iCT H6253B-R Coin Hopper Installation Guide
- June 13, 2024
- ICT
Table of Contents
iCT H6253B-R Coin Hopper
Use of Materials Limitations
- International Currency Technologies Corporation (ICT) all rights reserved.
- All materials contained are the copyrighted property of ICT.
- All trademarks, service marks, and trade names are proprietary to ICT.
- ICT reserves the right at all times to disclose or to modify any information as ICT deems necessary to satisfy any applicable law, regulation, legal process or governmental request, or to edit, refuse to post or to remove any information or materials, in whole or in part, in ICT’s sole discretion.
Introduction
Overview
JMH Coin Hopper is a single denomination coin dispensing unit. Users can
adjust coin dimension with different coin adjustment points. The design of JMH
Coin Hopper is easy operated, trouble-free and high reliable.
Features
- Double sensors, double protection.
- Easy maintenance.
- Easy installation.
- Coin size adjustable.
- Advanced low level coin detection.
- Compact design with enormous capacity.
Specifications
General
- Dispensing Speed 13 coins/second
- Counting Method Obstruct Sensor
- Interface Hopper Mode
- Installation Indoor
Electrical
- Power Source 24V DC(22.8~25.2V DC)
- Power Consumption
- 5V DC-Standby: ?0mA, 0.4W
- 24V DC-Standby: N/A
- Operation: 0.9A, 20.4W
- Maximum: ?A, N/A
- Operation Environment
- Storage Temperature: -20°C~ 70°C
- Operating Temperature: 0°C~55°C
- Humidity: 20%~90% RH(no condensation)
Mechanical
- Coin Capacity (coins) Coin Box-Approx.300~350
- Applicable Coin Size
- (Diameter) 21.0mm~ 26mm
- (Thickness) 1.6mm~ 2.3mm
- Low Level Coin detection Optional
- Weight Approx. 2.3kg
- Outline dimension Refer to page.4
Packing List
- Main JMH Coin Hopper
- Accessory
- Harness: Refer to 5-1.
- JMH Coin Hopper Installation Guide
Dimension
Adjustment Coin Dimensions
Installation
With Motor control board Connection
Without Motor control board Connection
1/0 Circuit
Hopper Interface.
Credit Output Setting
Please setup credit voltage according to input voltage, the default value is suggested; for exceptions, please contact ICT.
Maintenance
To make sure JMH Coin Hopper always works smoothly, please clean the internal
parts from every two weeks to every two months.
Please make sure JMH Coin Hopper is OFF before cleaning.
To clean the internal parts:
- Remove the coin box backward and spin it to fix
- Spin the coin box anticlockwisely to take it out upward.
- Use a cross-head screw driver to take the turntable out.
- Use a soft brush or low-pressure air to clean dust on the panel
Maintenance Notice
(Any improper maintenance will result invalid warranty.)
- Recommended Mild, non-abrasive, soap water.
- DO NOT USE Organic solvent , Alcohol, Volatility liquid.
No.28, Ln. 15, Sec. 6, Minquan E. Rd., Neihu Dist., Taipei City 114, Taiwan
sales@ictgroup.com.tw (For Sales)
fae@ictgroup.com.tw (For Customer Service)
Website: www.ictgroup.com.tw
© 2010 International Currency Technologies Corporation
V.3.0 Part Number: H6253B-R
www.ictgroup.com.tw