HARING TECHNOLOGY V28 Stereo Bluetooth Headset User Guide

HARING TECHNOLOGY V28 Stereo Bluetooth Headset

Product Information

Specifications

• Model: [Insert Model Number]
• Compliance: Part 15 of FCC Rules
• Radiation Exposure Limits: FCC approved
• Minimum Distance from Body: 0cm

Product Usage Instructions

Safety Precautions

1. Do not make any changes or modifications to the device that are not explicitly approved by the manufacturer.
2. Ensure that the device is operated in compliance with FCC  regulations regarding harmful interference.
3. Maintain a minimum distance of 0cm between the device’s radiator and your body during installation and operation.

Installation

1. Place the device on a stable surface with proper ventilation to prevent overheating.
2. Connect the device to a power source using the provided cables.
3. Follow any additional installation guidelines provided in the user manual.

Operation

1. Power on the device using the designated power button.
2. Follow the on-screen instructions or refer to the user manual for specific operational details.
3. In case of any interference, ensure that the device continues to operate as intended.

Frequently Asked Questions (FAQ)

• Q: Can I modify the device to enhance its performance?
  A: No, any changes or modifications not approved by the manufacturer may void your warranty and authority to operate the equipment.

• Q: What should I do if I experience interference during operation?
  A: If you encounter interference, ensure that the device is placed in an appropriate location and follow the troubleshooting steps outlined in the user manual.

Stereo Bluetooth headset
User’s Guide

Note: Please use the original charge with the charge.the charging voltage can not be higher than 1 V!

Open the Bluetooth headset

• Power on:press and hold the multi-function button for red and blue lights flicker alternately;
• Power off: press and hold the multi-function button for about3s,until the red light goes out;
• Answer/end call:click on the multi-function key;
• Song/Pause:click on the multi-function key;
• Reject the call:long press multi-function button for about 2s; Voice dialling:long press multi-function key for about 2s;
• Previous song:long press the volume key+ about 2s; (Except for inaivicfual models)
• Next son_g:long press the volume button – about 2s; (Except for individual models)
• Prompt tone switch:click volume+,- at the same time (Except for individual models)
• Charging:red breathing light
• When full:long blue light
• Low battery voice alert low battery

Headset pairing

1. Press and hold the multi-function key for about 2s,at this time,the indicator lights flash red and blue, the headset goes into pairing
2. Turn on your phone Bluetooth function,search for the model name of the headphones.then click it will automatically connect.

Disconnect hte headset from the phone:
To disconnect the headset from the phone (For example,connect) your phone to another Bluetooth device),use one of the following: Turn off headphones:
In the case of matched cell phones before, it only takes 2 s to press the multi-function button for reuse, and a blue light flashes, and then a successful call back can be made.

Connect two phones
A drag two functions.the first pair of connected to the first mobile phone.and then turn off the headset new entry match,with second mobile phone connection pairing finished in the first one phone Bluetooth settings inside the click on the headset,the headset will also connect two mobile phone.

Headset charging
Headset built- in rechargeable battery,before using the headset for the first time.we recommend first the headset id fully charged,when charging.the indicator light is red,the battery is full when the red the color indicator will be converted to blue long.

Warranty card

Warranty period
This product the quality guarantee period of 12 months since product acquisition date.
Free services
Please pay attention to the use of high-quality charger of computer port charging.If you use cheap low-quality charger caused by the consequences at your own risk.

Product quality warranty card:

FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>