VEVOR JX50 Come Along Winch Instruction Manual

June 1, 2024
VEVOR

VEVOR JX50 Come Along Winch

VEVOR JX50 Come Along Winch

INSTRUCTION MANUAL

Technical Support and E-Warranty Certificate www.vevor.com/support
RATCHET POWER PULLER
MODEL: JX50

We continue to be committed to provide you tools with competitive price.

“Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

WARNING

1. Do not use the ratchet power puller when the vehicle is in gear or the “P” (parking brake) position. This may damage the vehicle’s transmission.
2. Before use, the cable should be straightened and not twisted to avoid breaking the rope.
3. Keep hands, clothing, hair, and jewelry clear of the cable/gear when using the ratchet power puller.
4. Do not wrap the cable around the load, and do not hook the load directly onto the cable. This could damage the load and twist or fray the cable.
5. Do not use the ratchet power puller if the cable is frayed, twisted, or damaged.
6. Do not allow anyone to stand near the cable/in the cable pulling line/behind the hand puller while it is on.
7. Never pass over the hand puller or steel cable during use.
8. Against the parameter table, do not overload fracture tension!
9. Never use other levers or tubes to put force on the tightener handle.
10. Subjecting the wire tightener to sudden shock-loading energy is prohibited.
11. It is prohibited to let the wire rope over/close to or around the corner sharp corner, which will cause the wire rope to be cut off.
12. The product is solely for pulling purposes on loads or pulling two cables together within the product’s technical specs.
13. The product is not intended for hauling floating vessels, nor not for professional and/or industrial applications.
14. Do not use the ratchet power puller for hoisting or lifting operations; for this type of application, the hoist must comply with particular safety requirements.
15. The ratchet power puller in this operation manual is not intended for transporting people.

MODEL AND PARAMETERS

Model JX50
Capacity 5T
Rope Type Wire Rope
Rope Diameter/Length Φ6.5mm/3.5m
Description 3 Hooks&Double Gear
Double Rope Span 1.9m
Single Rope Span 3.2m
Breaking Tension 5.58T

STRUCTURE DIAGRAM

STRUCTURE DIAGRAM

1. Handle
2. Pawl Spring Switch
3. Drive Pawl
4. Ratchet
5. Stop Pawl Trigger
6. Anchor Hook
7. Load Hook
8. Wire Rope
9. Guard

COMPONENTS

COMPONENTS

OPERATION

CHECK THE HAND PULLER CAREFULLY BEFORE USING IT !

Suggestion: The best way to get acquainted with how the hand puller operates is to carry out a few test runs before you actually use it.

Note: It may be difficult to pull out the rope if it is fully packed. Please reserve an appropriate length outside !

Step 1: Switch the pawl spring to the upper unlock position in order to release the pawl.

OPERATION

Step 2: Flip the handle to the opposite side, hold the trigger simultaneously, the wire rope can be pulled out.

Step 2

Step 3: Reset the handle, switch the pawl spring back to original position to lock the pawl.

Step 4 : The wire rope will be retracted when you push and pull the handle back and forth.

Step 3:

Note: In case of stacking the wire rope on one side, you may use your finger to guide the rope while retracting.

MAINTENANCE

1. Lubricate the wire rope regularly and check for wear and broken wire.
2. Be sure to wipe the product with a dry cloth after use in harsh environments, such as bad weather or by the sea.
3. Keep away from fire.

Specifications:

  • Model: JX50
  • Capacity: 5T
  • Rope Type: Wire Rope
  • Rope Diameter/Length: 6.5mm/3.5m
  • Description: 3 Hooks & Double Gear, Double Rope Span 1.9m, Single Rope Span 3.2m, Breaking Tension 5.58T

TechnicalSupport and E-Warranty Certificate
www.vevor.com/support


FAQ:

Q: How often should I lubricate the wire rope?

A: It is recommended to lubricate the wire rope regularly for smooth operation.

Q: Can I use the Ratchet Power Puller in extreme weather conditions?

A: It is advised to wipe the product with a dry cloth after use in harsh environments like bad weather to maintain its condition.

Q: What should I do if the wire rope gets stuck or tangled?

A: Guide the rope with your finger while retracting to prevent stacking or tangling.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

VEVOR User Manuals

Related Manuals