nedis PIP30012FBK Pure Sine Wave Inverter User Guide

nedis PIP30012FBK Pure Sine Wave Inverter

Product Information

• Specifications
  • Product: Power Inverter (300 Watt)
  • Model: Pure Sine Wave PIP30012FBK
  • Website: ned.is/pip30012fbk
  • The Power Inverter (300 Watt) model PIP30012FBK is designed for precision measuring equipment.
  • It is intended for indoor use only and is not suitable for professional use.
  • Any modification to the product may impact safety, warranty, and proper functioning.
• Safety Instructions
  • WARNING: Only perform maintenance on the product when it is unplugged to reduce the risk of electric shock.
• Mounting the Power Inverter
  • Keep at least 50cm of space between the rear fans and the wall. Follow these steps to mount the power inverter:
  • Hold the power inverter in the desired position.
  • Mark four holes using the inverter as a template.
  • Drill the holes and mount the inverter using screws.
• Connecting the Power Inverter
  • Wear protective gloves and use insulated tools when connecting power cables. Follow these steps:
  • Connect power cables A2 to the cable terminals B1B2 at the rear of the inverter.
  • Connect the other end of the cables to a 12V battery system, ensuring correct polarity.
• Powering a Socket Device
  • Ensure the target device is off before connecting. Follow these steps:
  • Plug the device into the power socket B4.
  • Switch on the power using B6.
  • Do not exceed 80% load during long use.
• Powering a USB Device
  • Connect a USB cable to port B8B9, then to your device. Switch on using B6. Do not overload the inverter.
• Troubleshooting
  • Check indicator LEDs and alarms for issues. Refer to the table below for solutions based on LED combinations and sounds.

FAQs

• Q: What should I do if my target device is not receiving power from the inverter?
  • A: Check the indicator LEDs and listen for alarms as per the troubleshooting guide provided. Ensure proper connections and load limits are observed.

Power Inverter (300 Watt)

• For more information see the extended manual online: ed.is/pip30012fbk.

Intended use

• This product is a power inverter to convert 12 V DC to 230 V AC.
• Only use this product in combination with class II devices.
• Do not use this product with:
• Devices that exceed the rated power of the inverter.
• Capacitive and perceptual load devices such as air conditioning, high power drills, fridges, microwave ovens, or blenders.
• Devices that have strict power supply requirements, such as precision measuring equipment.
• The product is intended for indoor use only.
• Any modification of the product may have consequences for safety, warranty, and proper functioning.
• The product is not intended for professional use.

Main parts (image A)

1. Power inverter
2. Power cables

Main parts (image B)

1. Cable terminal +
2. Cable terminal –
3. Ground
4. Power socket
5. Power indicator LED
6. Power switch
7. Fault indicator LED
8. USB port
9. USB-C port

Safety instructions

WARNING

• Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
• Only use the product as described in this document.
• Do not install the product next to flammable materials.
• Do not place the product in areas with high temperatures or direct sunlight.
• Do not cover or obstruct the ventilation openings on the product.
• Do not immerse the product in water or other liquids.
• Do not expose the product to water, rain, moisture, or high humidity.
• Do not operate the product close to combustible gas or open fire.
• Do not operate appliances that may feed power back into the power inverter.
• Do not open the product, there are no user-serviceable parts inside.
• Disconnect the product from the power source before cleaning.
• Disconnect the product from the power source before service and when replacing parts.
• Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
• Do not let children play with the packaging material. Always keep the packaging material out of the reach of children.
• Always keep the power cable and the product away from the usual walkways.
• Do not drop the product and avoid bumping.
• Do not use aggressive chemical cleaning agents when cleaning the product.
• This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.

Mounting the power inverter
Keep at least 50cm of space to the wall from the fans on the rear of the power inverter.

1. Hold the power inverter in the desired position.
2. Mark four holes with a pencil using the power inverter as a template.
3. Drill the holes using a power drill and a drill bit.
4. Mount the power inverter to the desired position using screws.

Connecting the power

Connecting the power inverter (Image C)

• Wear protective gloves when installing the power cables.
• Use tools with insulated handles when installing the power cables.
  1. Connect the power cables A2 to the cable terminals on the rear of the power inverter B1B2.
  2. Connect the other end of the power cables to a 12 V battery system.
• Make sure the polarity matches the polarity of the battery.

Powering a socket device

• Make sure the target device is switched off before connecting it.
  1. Plug the power plug from a target device into the power socket B4.
  2. Set the power switch B6 to ON.
  3. The power indicator LED B5 switches on.
• Do not load the power inverter more than 80% during long use (>1 hour).

Powering a USB device

1. Plug a USB cable into the USB port B8B9 of the power inverter.
2. Plug the other end of the USB cable into your target device.
3. Set the power switch B6 to ON.
4. The power indicator LED B5 switches on.

Troubleshooting

If the target device is not receiving power, look at the indicator LEDs and listen for alarms. The table below shows what the combinations of lights and sounds mean.

Power LED| Fault LED| Alarm| Possible cause| Possible Solution
---|---|---|---|---
Off| Off| No| The power inverter is switched off| Switch on the power inverter.
 |  |  | The battery is empty.| Recharge the battery.
 |  |  |  | Replace the battery.
On| Off| Yes| Low voltage alarm| Recharge the battery.
 |  |  |  | Replace the battery.
On| Off| Yes| Low voltage shutdown| Recharge the battery.
 |  |  |  | Replace the battery.
On| On| No| Over voltage shutdown| Check the battery voltage. The power inverter will function as normal again when the voltage is within the specified range.
Power LED| Fault LED| Alarm| Possible cause| Possible Solution
---|---|---|---|---
On| On| No| Overload protection| Reduce the load on the power inverter.
On| On| Yes| High tem- perature shutdown| Let the product cool down. The power inverter will function as normal again when it is cooled down.
On| On| No| Output short circuit| Remove the target device from the power inverter. Check the device for short circuits. Remove the short circuit from the output and restart the power inverter to resume normal functioning.

Disposal

• The product is designated for separate collection at an appropriate collection point.
• Do not dispose of the product with household waste.
• For more information, contact the retailer or the local authority responsible for the waste management.

CONTACT

• Nedis BV
• De Tweeling 28, 5215 MC ’s-Hertogenbosch
• The Netherlands
• service@nedis.com.
• ned.is/pip30012fbk.
• Pure Sine Wave PIP30012FBK

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>