ROVACS RV220 Air Purifier Instruction Manual

ROVACS RV220 Air Purifier

Safety Warning

You must observe the following safety precautions and read the relevant instructions carefully when using this product!

Prohibition
Any content with this mark must be prohibited, otherwise it may cause damage to the product or endanger the user’s personal safety.
Warning
Any content with this mark must be operated in strict accordance with the requirements, otherwise it may cause damage to the product or endanger the user’s personal safety.
Important
Any content with this mark must be paid attention to, otherwise it may cause damage to the product or other losses due to improper use.

• Do not touch the power plug with wet hand.
• Do not clean or reuse the high efficiency composite mesh.
• Only configured power cable can be used.
• Please be careful when cleaning the air purifier. Strong corrosive detergent will damage the surface of the device.
• Remove the plug from the power socket when cleaning or not using the machine. Otherwise, it may cause electric shock due to loose connect or cause fire due to short circuit.
• Do not block the air inleUoutlet.
• Do not use the product in rooms with greasy particles or moisture like shower room.
• Please remove the dust from the body and power plug periodically.
• Do not use the product near or on heat source objects (such as fireplace, heater or places that may be exposed to flammable gas).
• This product is not suitable for the physical disabled, the visual disabled, the mental disabled and children unless the safety responsible person on the spot for supervision and provide guidance.

Product Component

Product Component and Name

1. Base
2. Composite filter
3. Host
4. Power Cable The image shown here is indicative only. If there is inconsistency between the image and the actual product, the actual product shall govern.

Packing List

• RV220 Host: 1 Set
• Composite Filter: 2 Sets (Loaded into the machine)
• Power Cable: 1 Piece
• Instruction Manual: 1 Set

Features

Combine Multiple Functions

• Efficiently purifier PM2.5, smoke, pollen, and other particulate pollutants.
• 5-speeddesign.
• Time setting function.
• Filter replacement display.
• Equipped with manual, automatic, and sleep operation modes.
• Child lock function.
• Real-time display of PM2.5 value.

Instructions

Using Caution

• All filters are included inside this air purifier.
• Please make sure the packaging film on the filter is removed and the filter installed correctly before using.

Install the Filter

1. Unscrew the knob on the base according to the product label.
2. Remove the base.
3. Take out the new filter screen with plastic film in the machine.
4. Remove all packaging film on the filter.
5. Load the new filter which has removed the plastic film into the machine.
6. Cover the base and tighten the knob according to the direction indicated

Getting started

1. When powered on, the buzzer gives a “Ding”sound.
2. Touch the power switch to turn it on.
3. The screen lights up and the machine enters into working state. Real-time Display of Air Quality
4. The color of the air sensing indicator light changes with the change of PM2.5 index in the air. The colors are green, blue, yellow and red respectively.

Display States

• PM2.5 display status (Automatic mode) (Manual mode)
• Wind speed display status
• Timing boot state
• Timing shutdown state
• Sleep mode state

Button Operation and Display Symbols

Display Symbols and Meanings

Symbols/Symbol Names /Meanings

/ON/OFF /In the standby state, tapping the button will turned on the purifier and the symbol will full light. In the working state, tapping the button will enter standby state and the symbol will haft light.

/ Automatic /In the working state, tapping the button can switch the working mode between automatic and manual. The symbol will full light in automatic mode, and half light in manual mode. In automatic mode, The machine will automatically adjusts to the corresponding wind speed gear according to the PM2.5 particle value detected by the internal sensor (see p10 for the corresponding relationship).

/ Wind Speed /In the working state, tapping the button can switch to manual mode, and the symbol will full light. Each time the button is touched, the wind speed gear is increased by 1 level, and the gear is cycled between 1-2-3-4-5-1 level.

/ Sleep /In the working state, after switch into sleep mode by tapping the Sleep button, the fan will run at 1 gear speed, all symbols will light-off except the sleep mode indicator light-on for 10 seconds. In the sleep mode, touch any button to wake up the air purifier, and the sleep mode indicator will be full light. Touch any button again will exit the sleep mode and return to the machine state before sleep.

/ Child Lock / In the working state, long press the child lock button (more than 3S) to switch the child lock state between off and on. When the child lock function is turned on, the symbol is full light, and all other buttons cannot be operated. When the child lock function is off, the symbol is half light.

/ Timing Setting / Timing shutdown: In the working state, the Timing Setting symbol will flash after tapping the button, re-tapping this button within 3 seconds will enter the setting state of the timing shutdown. The Timing Setting symbol will full light, every tapping of the button, the timing value circulates between 2H-4H-6H-8H-0h, and the timing shutdown
setting will completed after stop tapping the button.
Timing boot: In standby state, the Timing Setting symbol is half light, and flashes when tapping the button. Re-tapping this button within 3 seconds will enter the setting state of
the timing boot, and the Timing Setting symbol will full light, every tapping of the button, the timing value circulates between 2H-4H-6H-8H-0h, and the timing boot setting will completed after stop tapping the button.

/ Screen Off / In the working state.tapping the button to switch the screen between on and off. In screen off state, all symbols will light off except the screen off symbol light for 10 seconds. In the screen off state, tapping any button to exit the closing mode and return to the machine state before sleep.

/ Filter Reset / The filter life is defined as 3000 hours, and the filter life indicator is reduced by one frame for every 600 hours of filter life. When the remaining filter life is less than 150 hours, the Filter Reset indicator and last frame of Filter Life indicator will flashing to remind user to replace the filter until the filter life is reset and Filter Life indicator lights are all on.Filter life reset: when the
filter life is more than 150 hours, long press the Filter Reset button can not reset the life of the filter, only a “Ding” sound is emitted. When the filter life is less than 150 hours, press and hold the Filter Reset button (more than 3S) can reset the filter life and the Filter Life indicator lights will all on.
Forced filter life reset: within 30s of power on, the filter life will reset with a “Ding” sound after long press the Automatic button and Sleep button (more than 3S) in standby state. The screen will flashes for 6 times to indicate that the filter life is resetting, and the Filter Life indicator lights will all on.

Cleaning and Maintenance

The machine must be unplugged before maintenance.

1. Clean the Body

2. Use soft cloth to wipe off stains.

3. Dip an appropriate mild detergent on soft cloth to wipe off the stubborn stains.
   Note: Do not scratch the machine shell with hard objects during maintenance. Please operate according to the instructions and do not damage the machine parts when removing the front cover.

4. Replace and Cleaning Filter

5. The filter life is different due to different using environment. Please replace the filter timely according to the sound and smell produced by the machine.

6. When the surface of the primary filter is dusty, clean it with soft cloth can extend the filter life.

7. High-efficiency composite filter is recommended to be replaced upon expiration. The filter replacement cycle may be shorted or extend due to different use methods and places.Filter life can be extend in special environment.
   Please dispose the used filters as combustible rubbish.

Replacing Filter

1. Turn off the knob according to the direction of product identification.
2. Remove the base.
3. Take out the failed strainer.
4. Remove the packaging film from the new screen.
5. Install a new strainer.
6. Cover the base and tighten it, then, reset the screen life.
7. Plug in the adapter.
8. Reset the screen life in standby state according to the operation instructions. (Refer to page P7 for instructions.)

Technology and Specifications

Specifications

• Model: RV220
• Rated voltage: 24V=1.0A
• Rated power: 24W
• Noise: 53dB
• Clean Air content (cigarettes): 130CFM
• Clean Air content (pollen): 130CFM
• Clean Air content (dust): 130CFM
• Net Weight (include filter): 3kg
• Gross Weight: 3.8kg
• Product Dimensions: 220x220x343mm
• Package Dimensions: 260x260x443mm

Common Problems and Solutions

Symptom/Possible Causes /Obviation Methods

• Product does not work properly/Connection problem /Please make sure that the plug is inserted into the socket and that the ON/OFF button is turned on.
• Fresh air cannot be delivered smoothly from the air outlet/
  1. The plastic packaging of the new filter is not been removed.
  2. The air outlet of the purifier is blocked by foreign matters.\
  3. Please remove the plastic packaging.
  4. Please remove the foreign matters.
• Abnormal noises during operation/
  1. The air inlet or outlet is blocked by foreign objects.
  2. Foreign matters fall into the air duct of the machine./
  3. Please remove the blocking objects.
  4. Please remove the foreign matters that have fallen in.

Warranty

Warranty Period and Component Warranty Period

• Product: RV220
• Warranty Period: 1year (household use only)
• Component Warranty: 1year

1. This product has passed strict quality inspection.
2. During the warranty period, the company will be responsible for the free maintenance if there is any performance or function failure under normal use. A replacement will be provided if the failure can not be repaired.

We will provide paid maintenance services if machine failure caused by following reasons:

1. Poor performance and machine failure after warranty period.
2. Machine failure caused by improper application.
3. Failure caused by repairing privately in the sales service center or agent not designated by our company.
4. Failure due to nonconformity of power supply or poor quality of power socket (not covered under warranty).
5. Product failures or defects due to natural disasters.

If you have a problem that is not listed above, or you have another problem that you would like to consult.
You can do the following:

1. Contact Amazon’s Seller with your order number, for exemple: 113-0965983-348xxxx
   Then you will get all the help within 24H

2. Contact our brand official email: [email protected]
   Again, we will give you a satisfactory reply within 24 hours
   Thank you for your patience and support!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>