HTW VP-50FD Pedestal Fan User Manual
- June 1, 2024
- HTW
Table of Contents
HTW-VP-50FD
Pedestal fan
User manual
Thank you
Please, read carefully this manual before using the product
PRODUCT OVERVIEW
- Body
- Tripod respectively
- Leg pipe
ASSEMBLY
ASSEMBLE THE STAND ONTO THE FAN BEFORE USE
Fig.1: Leg pipe and tripod connection.
- Rotate the three leg pipe (3) counterclockwise into the tripod respectively (2)
Fig.2: Attaching the motor housing (4) to the top of the column pipe (1)
-
First remove the pivot knob (2) and the bolt (6) from the top of the telescopic stand, then remove the neck retaining screw (3) and small adjustment knob (5) from the motor housing bracket.
-
Place the motor housing on the top of the stand and thread the large pivot bolt (6) through the bracket.
Screw in the small retaining screw (3) and tighten, but do not overtighten. -
Fit the large pivot knob (2) onto the end of the bolt (6) and the small adjustment knob (5) at the other side above the bolt. Tighten the knobs while holding the fan motor upright.
INSTRUCTIONS
The fan is equipped with 3 speeds and an oscillation option. To use the fan,
follow the simple instructions below.
Place the fan on a dry, level surface where it will not overturn during use.
Make sure the speed control on top of the motor housing is in the OFF [ 0 ]
position, then insert the power plug into an appropriate electrical outlet.
SPEED SELECTION
Select the fan speed. Simply move the speed control from the OFF [ 0 ] position to the desired setting.
- OFF
- LOW
- MEDIUM
- HIGH
OSCILLATION
- Press the oscillation knob on top of the motor housing to activate the oscillation function for widespread breeze distribution. The fan head will pivot from one side to the other.
- For stationary operation, pull up the knob to stop oscillation when the fan head is in the correct position.
ADJUSTING THE HEIGHT
- Loosen the height adjustment knob (3) (turn it anticlockwise), pull out or push down the extension pole to the desired height, then tighten the knob again firmly.
C. Can Cabanyes, 88
08403 Granollers
(Barcelona) – España
tel. +34 93 390 42 20
[email protected]
www.htwspain.com
España [email protected]
France [email protected]
Portugal [email protected]
Italy [email protected]
SAT
España [email protected]
France [email protected]
Portugal [email protected]
Italy [email protected]
tel. +34 933904220
tel. +33 465430168
tel. +39 05641715509
https://api.whatsapp.com/send?phone=+34631021917&text=[HTW-VP- 50FD]
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban
waste. It must be taken to a special local authority differentiated waste
collection centre or to a dealer providing this service. Disposing of a
household appliance separately avoids possible negative consequences for the
environment and health deriving from inappropriate disposal and enables the
constituent materials to be recovered to obtain significant savings in energy
and resources. As a reminder of the need to dispose of household appliances
separately, the product is marked with a crossed- out wheeled dustbin.