Gabba goods GG-TAIR Premium Truebuds Air True Wireless Earbuds User Manual
- June 4, 2024
- Gabba goods
Table of Contents
Gabba goods GG-TAIR Premium Truebuds Air True Wireless Earbuds
introduction
Congratulations, and thank you for choosing Truebuds Air wireless stereo earbuds, By GabbaGoods, This manual help you operate the Truebuds Air wireless earbuds, but first you should familiarize yourself with the Bluetooth® functionality of your mobile phone or smart device before using the Truebuds wireless stereo earbuds.
Safety Rules
- Please follow the rules depicted in this manual closely to ensure your safety. Before using the product, we would strongly encourage you to read through this user manual.
- Be wary of any edges, uneven surfaces, metal parts, accessories, and packaging to prevent any possible injury or damage.
- Do not modify, repair or dismantle the product. Doing so may result in fire, electric shock, complete breakdown of the product, etc. All of these are not covered under warranty.
- Do not use any diluent or volatile liquid to clean the product.
- Do not use the product in a hazardous location.
Package Contents
Product Diagram
How To Use
General Functions
Touch Control Functions
Left Bud
| SingleTap:Play/Pause/AcceptCall/EndCall
Double Tap: Next Song
Triple Tap: Volume Up
---|---
Right Bud
| SingleTap:Play/Pause/Accept(all/EndCall
Double Tap: 1st TIme – Replay Song/
2ndTime-PreviousSong
Triple Tap: Volume Down
Both Buds
| Tap& Hold (l SerondsJ:Voice Assitance (Siri/Google)
Tap& Hold (5 Seconds): Power Off (both Buds)
/PowerOn(individually)
lnC11II
| SingleTap:AcceptCall/EndsCall
Triple Tap:Volume Up (Left) /Volume Down (Right)
Syncing
- To use your Bluetooth”‘ stereo Truebuds, you must first pair your Truebuds to a Bluetooth® enabled device. Once your Bluetooth” Truebuds are paired to a smart device, they will remain paired and automatically recognize each other whenever they are within range.
- To switch on and sync the Truebuds together simply remove them from the charging case and they will turn on automatically, the Truebuds LED light will start to flash red and blue, and the other earbuds LED light will turn off, they are now ready to be paired with a Bluetooth® compatible device. Be sure that your device’s Bluetooth, function is turned on.
- Search for the Truebuds using a Bluetooh• compatible device. Select “Truebuds Air” from the list of devices to connect and pair. Once paired the Truebuds will prompt you “Your Bluetooth device is connected”
- To unpair or remove a Bluetooth” compatible device from the Truebuds turn off the Bluetooth9 function on the compatible device. The Truebuds can now be paired with a new compatible device.
- Note: Pairing mode will last for 3-4 minutes. If no Bluetooth,i,, devices are paired within this time, the Truebuds will automatically power off.
Charging Your Stereo TRUEBUDS
The charging case is fitted with a 300 mAh rechargeable battery (non- removable). It’s recommended that the battery is fully charged before the first use; this will take about 2 hours. Connect the Type-C USB end of the Cable included into the Type-C port on the charging case and the other end to a compatible USB wall charger or PC. While charging the LCD screen will show the percentage of the battery. Once the charging case is fully charged the LCD screen will show 100% charged.
Carefully disconnect both ends of the USB charging cable and store it safely
for future use. The Truebuds are each fitted with a 35 mAh rechargeable
battery (non-removable). It’s recommended that the battery is fully charged
before first use; this will take approx 1 hr. To Charge the Truebuds,
carefully place each Truebud into it’s respective earbud slot. Once the
Truebuds are placed in the charging case they will start to charge
automatically. The LED light on the bottom of both earbuds will light up red,
once they are fully charged the LED light will turn blue and then shuts off
after 5 seconds.
Product Specifications
| Bluetooth Version: | 5.0 |
|---|---|
| Bluetooth Frequency: | 2.4GHz |
| Bluetooth Range: | Upto30Ft |
| Battery Capacity: | Earbuds: 35 mAh |
| Case Capacity: | JOOmAh |
| Talk/ Play Time: | 2-3 hours |
| Standby Time: | 10 hours |
FAQ
I only hear music out of 1 ear?
ANS.
- Power off the BOTH TrueBuds manually by pressing and holding the touch control until you hear both Earbuds say power off, then place them back into the charging case.
- Delete I forget the TrueBuds from your Bluetooth Library or discovered device list, then switch off the Bluetooth function on your device.
- Take the earbuds out of the charging base, and both earbuds will start to flash red and blue rapidly.
- Don’t turn on the Bluetooth function until one of the earbuds stops flashing. (this step is basically pairing the 2 earbuds together, they need to pair together before you can pair them with your Bluetooth device)
- Turn the Bluetooth on and select the TrueBuds Air from the device list, and BOTH the voice prompt will say Bluetooth Connected successfully.
Why is there no power even when the Truebuds are Turned ON?
ANS. Ensure the battery has been charged up to 2 hours for initial use.
There is no sound during playback?
Ans. Check the connection between the Truebuds and your smart device if the
connection is not established please connect again. Make sure the Truebuds are
paired with your Bluetooth-enabled device.
Can I use 1 Truebud at a time?
Ans. Yes, if you would like to use only one Truebud at a time then simply turn
on the side that you want to use and make sure the otherTruebud is powered
off, your music and phone calls will only play in mono sound.
Support
If you have problems with your device, please consult the instructions in this manual.
Manufacturer Warranty
We stand by our products! That’s why we guarantee them from any functional
defects for one year from the original date of purchase. Should you have an
issue please email us at info@GabbaGoods.com or
visit us on the web at www.GabbaGoods.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>