SereneLife SLX1SC Hydraulic Door Stopper Instruction Manual
- June 1, 2024
- serenelife
Table of Contents
SereneLife SLX1SC Hydraulic Door Stopper
Specifications:
- Detachment positioning force: 6.47 N/16 lbs
- Trigger force: 19/16 lbs
- Buffering Stroke: 13/16″
- Applicable environment: Indoor
- Total Stroke Lifespan: 121/32″
- Applicable Range: Doors
Product Information
The Door Suction Base is designed to securely hold doors in place, preventing them from slamming shut. It consists of a base and a suction head that work together to provide a reliable door stopper solution.
Product Usage Instructions
Installation Steps:
- Determine the installation position for the Door Suction Base.
- Clean the installation position with a wet cloth and ensure it is dry.
- Peel off the double-sided tape on the bottom surface of the door suction base.
- Place the door suction on the floor with the suction head tightly attached to the bottom surface.
- Stick the 3M tape template on the floor along the edge of the door suction base.
- Press firmly on the product for 30 seconds. Let the tape remain static for at least 12 hours.
- Swing the door towards the closing direction and remove the door suction head horizontally along the floor.
- If readjustment is needed, use a tool to pull out the lock tongue if it is receded.
- Check to ensure that the roller and lock tongue are well aligned.
Abnormal Handling:
If the lock tongue is receded, peel off the tape and align the door suction head base with the 3M template position. Attach the door suction head to the floor and remove the 3M template tape after finishing.
If necessary, adjust the floor suction head by loosening the fixing screw for a 4mm adjustment.
FAQ:
-
Q: What should I do if the door suction does not hold properly?
A: If the door suction does not hold properly, try readjusting the position and ensuring that the roller and lock tongue are aligned correctly. If needed, adjust the floor suction head for proper alignment. -
Q: How long should I let the double-sided tape remain static for optimal strength?
A: Allow the double-sided tape to remain static for more than 12 hours to achieve the best strength after installation. -
Q: Can I use this product outdoors?
A: This product is designed for indoor use only, not suitable for outdoor environments.
Features
- Ensures the Door Open and Closes Smoothly
- Prevent Noise from Slamming Shut
- Made from High-Quality Carbon Steel & ABS
- Strong and Durable
- Easy to Install and Mount
- Suitable for a Wide Range of Door Types
- Smooth and Secure Open and Close with No Slamming
- Ideal for Quiet Environments Such as Libraries, Offices, and Residential Areas
What’s in the Box
- (1) Set of Hydraulic Door Stopper
Technical Specs
- Construction Material: Carbon Steel Suction Head, ABS Housing
- Total Item Length: 6.47″ -in.
- Weight Capacity: 180 lbs.
- Product Dimension (L x W x H): 6.47″ x 2.04 x 1.37″ -in.
| Detachment positioning force | 60-80N |
|---|---|
| Trigger force | 15-20N |
| Buffering Stroke | ≥ 5 x 6” |
| Applicable environment | -5°C to 40°C (23°F to 104°F) |
| Total Stroke | ≥ 15 x 16” |
| Lifespan | 100,000 cycles |
| Applicable Range | Interior doors |
Product Dimension
Questions? Comments?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Installation Steps
-
First, determine the installation position.
Clean the installation position with a wet cloth then make it dry. Peel off the double-sided tape on the bottom surface of the door suction base. -
Place the door suction on the floor as shown.
Note : The door suction head should be tightly attached to the bottom surface -
Stick the 3M tape template on the floor along the edge of the door suction base.
Note : After the product is pasted, press it firmly with your hand for 30 seconds. Allow the double-sided tape to remain static for more than 12 hours to achieve the best strength.
The fixed position of the tape should be kept dry. -
Swing the door towards the closing direction and take off the door suction head horizontally along the floor
-
Peel off the tape, align the door suction head base with the position of the 3M template and attach the door suction head to the floor. Peel off the 3M template tape after the finish.
-
If the lock tongue is receded as shown, use the tool to pull it out.
-
Check to ensure the roller and lock tongue is well aligned. Usually, the roller (position 1) of should be 1mm lower than the lock tongue (position 2).
-
If readjustment is needed, loosen the xing screw, the floor suction head can be adjusted by 4mm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>