HTW VP-25YG Pedestal Fan User Manual

: June 1, 2024
: HTW

Table of Contents

HTW VP-25YG Pedestal Fan
Product Information
Product Usage Instructions
Cleaning and Maintenance
FAQ
GENERAL WARNING
INSTALLATION
ASSEMBLY
CONTROL PANEL
Technical Data
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HTW VP-25YG Pedestal Fan

Product Information

Specifications

Model: HTW-VP-25YG
Power Supply: 24V DC
Power: 25W

Product Usage Instructions

Assembly

Connect tube 1 to tube 2, aligning the small rib on tube 2 with the slot inside tube 1.
Insert tube 2 with tube 1 into the hole of the base and tighten it using the screw at the bottom of the base.
Insert the neck of the fan head into tube 1, aligning the small rib of the neck with the slot of tube 1.

Operation

Pressing the button will produce a buzzing sound.
Use only the provided special adapter with the fan.

Cleaning and Maintenance

Before cleaning, always unplug the fan from the socket.
Clean the body with a soft, damp cloth without using abrasive products.
Do not immerse any part in water. Ensure all electrical parts are dry before use.
Keep motor air holes free from dust and lint.
Store in original packaging when not in use for long periods.

FAQ

Q: What type of battery does the remote controller use?
A: The remote controller uses a CR2025-type battery. Make sure to remove the plastic protection from the battery before use.
Q: What should I do if I decide not to use the appliance anymore?
A: If you decide not to use the appliance anymore, we recommend making it inoperative by cutting the power cord (after disconnecting from the socket) and ensuring any dangerous parts are made harmless, especially if children might come into contact with them.

GENERAL WARNING

This device is intended for home use only, to ventilate rooms, and in the manner described in this manual: do not use it for any other purpose. Any other use is to be considered inappropriate and therefore dangerous.
The manufacturer cannot be held responsible for eventual damage caused by inappropriate, improper or irresponsible use and/or for repairs made to the product by unauthorized personnel.
This appliance is intended to be used in household and similar applications such as:
- staff kitchen in shops, offices and other working environments;
- farm houses
- by clients in hotels, motels and other residential-type environments
- bed and breakfast-type environments
Do not touch the appliance with wet hands or feet.
Do not insert any tool, or your fingers, into the grille protecting the blades.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
This appliance can be used by children aged 8 and older and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are properly supervised or if they have received instructions regarding the safe use of the appliance and have understood the related dangers. Children should not play with the appliance. Cleaning and maintenance should not be performed by children unless they are older than 8 years of age and are supervised.
The appliance must be kept out of children’s reach.
Attention: when using electric appliances, the basic safety precautions must always be observed to avoid risks of fire, electric shocks and physical injury.
Do not use the appliance if it is not operating correctly or seems damaged; if in doubt, contact professionally qualified personnel.
Make sure that the appliance is working correctly: if not, turn the appliance off and have it checked by professionally qualified personnel.
Always unplug the appliance before you assemble, disassemble or make adjustments to the appliance.
Do not move the appliance when it is operating.
Unplug the appliance when not in use.
Do not use the device at room temperatures above 40 °C.
Do not move the appliance when it is in function.
Do not leave the device exposed to the weather (sun, rain, etc.).
Do not pull on the cord to disconnect the plug from the socket.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard.

ASSEMBLE THE STAND ONTO THE FAN BEFORE USE

INSTALLATION

After removing the packing materials, check the integrity of the fan; if you are unsure, do not use it and ask for qualified professional help. The packing materials (plastic bags, polystyrene foam, nails, etc.) must be kept out of the reach of children because they are potential sources of danger.
Before connecting the appliance, check that the voltage values shown on the data plate correspond to those of the electricity supply network. In the event of incompatibility between the electric outlet and the plug of the fan, have the outlet replaced with another more suitable type by professionally qualified personnel, who will make sure that the section of the wires of the outlet is appropriate for the absorbed recommended; if their use is indispensable, they must conform to existing safety standards and their current capacity (amperes) must not be less than the maximum of the appliance.
The power socket must be easy to reach so the plug can be removed quickly in case of emergency.
To not place the appliance near sinks or other containers of liquids (minimum distance of 2 meters) to avoid the risk of it falling in.
Keep the fan far away from fabrics (curtains, etc.) or unstable materials that could obstruct the air intake grille; make sure that the front is free of unstable materials (dust, etc.).
Make sure that the electric cord is not touching rough, hot or moving surfaces and is not twisted or wrapped around the appliance.
Stand the appliance on a horizontal, flat surface or table; do not stand on an inclined plane (the appliance could upset).
In the event of a breakdown or poor operation, turn the fan off and ask for professionally qualified help.

Part name

HTW-VP-25YG-Pedestal-Fan-fig-1

ASSEMBLY

Firstly connect tube 1 to tube 2, make sure the small rib on tube 2 must align with the slot inside of tube 1, make sure the on position, then turn it anticlockwise to position.
Insert tube 2 with tube 1 into the hole of the base, then tighten it with the screw at the bottom of the base.
Insert the neck of the fan head into tube 1, make sure the small rib of the neck aligns to the slot of tube 1, make sure it the on position, then turn it anticlockwise to position.

OPERATION

CONTROL PANEL

The fan can be operated by the control panel located on the top of the fan or by a remote controller.

Plug the fan into the standard domestic socket through the fitted adapter, the fan will sound buzzing, room temperature will show on display.
Press the power button, the fan will start running at 1 speed.
Press the SPEED button to select the desired level from 1 to 6, the speed level is displayed on the LED screen with P1/P2/P3/P4/P5/P6/P7/P8.
Press the OSC button, to allow the fan to oscillate in the wind direction, to stop the oscillation, press the OSC button again.
Press the TIMER button to set the desired auto power-off time, the timer is from 1 to 12 hours, the interval is 1 hour.

Note1: When pressing the button each time, it will sound buzzing.
Warning: The fan is fitted with a special adapter, don’t use any other adapter unless approved by a qualified technical person.
Remote controller

Before using the remote controller, remove the plastic protection from the battery.
The remote controller battery is CR2025 type.

WARNNING: When not in use for long periods, the plug must always be removed from the socket.

Technical Data

Power supply: 24V DC
Power: 25W

CLEANING AND MAINTENANCE
Attention: before normal cleaning, remove the plug from the socket.

Clean the body with a soft, slightly damp, cloth; do not use abrasive or corrosive products.
Do not immerse any part of the fan in water or other liquid: if this should happen, do not put your hand in the liquid, but first remove the plug from the socket. Carefully dry the appliance and make sure that all the electrical parts are dry: in the case of doubt, ask for professionally qualified help.
It is essential that the motor’s air holes be kept from dust and lint.
If the fan will not be used for long periods, it must be protected from dust and humidity; we recommend storing it in its original packaging.
Should you decide not to use the appliance any more, we recommend making it inoperative by cutting the power cord (after making sure you have disconnected the plug from the socket) and making dangerous parts harmless if children are allowed to play with them.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2011/65/EU and amendment (EU)2015/863.
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority-differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-outwheeled dustbin.