xmartO BC3 Solar Battery Camera User Guide

xmartO BC3 Solar Battery Camera User Guide

www.xmarto.com

Packing list

The camera

Camera Indicator & Button Definition

Working diagram

First power recharge

Before setup of the camera, we strongly recommend to recharge the camera overnight to make sure it has 100% power.

1. Open the rubber cover beneath the camera, use a 5V DC mobile phone power charger to charge your camera.
2. The indicator blinks in green while charging; indicator turns off when it’s fully charged.

Note :

• Please use only 5V DC power charger to recharge the camera. Chargers do not meet the standard may damage the batteries.
• Please charge the battery at room temperature to avoid damage.

Setup the camera – works as standalone camera

1. Install App
On your iPhone or Android phone, download and install App ‘xmartO WallPixel’.

You can scan the QR code to find the App, or search ‘xmartO Wall Pixel’ in App Store/ Google Play.

After App installed, spend a few minutes to create an App user account and login.

2. Add the camera to App

• Bring the camera and your smartphone close to your WiFi router.

• Open the rubber cover beneath the camera, hold the ON/OFF button for 2 seconds to turn on the camera.

You should hear ‘starting paring’ from the camera; and the indicator blinks in red. That means the camera enters pairing mode.

If the camera did not enter pairing mode, hold the reset button for 5 seconds to bring camera into pairing mode.

• Run xmartO App

Pair the camera to a WiFi NVR (optional)

1. Bring the camera close to your WiFi NVR.

2. Open the rubber cover beneath the camera, hold the ON/OFF button for 2 seconds to turn on the camera.   You should hear ‘starting paring’ from the camera; and the indicator blinks in red. That means the camera enters pairing mode.
   If the camera did not enter pairing mode, hold the reset button for 5 seconds to bring camera into pairing mode .

3. On the NVR screen, right click menu -Add Cam by WiFi. The camera will be paired to the NVR within a minute.

Tips : make sure your NVR has an empty channel for the new camera.

Pair the camera to mini WiFi hub (optional)

1. Hold the camera’s reset button for 5 seconds to bring camera into pairing mode.
2. On the mini WiFi hub, hold SYNC button for 3 seconds to bring the hub to pairing mode. You should hear ‘Start matching code’.

Within a minute, the camera should be paired to the hub. One of the LEDs on hub should turns to solid green.

Install the camera

1. Unscrew the bracket from the camera. Use a pencil to mark screw holes on the wall.
2. Fix the bracket on the wall with 3 screws.
3. Attach the camera to bracket and adjust the view angle.
4. If you use a solar panel, mount the solar panel and plug to the camera. Adjust the panel so it captures good sunlight.

PIR sensor is sensitive to heat changes, please note:

• Avoid installing the camera where has complicated air flows.
  For example: the air vent of an air conditioner, the side of a fan etc.

• Please do not install the camera against glass or a mirror.

• While installing, avoid lining up the camera with a path. Keeping some angle will help the camera to sense people.

• Do not install the camera upside down. {PIR sensor is the downside.)

App – Camera List

1. Group. With group, you can group multiple cameras to a quad view or multiple view. Then you can view multiple cameras simultaneously with one tap.
2. Camera name, network status
3. Quick menu to recorded photos & videos, edit/delete camera.
4. Share device with families or friends
5. Alarm messages
6. Video playback
7. Camera settings

App – Live Footage

App – Video Playback

In camera list, tap Playback to play camera’s recorded videos.

Make sure you have Micro SD card in the camera.

Camera Settings

In camera list, tap Setting to enter camera settings.

Motion Detection Management

Camera Light Control

IR mode : Use IR LEDs at night. Image is in B&W.

Flood Light Mode : Flood lights turn on when people detected at night. Night vision image is in color.

Me – APP Overall Settings

App Setting

Troubleshooting

FAQ

Q; Why does the battery run out quickly?

A:

1. The battery will run out faster if there are more activities everyday. Please check if there are unnecessary video clips in messages. Try to lower the motion detection sensitivity if necessary.
2. Check if the camera is having weak WiFi signal to the router or NVR. You can try to change the WiFi channel of the WiFi NVR or router; or adjust the positions of the NVR, router or camera to improve the signal transmission.

Q: How to check the connection status between the camera and the router (or NVR)?

A:

1. Move in front of the camera to trigger the PIR sensor. If the camera flashes in red, it means that the camera cannot connect to the router or wireless NVR smoothly.
2. If the camera is working with a WiFi NVR, try to replay the camera from NVR to see if the videos replay normally. While replaying the camera, the camera’s indicator should stay on.

Q: What should I do if I forget my password?

A:

1. If you forgot the login password of your App account, please reset the password through the “Forgot Password” option in the login interface of App.
2. If you forgot the camera’s access admin password, the only way to restore the password is: take the camera down, reset it and pair the camera to network again; then set a new password in camera setting.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

FCC NOTICE
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC CAUTION
Caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : While using the product, please comply with your local laws and regulations of audio & video devices.

If you have further questions, please refer to help center at, www.xmarto.com or contact us at support@xmarto.com

Thank you!

www.xmarto.com support@xmarto.com

Website : www.xmarto.com
Support : support@xmarto.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>