ROUGH COUNTRY Polaris 2021 RZR 1000 Rear Slim Line Light Mount User Manual
- June 16, 2024
- Rough Country
Table of Contents
ROUGH COUNTRY Polaris 2021 RZR 1000 Rear Slim Line Light Mount
Thank you for choosing Rough Country for all your vehicle needs. Please read instructions before beginning installation. Check the kit hardware against the kit contents shown below. Be sure you have all needed parts and know where they go. If question exist, please call us 1-800-222-7023. We will be happy to answer any questions concerning this product. Check all fasteners for proper torque. Check to ensure for adequate clearance between all components. Periodically check all hardware for tightness.
KIT CONTENTS
- 10” Single Row LED
- Light Kit x1
- Brackets x2
TOOLS NEEDED
- T35 Torx Bit
Torque Specs
- Size Grade 5 Grade 8 Size Class 8.8 Class 10.9
- 5/16” 15 ft/lbs 20ft/lbs 6MM 5ft/lbs 9ft/lbs
- 3/8” 30 ft/lbs 35ft/lbs 8MM 18ft/lbs 23ft/lbs
- 7/16” 45 ft/lbs 60ft/lbs 10MM 32ft/lbs 45ft/lbs
- 1/2” 65 ft/lbs 90ft/lbs 12MM 55ft/lbs 75ft/lbs
- 9/16” 95 ft/lbs 130ft/lbs 14MM 85ft/lbs 120ft/lbs
- 5/8” 135ft/lbs 175ft/lbs 16MM 130ft/lbs 165ft/lbs
- 3/4” 185ft/lbs 280ft/lbs 18MM 170ft/lbs 240ft/lbs
INSTALLATION INSTRUCTONS
- Clean any debris from the rear of the UTV. Locate the (2) Bolts in the lower trim panel. See Photo 1.
- Remove the bolts from both sides of the lower trim panel using a T35 Torx bit. See Photo 2.
- Place the OE bolt through the bracket using the hole away from the bend in the bracket. Snug the bracket toward the center of the UTV. See Photo 3.
- Mount the opposite side bracket using the OE bolt toward the center of the UTV.
- Place the light in-between the brackets, use the supplied bolts in the light kit to secure the light to the brackets. See Photo 4
- Tighten the (2) bracket bolts using a T35 Torx bit. See Photo 5.
- Connect the lights wiring harness to the UTV’s power supply. Then adjust the light to the desired angle and tighten to the brackets. See Photo 6.
By purchasing any item sold by Rough Country, LLC, the buyer expressly
warrants that he/she is in compliance with all applicable, State, and Local
laws and regulations regarding the purchase, ownership, and use of the item.
It shall be the
buyers responsibility to comply with all Federal, State and Local laws
governing the sales of any items listed, illustrated or sold. The buyer
expressly agrees to indemnify and hold harmless Rough Country, LLC for all
claims resulting directly or indirectly from the purchase, ownership, or use
of the items.