HTW TAF1235GN Table Fan Owner’s Manual
- June 9, 2024
- HTW
Table of Contents
TAF1235GN Table Fan Owner’s Manual
Please, read carefully this manual before using the product.
To get the best out of your fan, please read these instructions carefully
before using it for the first time.
We also recommend that you keep the instructions for future reference, so that
you can remind yourself of the functions of the fan.
OVERVIEW OF FUNCTIONS
- Front fan grill
- Fan clips
- Fan blade
- Securing screw of fan blade
- Securing screw of rear fan grill
- Rear fan grill
- Handle
- Motor shaft
- Switch knob
- Oscillation button
- Motor
- Base
TECHNICAL DETAILS
Model: FT-30MC
Rated voltage: 220-240V~50Hz
Rated power: 35W
IMPORTANT SAFEY MEASURES
Please ensure that the voltage of the fan corresponds to the mains voltage.
- Use the fan only for the purpose(s) defined in the user guide.
- Never insert your fingers, pencils or other objects through the fan cage during operation.
- Switch the fan off before moving or cleaning.
- The fan should be set up on a stable and level surface to avoid it being knocked over.
- Do not expose the fan to excessive heat or humidity, as this can cause damage to the electrical components.
- Do not immerse in any form of liquid.
- It is not advisable to expose people, in particular babies and the elderly, to a continuous stream of cold air.
- The fan should be kept out of reach of children.
- Ensure that the cable does not get caught beneath the device, in drawers, behind shelves etc.
- Do not run the cable under carpets, rugs, etc.
- Ensure the cable is kept away form busy areas to avoid anyone tripping over it.
- Do not use if the device or cable becomes damaged. Take it to a specialist for repair.
- For indoors use only.
SETTING UP THE FAN
– STEP 1: Install the rear fan grill on the Motor housing!
Remove the 4pcs screws form the motor housing pain, and then put the rear fan
grill touch the motor housing pain, and then install the screws SEE THE
PICTURE-1.
STEP-2: Install the blade on the motor shaft and then, tight it by the “Securing screw of fan blade” SEE THE PICTURE-2.
STEP-3: Put the front fan grill onto the rear fan grill and tight the fan grill by the fan clips, and then install The “Securing screw of fan grills” SEE THE PICTURE-3.
USE
The fan has 3 speed settings:
- Fan is off
- Lowest speed
- Medium speed
- Top speed
The fan can operate in oscillating or stationary mode. Press the oscillation button to activate the oscillating mode.
CLEANING
- Always switch the fan off and unplug it before cleaning.
- Clean the parts using a damp cloth and a mild detergent, and ensure that all detergent residues is removed.
- Never use abrasive cleaning agents or solvents.
- Do not immerse in any form of liquid.
Warning: in order to reduce the risk of fire or electric shock, never use the appliance together with an electronic timer.
SAFETY PRECAUTIONS
- This appliance is not intended for use by persons (including children) with reduced physical,sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Have any repairs carried out solely by a qualified electrician. Never try to repair the appliance yourself.
Tel (0034) 93 390 42 20
Fax (0034) 93 390 42 05
[email protected] –
www.htwspain.com
FRANCE
[email protected]| PORTUGAL
[email protected]| ITA LY
[email protected]
---|---|---
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH
EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban
waste. It must be taken to a special local authority deifferentiated waste
collection centre or to a dealer providing this service. Disposing of a
household appliance separately avoids possible negative consequences for the
environment and health deriving from inappropriate disposal and enables the
constituent materials to be recovered to obtain significant savings in energy
and resources. As a reminder of the need to dispose of household appliances
separately, the product is marked with a crossed-outwheeled dustbin.