SW-MOTECH FRS.11.112.80400/S Repose-Pieds Evo Instruction Manual
- June 1, 2024
- SW-MOTECH
Table of Contents
SW-MOTECH FRS.11.112.80400/S Repose-Pieds Evo
EVO footrest kit
Thank you for choosing this premium product from SW-MOTECH. Please visit our
webshop for additional information, such as application charts and PDF
mounting instructions. Any other documents that may be required (e.g. ABE
certifications) are also available for download at our website.
Installation and/or maintenance of this product requires good technical understanding! For your safety, SW-MOTECH recommends having installation and/or servicing carried out by a specialist workshop! SW-MOTECH assumes no liability for damage caused by improper installation and/or maintenance work!
Carefully follow all the directions given in the mounting instructions and pay attention to all relevant information in the vehicle manual during assembly. Nonconformance can lead to vehicle damage or even endanger the driver! These mounting instructions are written based on our current state of knowledge.
Legal requirements for accuracy do not exist. This product was developed for vehicles in their factory setting. Compatibility with original accessory parts or other manufacturers’ accessory parts is not guaranteed. Furthermore, BEFORE installing this product, make sure that all moving parts (e.g. the chain] are in the original state of maintenance. Installed accessories can change the driving behaviour and/or stability of your vehicle.
GENERAL INFORMATION
Observe the country-specific regulations concerning vehicle
registration/operation as well as TUV regulations if applicable. If required,
register installed parts in the vehicle documents through an appropriate
inspection authority.
PREPARATION: Read the mounting instructions carefully and make sure that
all items on the parts list are included. Make sure that your vehicle is
parked safely and cannot fall over. Turn off the engine and remove the
ignition key. Let the motor/exhaust cool off if necessary. Disconnect the
vehicle battery when working on the electrical system. Use appropriate tools.
Have another person to help you.
MOUNTING: All parts and connections removed from the vehicle must be reinstalled by the vehicle manufacturer’s specifications or replaced by parts delivered by SW-MOTECH. Secure all threads, unless otherwise specified, with a medium-strength liquid thread locker. Torque specifications undefined by SW- MOTECH must be obtained from the vehicle manufacturer or by a specialist workshop!
FUNCTION CHECK: After installation make sure that all parts and connections previously removed are properly replaced. Also, make sure that no moving parts are obstructed and no function of the vehicle is hindered in any way. Cables and hoses must not rub and/or be pinched. Before starting to ride, perform a comprehensive check of all functions. After the first 50 km and then at regular intervals, check the tightening torque of all screw connections and the proper fit of the product.
PRODUCT SPECIFIC INFORMATION
ATTENTION
ground clearance can be reduced by this product! Special care should be taken
when cornering at extreme lean angles!
PARTS LIST
Coarse Thread
MOUNTING
NOTE: Schematic illustration; Appearance may vary.
NOTE : The installation is shown on the left side of the vehicle only.
Repeat the same procedure on the right side of the vehicle.
NOTE: Before removing the original footrest, make sure to note the order
and direction of the original fixing parts. Remove the original footrest.
Schematic illustration
Clean the footrest holder thoroughly. Apply some grease to the inside of the
footrest holder and the original pin (Orig.). Attach the hinged adapter (1]
with the shown original parts (Orig.) to the footrest mount.
ATTENTION: The bevelled surface of the hinge adapter (1) must be faced
upwards!
Insert the positioning cone (4) onto the star-shaped cone of the hinge adapter
(1). The height of the EVO footrest (5) can be adjusted individually by the
various mounting positions (see right detail drawing).
ATTENTION: Make sure to align the positioning cones (4) synchronous- ly
on each side! For orientation use the markings on the hinged adapter (1) and
the positioning cone (4) (see left detail drawing).
Insert the EVO footrest (5) onto the positioning cone (4). The inclination of
the angle of the EVO footrest (5) can be adjusted individually by the clothing
of the positioning cone (4) (not more than 18°; see right detail drawing).
ATTENTION: Make sure to align the EVO footrests (5) synchronously on each
side! For orientation use the markings on the positioning cone (4) (see left
detail drawing).
Attach the EVO footrest (5)
LOOSELY to the hinge adapter (1), as shown in the drawing. Check the
synchronous alignment once again and the ergonomics. Then attach the EVO
footrest (5) to the hinge adapter (1).
ATTENTION: Use a medium-strength liquid thread locker! Tighten the screw
as specified in the parts list.
NOTE: This step is optional. Attach the rubber pad (9) to the EVO footrest
(5), as shown in the drawing.
ATTENTION: Use a medium-strength liquid thread locker! Tighten the screw as
specified in the parts list.
MOUNTING INSTRUCTIONS
Thank you for choosing this premium product from SW-MOTECH. Please visit our webshop for additional information, such as application charts and PDF mounting instructions. Any other documents that may be required (e.g. ABE certifications) are also available for download at our website. Installation and/or maintenance of this product requires good technical understanding! For your safety, SW-MOTECH recommends having installation and/or servicing carried out by a specialist workshop! SW-MOTECH assumes no liability for damage caused by improper installation and/or maintenance work!
Carefully follow all the directions given in the mounting instructions and pay attention to all relevant information in the vehicle manual during assembly. Nonconformance can lead to vehicle damage or even endanger the driver! These mounting instructions are written based on our current state of knowledge. Legal requirements for accuracy do not exist. This product was developed for vehicles in their factory setting. Compatibility with original accessory parts or other manufacturers’ accessory parts is not guaranteed. Furthermore, BEFORE installing this product, make sure that all moving parts (e.g. the chain) are in the original state of maintenance. Installed accessories can change the driving behaviour and/or stability of your vehicle.
GENERAL INFORMATION
Observe the country-specific regulations concerning vehicle registration
/operation as well as TUV regulations if applicable. If required, register
installed parts in the vehicle documents through an appropriate inspection
authority. PREPARATION: Read the mounting instructions carefully and make
sure that all items on the parts list are included. Make sure that your
vehicle is parked safely and cannot fall over. Turn off the engine and remove
the ignition key. Let the motor/exhaust cool off if necessary. Disconnect the
vehicle battery when working on the electrical system. Use appropriate tools.
Have another person to help you.
MOUNTING : All parts and connections removed from the vehicle must be
reinstalled by the vehicle manufacturer’s specifications or replaced by parts
delivered by SW-MOTECH. Secure all threads, unless otherwise specified, with a
medium-strength liquid thread locker. Torque specifications undefined by SW-
MOTECH must be obtained from the vehicle manufacturer or by a specialist
workshop!
FUNCTION CHECK: After installation make sure that all parts and
connections previously removed are properly replaced. Also, make sure that no
moving parts are obstructed and no function of the vehicle is hindered in any
way. Cables
and hoses must not rub and/or be pinched. Before starting to ride, perform a
comprehensive check of all functions. After the first 50 km and then at
regular intervals, check the tightening torque of all screw connections and
the proper fit of the product.
PRODUCT SPECIFIC INFORMATION
ATTENTION: Pay attention to the mounting instructions included with the
EVO footrest kit!
PARTS LIST
ATTENTION: Pay attention to the mounting instructions included with the
EVO footrest kit!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>