ATH KN+ Series Condensing Cast Iron Boiler Instructions
- May 15, 2024
- ATH
Table of Contents
ATH KN+ Series Condensing Cast Iron Boiler
Product Information
Specifications
- Product Name: ATH KN, KN+ Series HeatNet V3
- Model: KN, KN+
- Version: V3
- Release Date: March 7, 2017
Product Usage Instructions
BACnet Configuration
The ATH KN, KN+ Series HeatNet V3 supports BACnet configuration for
seamless integration with building automation systems. Follow the steps below
to configure BACnet settings:
- Access the control panel of the device.
- Navigate to the BACnet configuration menu.
- Set the desired BACnet properties such as IP address, device ID, and network settings.
- Save the changes and restart the device for the new settings to take effect.
Revision History
The product’s revision history provides details on software updates and
fixes. Refer to the following revision history:
- Version 1.13 (3/7/2017): Fixed an issue with reading/writing negative values for OARLowAirTemp.
- Version 1.10 (7/2/2014):
- Added various analog inputs and binary variables for improved system monitoring.
- Version 1.00: Initial Release
Frequently Asked Questions (FAQ)
Q: How do I update the firmware on the ATH KN, KN+ Series HeatNet V3?
A: To update the firmware, follow these steps:
- Download the latest firmware version from the manufacturer’s website.
- Access the device’s control panel and navigate to the firmware update section.
- Select the downloaded firmware file and initiate the update process.
- Wait for the update to complete and restart the device if required.
Q: Can I integrate the ATH KN, KN+ Series HeatNet V3 with third-party
building automation systems?
A: Yes, the ATH KN, KN+ Series HeatNet V3 supports BACnet
configuration, allowing seamless integration with various building automation
systems compatible with BACnet protocol.
ATH KN, KN+ Series
HeatNet V3 BACnet Configuration Revision History
Version 2.00 – 06/15/2023
-
Fixed cycles so that boilers 9-16 are updated and available.
-
Fixed runtime so that boilers 9-16 are updated and available.
-
Renamed SPARE1 to DHWTemp.
-
Rename SPARE2 StackTemp.
-
Added AddBoilerTimer (Master Only)
-
Added ShedBoilerTimer (Master Only)
Version 1.20 – 10/3/2019 -
Added Local Flow sensor Input Register
Version 1.13 (3/7/2017)
Fixed an issue with reading/writing negative values for OARLowAirTemp.
Version 1.12 (11/5/2014)
- Fixed an issue that prevented reading many of the status bits for boilers 9 – 16.
Version 1.10 (7/2/2014)
- Added BTUH (analog_input)
- Added SystemReturnTemp (analog_input)
- Added SystemFlow (analog_input)
- Added HeatingBoilersOn (analog_input)
- Added DHWBoilersOn (analog_input)
- Added ManualBoilersOn (analog_input)
- Added Boiler##_StackSensorNA (binary_variable)
- Added Boiler##_SysReturnSensorNA (binary_variable)
Version 1.00
Initial Release
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>