K M 16019 Drink Holder Instruction Manual

: June 1, 2024
: K M

Table of Contents

K M 16019 Drink Holder
Product Information
Product Usage Instructions
FEATURES AND CAPABILITIES
SAFETY INSTRUCTIONS
INSTRUCTIONS FOR USE
MAINTENANCE, CARE
TECHNICAL DATA
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

K M 16019 Drink Holder

Specifications

Material: Cylinder, clamp: steel, powder-coated, black; Connecting elements: steel, galvanized; Base (insertion rail): glass fiber reinforced plastic handle, pressure plate: PA
Load: Bottles, glasses, and cups up to a diameter of 85 mm
Dimensions: Drink holder (cylinder): diameter: 85 mm, height: 56/71 mm; Clamp: t = 4 mm; Clamping range: max. 40 mm; Width: 28 mm, depth: 39 mm
Carton Weight: 0.34 kg

Product Information

INTENDED USE: Flexible and practical holder for bottles, glasses, and cups that can be clamped to desktops up to 40 mm thick

FEATURES AND CAPABILITIES

Sturdy and indestructible steel bracket
Quickly screwed on and off again thanks to user-friendly clamp
Frees your desk from spilled drinks (i.e. no more coffee in the keyboard)
With cut-outs for handles on cups and glasses
Inner diameter: 85 mm; height: 56/71 mm; weight: 0.34 kg

Product Usage Instructions

Safety Instructions

Components
Fastening

Instructions for Use

Components
First carry out a visual inspection to ensure all parts are complete and in good order.

a U-clamp with felt strip a.1
b Clamping screw with pressure plate b.1
c Cylinders with clearances for handles c.1
d Base (insertion rail)

Fastening
Make sure the desktop can support the bracket (max. 40 mm, horizontal alignment, load-bearing capacity).

Adjust the clamping screw to fit the thickness of the desktop.
Push the clamp up to the stop on the desktop.

Adjust Load (Cup)
The maximum container size is 85 mm in diameter. Ensure stability of container before use.

Maintenance and Care
During maintenance work, pay attention to possible hazards like jamming or bumping. Clean with a slightly damp cloth and a non-abrasive cleaning agent.

Frequently Asked Questions (FAQ)

Q: What should I do if the bottle, mug, or cup wobbles or is at an angle?
A: Check if the dimensions and shape of the load are suitable, ensure correct fit of base d (insertion rail), bring the desktop to a horizontal position, and tighten the clamping screw 2.3.
Q: What should I do if the clamp of the holder slips on the desktop?
A: Tighten clamping screw 2.3 and check the desktop for dirt and moisture.

16019 Drink holder
INTENDED USE

Flexible and practical holder for bottles, glasses, and cups that
can be clamped to desktops up to 40 mm thick

FEATURES AND CAPABILITIES

Sturdy and indestructible steel bracket
Quickly screwed on and off again thanks to user-friendly clamp
Frees your desk from spilled drinks (i.e. no more coffee in the
keyboard)
With cut-outs for handles on cups and glasses
Inner diameter: 85 mm; height: 56/71 mm; weight: 0.34 kg

Thank you for choosing this product. Please read and follow these instructions carefully. It informs you about all important steps necessary for safe installation and operation. We recommend that you keep them for future reference.

SAFETY INSTRUCTIONS

Check the holder for damage before use.
Damaged holders may no longer be used or only after a qualified repair.
The drink holder is used exclusively for holding drink containers. Other loads
are not permitted.
The more precisely the load fits into the cylinder, the more securely it is stored.
Small diameters, oversized heights, and uneven container bottoms are not well
suited for the holder. Because the boundaries are fluid, we recommend a “dry”
test beforehand.
Attach the clamp to the desktops with care (see Chapter 2)
Attach the clamp only to suitable desktops (i.e. load-bearing, level, horizontal,
non-slip)
Always remove the load before working on the clamp/clamping screw.

INSTRUCTIONS FOR USE

COMPONENTS
First carry out a visual inspection in order to ensure that all parts are complete and as far as recognizable, in good order.

a U-clamp with felt strip a.1
b Clamping screw with pressure plate b.1
c Cylinders with clearances for handles c.1
d Base (insertion rail)

FASTENING
First make sure that the desktop is suitable for supporting the bracket (i.e. max. 40 mm, horizontal alignment, load-bearing capacity).

$K-M-16019-Drink-Holder- $2$$

Adjust the clamping screw so that the opening of the clamp is a few millimeters 2.1 larger than the thickness of the desktop.
Push the clamp up to the stop on the desktop.
Now tighten the clamping screw firmly – but not overtight; the use of tools is 2.3 neither permitted nor necessary.

ADJUST LOAD (CUP)

$K-M-16019-Drink-Holder- $3$$

The maximum container size is 85 mm in diameter.
NOTE
Containers that are too small, excessively high, or unevenly shaped may be 3.2 somewhat unstable in the holder. If in doubt, we recommend a “dry” test
beforehand.
For glasses and cups with handles, it must be ensured that the handle can 3.3 be inserted into one of the three openings of the cylinder…
…now place the load carefully on the base of the bracket.

FAULT-FINDING (F) and REPAIR (R)

F: Bottle, mug, or cup wobbles or is at an angle:
F: B: Dimensions and shape of the load unsuitable
F: B: Check base d (insertion rail) for correct fit
F: B: Bring the inclined desktop to a horizontal position
F: B: Tighten clamping screw 2.3
F: Clamp of the holder slips on the desktop:
F: B: Tighten clamping screw 2.3
F: B: Check the desktop for dirt and moisture
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
16085-000-55 Rev.03 03-80-979-00 11/23

MAINTENANCE, CARE

During maintenance work, pay attention to possible hazards
(jamming, bumping)
For cleaning, use a slightly damp cloth and a non-abrasive
cleaning agent

TECHNICAL DATA

**** Material|

Cylinder, clamp: steel, powder-coated, black Connecting elements: steel, galvanized
Base (insertion rail): glass fiber reinforced plastic handle, pressure plate: PA

---|---
Load| Bottles, glasses, and cups up to a diameter of 85 mm
**** Dimensions|