motorola MOTO BUDS-S ANC True Wireless Earbuds User Guide
- June 6, 2024
- Motorola
Table of Contents
motorola MOTO BUDS-S ANC True Wireless Earbuds
MODEL: MOTO BUDS-S ANC
Frequency Band: 2.402 – 2.480 GHz
Maximum RF power < 10dBm
Working Temperature: -10oC – 45oC
FCC ID: 2ARRB-MBANC
IC: 20353-MBANC
Quick Start Guide
Charging:
Fully charge before use
The device can be powered through a Type-C from any CE-compliant power source
that implements the European interface as requested by EN 301 489-52.
Pairing:
Ensure both buds are inside the charging case with the lid closed then open up
the lid. The buds will flash blue and red.
Select “MOTO BUDS-S ANC” from the smartphone Bluetooth menu.
Fitting:
Insert the MOTO BDS into your ear and rotate to fit comfortably.
To optimize the best fit and audio experience, it is recommended to try different earbud sizes.
Basic Operation:
Additional Operation
Factory reset| Switch off both buds, then hold both MFB for 5 sec until the
indicator shows RED & BLUE, press MFB rapidly for 4 times
Reject a call| MFB 2sec
Voice command| MFB 2sec (R bud) (Android and iOS)
ANC ON_Transparent
_ANC OFF
|
Double press MFB (L Bud) to toggle between ANC ON->Transparent mode –
ANC OFF mode
LED Indicator (earbud)
Pairing| Red-blue flash
Standby| Blue flash
Charging| Red steady
Fully charged| Off
Battery low| Red flash
ANC ON| White steady
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>