airties 4960XR Air Wi-Fi 6 Smart Mesh System User Manual

October 30, 2023
AirTies

airties 4960XR Air Wi-Fi 6 Smart Mesh System

airties-4960XR-Air-Wi-Fi-6-Smart-Mesh-System-PRODUCT-
IMG

PORTS and BUTTONS

airties-4960XR-Air-Wi-Fi-6-Smart-Mesh-System-FIG-1

  • Ethernet (Internet) cable from your Internet Service Provider or modem should be plugged into the WAN/LAN ethernet port of Air 4960R.
  • Please remove the protective plastic on the products before installation.

INSTALLATION

  • To install the Airties Wireless devices, please download the “Airties Vision” application on your mobile device by scanning this QR code.
  • Please follow the instructions in the mobile application to complete your setup.

TIPS FOR BEST PERFORMANCE

  • Keep devices away from:
  • Potential sources of electrical interference. Equipment that may potentially cause interference includes home security systems, microwaves, and consumer electronic devices.
  • Large metal surfaces and objects.
  • Sources and areas of heat such as ovens and sunrooms as well as direct sunlight.
  • Please make sure to remove the protective plastic on the device before first use.
  • Please use the device in an upright position. The openings are provided for ventilation, do not block or cover openings.
  • Your device is designed to work indoors and under room temperature conditions only.  Avoid placing the device in very cold,  very hot, very humid, or very dry locations inside your home.
  • To change advanced settings on your device, you can access web UI with the credentials below by typing http://masternode.local in the address field of your browser and pressing enter to display the login window:
  • Username: admin
  • Password: default Wi-Fi password on the label under your device.
  • Wi-Fi Name: XXXXXXXXXXXX Password: XXXXXXXXXX

RETURNING TO FACTORY SETTINGS

To return the device to factory settings, press down on the reset button (in the small opening on the back shown above) for 5 seconds and release. A metal paperclip (with an extended tip) or a strong toothpick are typically good choices for this task. When the reset process is triggered, the LED in the front will “blink rapidly” and the device will reboot to factory settings.

PRODUCT NOTICES

Operational modes

  • 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ax (HE20), 802.11ax (HE40)
  • 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80), 802.11ac (VHT160), 802.11ax (HE20), 802.11ax (HE40),
  • 802.11ax (HE80), 802.11ax (HE160)

TROUBLESHOOTING

Condition| LED Color| LED Behavior| Timing| Explanation| Recommended Action(s)
---|---|---|---|---|---


Power OFF

| ****

OFF

| ****

|  | ****

The device is turned off.

| Make sure the power button on the back is pressed and the  power supply unit is connected to the device.


Power ON, booting

| ****

White

| ****

Blinking

|  |  | No action is  required. If the device was just powered on, please wait for at least

2 minutes for the device to boot up.

Wireless network healthy| Green| Blinking| 5O milliseconds OFF 5 seconds ON| LED is steady green with a short blink every 5 seconds.| No action is  required.


The device configured as single

wireless access point

| ****

Green

| ****

Solid

|  | The device   is connected to the router/ gateway with an ethernet cable and acts as a wireless access point.

No other mesh devices are configured

in the network.

| ****

No action is  required, more mesh devices can be added to the wireless mesh network if needed.

Unconfigured mesh device| Blue| Blinking| 4 seconds OFF

4 seconds ON

| The device   is not configured and connected

to the wireless mesh network.

| Con gure the device using the  Airties Vision app.
Weak connection to the wireless mesh network| Red| Solid|  |  | Bring the  device closer to another device in the wireless mesh network.


No Internet

| ****

Red

| ****

Blinking

| 1/2 second OFF 1/2 second ON| ****

Your internet connection is down.

| Please check the  WAN/LAN ethernet cable connection between your modem and Air 4960R. If the issue persists, contact your Internet Service Provider.


Software upgrade

| ****

Blue

| ****

Blinking

| 1/2 second OFF 1/2 second ON| ****

The device   is retrieving the latest software.

| Wait for the upgrade to complete.   The device will automatically start with the latest software.

Documents / Resources

| airties 4960XR Air Wi-Fi 6 Smart Mesh System [pdf] User Manual
4960XR Air Wi-Fi 6 Smart Mesh System, 4960XR, Air Wi-Fi 6 Smart Mesh System, Smart Mesh System, Mesh System
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals