING s.r.o. Palackeho 416/20 CZ 75701 Valasske Mezirici

DMX protocol for: Eminere 1/2/3/4; Eminere Side 1/2/3/4;

Eminere Inground 2/4; Eminere Remote 1/2/3/4;
UVinere 2/4; UVinere Remote 1/2/4
Version: 3.3 (23 modes in total), software version 3.0 and higher|
Mode/Channels in all| Mode 1: RGBW(A)-8bit, Mode 2: RGB 8-bit, Mode 3: full RGBW(A)|
1| 2| 3| 4| 5| 6| 7| 8-10| Mode 4: White-full control, Mode 5: Reduced RGBW(A)|
4| 3| 12| 3| 6| 8| 15| Reserved| Mode 6- Reduced RGBW(A)+white control|
| | | | | | | | Mode 7- full RGBW(A)+virtual colour wheel|
| | | | | | | | RGBW(A) / RGB modes|
M od e / c h a nn e l s| DMX

Value

| Function| Type of control
1| 2| 3| 4| 5| 6| 7
–| –| –| –| –| –| 1| | Special functions|
| | | | | | | 0| No function| step
| | | | | | | | To activate following functions , stop in DMX value for at least 3 sec.|
| | | | | | | 1-2| Save current DMX values to fixture as initial DMX values.| step
| | | | | | | 3-4| Show saved initial DMX values| step
| | | | | | | 5-6| Run factory demo sequences at switching fixture on (without DMX)| step
| | | | | | | 7-8| Insect friendly light On (RGBA version only)| step
| | | | | | | 9-10| Insect friendly light Off (RGBA version only)| step
| | | | | | | 11-255| Reserved|
1| 1| 1| –| 1| 1| 2| | Red|
| | | | | | | 0-255| Red LEDs saturation control (0-100%)| proportional
–| –| 2| –| –| –| 3| | Red Fine|
| | | | | | | 0-255| Red LEDs saturation control fine| proportional
2| 2| 3| –| 2| 2| 4| | Green|
| | | | | | | 0-255| Green LEDs saturation control (0-100%)| proportional
–| –| 4| –| –| –| 5| | Green Fine|
| | | | | | | 0-255| Green LEDs saturation control fine| proportional
3| 3| 5| –| 3| 3| 6| | Blue|
| | | | | | | 0-255| Blue LEDs saturation control (0-100%)| proportional
–| –| 6| –| –| –| 7| | Blue Fine|
| | | | | | | 0-255| Blue LEDs saturation control fine| proportional
4| –| 7| –| 4| 4| 8| | White (Amber)|
| | | | | | | 0-255| White LEDs saturation control (0-100%)| proportional
–| –| 8| –| –| –| 9| | White (Amber) Fine|
| | | | | | | 0-255| White LEDs saturation control fine| proportional
–| –| 9| 1| –| 5| 10| | Green correction|
| | | | | | | 0| Uncorrected white| step
| | | | | | | 1-127| Minus green –> uncorrected white| proportional
| | | | | | | 128| Uncorrected white (128=default)| step
| | | | | | | 129-255| Uncorrected white –> Plus green| proportional
–| –| 10| 2| –| 6| 11| | Colour temperature correction (CTC)|
| | | | | | | 0| No function| step
| | | | | | | 1-10| Tungsten dimming 2700 K| step
| | | | | | | 11-20| Tungsten dimming 3200 K| step
| | | | | | | 21-255| Colour temperature changing from 1800 K –> 6500 K| proportional
M od e / c h a nn e l s| DMX

Value

| Function| Type of control
---|---|---|---
1| 2| 3| 4| 5| 6| 7
| | | | | | | | (21-1800K, 66-2700K, 91-3200K,141-4200K, 211-5600K, 255-

6500K)

slow-> fast

from slow-> fast

slow-> fast

from slow-> fast

fast

slow-> fast

Value

| Function| Type of control
---|---|---|---
1| 2| 3| 4| 5| 6| 7
| | | | | | 13| | Shutter/Strobe|
| | | | | | | 0-31| Shutter closed| step
| | | | | | | 32-63| Shutter open| step
| | | | | | | 64-95| Strobe-effect from slow to fast| proportional
| | | | | | | 96-127| Shutter open| step
| | | | | | | 128-143| Opening pulse in sequences from slow to fast| proportional
| | | | | | | 144-159| Closing pulse in sequences from fast to slow| proportional
| | | | | | | 160-191| Shutter open| step
| | | | | | | 192-223| Random strobe-effect from slow to fast| proportional
| | | | | | | 224-255| Shutter open| step
–| –| 11| 3| 5| 7| 14| | Dimmer|
| | | | | | | 0-255| Light intensity coarse (0-100%)| proportional
–| –| 12| –| 6| 8| 15| | Dimmer Fine|
| | | | | | | 0-255| Light intensity fine| proportional
| | | | | | | | |
Copyright © 2022-2024 Robe Lighting s.r.o. – All rights reserved|
All Specifications subject to change without notice| |
| | | | | | | | |
DMX protocol for: Eminere 1/2/3/4; Eminere Side 1/2/3/4;

Eminere Inground 2/4; Eminere Remote 1/2/3/4;
UVinere 2/4; UVinere Remote 1/2/4
Version: 3.3 (23 modes in total)| | |
Mode/Channels in all| Mode 11: White selection, Mode 12: WW + CW|
11| 12| 13| 14-16| Mode 13: Only dimmer|
3| 4| 2| Reserved| Mode 13 is suitable for UVinere and UVinere Remote|
| | | | TW and PW modes|
M od e / c h a nn e l s| DMX

Value

| Function| Type of control
11| 12| 13
1| –| –| | White colour selection|
| | | 0 – 255| White from 2700 K – 6500 K| proportional
–| 1| –| | Warm White|
| | | 0 – 255| Warm White LEDs saturation control (0-100%)| proportional
–| 2| –| | Cool White|
| | | 0 – 255| Cool White LEDs saturation control (0-100%)| proportional
2| 3| 1| | Dimmer|
| | | 0 – 255| Light intensity coarse (0 – 100%)| proportional
3| 4| 2| | Dimmer Fine|
| | | 0 – 255| Light intensity fine| proportional
| | | | |
Copyright © 2022-2024 Robe Lighting s.r.o. – All rights reserved|
All Specifications subject to change without notice|
| | | | |
DMX protocol for: Eminere 1/2/3/4; Eminere Side 1/2/3/4;

Eminere Inground 2/4; Eminere Remote 1/2/3/4;

Version: 3.3 (23 modes in total)| | |
Mode/Channels in all| Mode 17: RGBW(A) pixels, Mode 18: RGB pixels, Mode 19: TW pixels,
17| 18| 19| 20| 21-23| Mode 20: PW dimmer pixels|
16| 12| 8| 8| Reserved| |
| | | | | Pixel modes|
M od e / c h a nn e l s| DMX

Value

| Function| Type of

control

17| 18| 19| 20
1| 1| –| –| | Red 1 -Eminere 1/2/3/4|
| | | | 0 – 255| Red LEDs saturation control (0-100%)| proportional
2| 2| –| –| | Green 1-Eminere 1/2/3/4|
| | | | 0 – 255| Green LEDs saturation control (0-100%)| proportional
3| 3| –| –| | Blue 1-Eminere 1/2/3/4|
| | | | 0 – 255| Blue LEDs saturation control (0-100%)| proportional
4| –| –| –| | White (Amber) 1-Eminere 1/2/3/4|
| | | | 0 – 255| White LEDs saturation control (0-100%)| proportional
5| 4| –| –| | Red 2 -Eminere 2/3/4|
| | | | 0 – 255| Red LEDs saturation control (0-100%)| proportional
6| 5| –| –| | Green 2-Eminere 2/3/4|
| | | | 0 – 255| Green LEDs saturation control (0-100%)| proportional
7| 6| –| –| | Blue 2-Eminere 2/3/4|
| | | | 0 – 255| Red LEDs saturation control (0-100%)| proportional
8| –| –| –| | White (Amber) 2-Eminere 2/3/4|
| | | | 0 – 255| White LEDs saturation control (0-100%)| proportional
9| 7| –| –| | Red 3-Eminere 3/4|
| | | | 0 – 255| Red LEDs saturation control (0-100%)| proportional
10| 8| –| –| | Green 3-Eminere 3/4|
| | | | 0 – 255| Green LEDs saturation control (0-100%)| proportional
11| 9| –| –| | Blue 3-Eminere 3/4|
| | | | 0 – 255| Blue LEDs saturation control (0-100%)| proportional
12| –| –| –| | White (Amber) 3-Eminere 3/4|
| | | | 0 – 255| White LEDs saturation control (0-100%)| proportional
13| 10| –| –| | Red 4-Eminere 4|
| | | | 0 – 255| Red LEDs saturation control (0-100%)| proportional
14| 11| –| –| | Green 4-Eminere 4|
| | | | 0 – 255| Green LEDs saturation control (0-100%)| proportional
15| 12| –| –| | Blue 4-Eminere 4|
| | | | 0 – 255| Blue LEDs saturation control (0-100%)| proportional
16| –| –| –| | White (Amber) 4 -Eminere 4|
| | | | 0 – 255| White LEDs saturation control (0-100%)| proportional
–| –| 1| –| | Warm White 1 -Eminere 1/2/3/4|
| | | | | Warm White LEDs saturation control (0-100%)| proportional
–| –| 2| –| | Cool White 1-Eminere 1/2/3/4|
| | | | 0 – 255| Cool White LEDs saturation control (0-100%)| proportional
–| –| 3| –| | Warm White 2-Eminere 2/3/4|
M od e / c h a nn e l s| DMX

Value

| Function| Type of

control

---|---|---|---
17| 18| 19| 20
| | | | 0 – 255| Warm White LEDs saturation control (0-100%)| proportional
–| –| 4| –| | Cool White 2-Eminere 2/3/4|
| | | | 0 – 255| Cool White LEDs saturation control (0-100%)| proportional
–| –| 5| –| | Warm White 3-Eminere 3/4|
| | | | 0 – 255| Warm White LEDs saturation control (0-100%)| proportional
–| –| 6| –| | Cool White 3-Eminere 3/4|
| | | | 0 – 255| Cool White LEDs saturation control (0-100%)| proportional
–| –| 7| –| | Warm White 4 -Eminere 4|
| | | | 0 – 255| Warm White LEDs saturation control (0-100%)| proportional
–| –| 8| –| | Cool White 4 -Eminere 4|
| | | | 0 – 255| Cool White LEDs saturation control (0-100%)| proportional
–| –| –| 1| | Dimmer 1|
| | | | 0 – 255| Light intensity coarse (0 – 100%)| proportional
–| –| –| 2| | Dimmer Fine 1|
| | | | 0 – 255| Light intensity fine| proportional
–| –| –| 3| | Dimmer 2|
| | | | 0 – 255| Light intensity coarse (0 – 100%)| proportional
–| –| –| 4| | Dimmer Fine 2|
| | | | 0 – 255| Light intensity fine| proportional
–| –| –| 5| | Dimmer 3|
| | | | 0 – 255| Light intensity coarse (0 – 100%)| proportional
–| –| –| 6| | Dimmer Fine 3|
| | | | 0 – 255| Light intensity fine| proportional
–| –| –| 7| | Dimmer 4|
| | | | 0 – 255| Light intensity coarse (0 – 100%)| proportional
–| –| –| 8| | Dimmer Fine 4|
| | | | 0 – 255| Light intensity fine| proportional
| | | | | |
Copyright © 2022-2024 Robe Lighting s.r.o. – All rights reserved|
All Specifications subject to change without notice| |
| | | | | |