ecler VEO-AXS4P HDMI 2.0 Audio Extractor User Manual

ecler VEO-AXS4P HDMI 2.0 Audio Extractor

Product Information

• Product Name: VEO-AXS4P
• Product Type: Audio Extractors HDMI 2.0 audio extractor
• Model Number: 50-0389-0101
• Manufacturer: NEEC AUDIO BARCELONA, S.L.
• Product Manual: Download Manual

Product Usage Instructions

1. Read the user manual carefully before proceeding with any connections to ensure optimal use and performance of the VEO-AXS4P HDMI 2.0 audio extractor.
2. Ensure that the equipment is not exposed to rain or moisture to prevent fire or shock hazards.
3. Connect the audio extractor to a mains socket-outlet with a protective earthing connection for Class I construction.
4. Keep the audio extractor away from water and do not block any ventilation openings.
5. Avoid installing the audio extractor near heat sources such as radiators, heat registers, stoves, or other heat-producing apparatus.
6. Do not defeat the safety purpose of the polarized or grounding type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement.
7. Protect the power cord from being walked on or pinched, especially at the plugs, convenience receptacles, and where they exit from the apparatus.
8. Only use attachments/accessories specified by the manufacturer.
9. Unplug the apparatus during lightning storms or when unused for long periods of time.
10. Refer all servicing to qualified personnel. Servicing may be required when the product is damaged or malfunctions.
11. Do not discard the product as unsorted urban waste. Take it to the nearest electrical and electronic waste treatment Centre.

For any maintenance or warranty-related queries, please contact our authorized Technical Services or refer to the warranty card included with the product.

IMPORTANT REMARK

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING (If applicable): The terminals marked with symbol of may be of sufficient magnitude to constitute a risk of electric shock. The external wiring connected to the terminals requires installation by an instructed person or the use of ready-made leads or cords.
WARNING: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
WARNING: An apparatus with Class I construction shall be connected to a mains socket-outlet with a protective earthing connection.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug the apparatus during lightening sorts or when unused for long periods of time.
13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. Disconnecting from mains: Switching off the POWER switch all the functions and light indicators of the amplifier will be stopped, but fully disconnecting the device from mains is done unplugging the power cord from the mains input socket. For this reason, it always shall remain readily operable.
15. Equipment is connected to a socket-outlet with earthing connection by means of a power cord.
16. The marking information is located at the bottom of apparatus.
17. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

WARNING: This product must not be discarded, under any circumstance, as unsorted urban waste. Take to the nearest electrical and electronic waste treatment centre.

NEEC AUDIO BARCELONA, S.L. accepts no liability for any damage that may be caused to people, animal or objects due to failure to comply with the warnings above.

IMPORTANT NOTE
Thank you for choosing our Ecler VEO-AXS4P HDMI 2.0 audio extractor!
It is VERY IMPORTANT to carefully read this manual and to fully understand its contents before any connection in order to maximize your use and get the best performance from this equipment.
To ensure optimal operation of this device, we strongly recommend that its maintenance be carried out by our authorised Technical Services.
All ECLER products are covered by warranty, please refer to www.ecler.com or the warranty card included with this product for the period of validity and conditions.

INTRODUCTION

Ecler VEO-AXS4P is a professional HDMI audio extractor that allows to de-embed audio from a HDMI signal, including audio from 4K sources. VEO-AXS4P provides uncompressed LPCM analogue stereo signal through RCA and Phoenix balanced output as well as Dolby Digital and DTS multichannel signals through the coaxial S/PDIF digital output. VEO-AXS4P is HDCP 2.2 and HDMI 2.0 compliant, supporting data rates up to 18 Gbps and video resolutions up to 4K/60Hz with 4:4:4 chroma sample and HDR contents.

Features:

• Audio EDID Settings: Auto/2.0 CH/5.1CH
• Extracts the digital HDMI audio signal from the HDMI input to 2 channel analog stereo output or to 5.1 S/PDIF output
• Signal amplification and equalization to extend HDMI input and output ports up to 10 meters (33 feet)
• Supports LPCM, Dolby Digital and DTS
• Supports resolution up to 4K@60Hz YUV4:4:4
• Supports deep colour up to 36bit
• Supports samplerate up to 192 KHz and resolutions up to 24 bit
• HDCP2.2/1.4 Compliant
• Supports CEC

PACKAGE CONTENTS

• 1 x Main Unit: 4K HDMI Audio Extractor
• 1 x International DC 5V Power Supply

PANEL DESCRIPTIONS

Frontal Panel

1. Power/HDMI Status Indicator
2. Audio EDID selector
3. HDMI 2.0 Input
4. Micro USB (Reserved)
5. 12V DC Input connector

Rear Panel

1. HDMI 2.0 Output
2. Balanced Stereo Audio Output
3. Unbalanced Stereo Audio Output
4. S/PDIF Coaxial Output

CONNECTION AND INSTALLATION

1. Connect a HDMI signal source (such as Blue Ray Player, STB etc) into the HDMI input of VEO-AXS4P.
2. Connect a HDMI display device (such as a 4K or Full HD display) to the HDMI output of VEO-AXS4P.
3. Connect S/PDIF audio cable or a Balanced/Unbalanced analogue audio cable to an amplifier or other audio devices input.
4. Connect the 5VDC power supply to the VEO-AXS4P 4K HDMI Audio Extractor.

APPLICATION DIAGRAM

TECHNICAL SPECIFICATIONS

• Max Resolutions 4K@60Hz 4:4:4
• Color space RGB, YCbCr
• Color depth 8-bit, 10-bit, 12-bit
• Signal Bandwidth 18 Gbps
• CEC Pass Through
• HDCP 2.2/1.4 Compliant
• HDR HDR10
• Audio Formats LPCM 2.0, LPCM 5.1, Dolby Digital, DTS-HD Master Audio, Dolby true-HD
• Audio Bit Depth Support of 24-bit
• Sample Rate 32KHz, 44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz
• Distance HDMI up to 10 meters with Ecler VEO cables
• Operating Temperature -10°C to 55°C 14°F to 131°F
• Humidity 10 to 90% non-condensing
• Power Consumption 3 W Max
• Supply Input AC 100V ~ 240V 50/60Hz Output: DC 12V — 1A
• Dimensions L x W x H 129 x 21.5 x 77 mm (5.08” x 0.85” x 3.03”)
• Weight 244 g (0.538 lbs)

All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.
For technical queries contact your supplier, distributor or complete the contact form on our website, in Support / Technical requests.
Motors, 166‐168 08038 Barcelona ‐ Spain ‐ (+34) 932238403 | information@ecler.com | www.ecler.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>