SW-MOTECH GPT.00.152.35500/B Rackpack-Set Aprilia Tuareg 660 (21-) Instruction Manual
- October 27, 2023
- SW-MOTECH
Table of Contents
SW-MOTECH GPT.00.152.35500/B Rackpack-Set Aprilia Tuareg 660 (21-)
MOUNTING INSTRUCTIONS
Art.-Nr. / Item No.: GPT.13.849.19000/B
ADVENTURE-RACK
hank you for choosing this premium product from SW-MOTECH. Please carefully
read and understand all instructions, safety messages and warnings in this
mounting instructions prior to installation and use of this product to avoid
injury.
This product was developed for vehicles in their factory setting.
Compatibility with original accessory parts or other manufacturers’ accessory
parts is not guaranteed. Visit our web shop for additional information, such
as application charts and PDF mounting instructions. Any other documents that
may be required (e.g. ABE certifications), are also available for download at
our web shop. Keep these mounting instructions as reference. SW-MOTECH assumes
no liability for damage caused by improper installation and/or maintenance
work!
SAFETY ALERT SYMBOL
This safety alert symbol is used throughout these mounting instructions to warn of the possibility of death, bodily injury or other warnings. The words DANGER, WARNING and CAUTION are used with this safety alert symbol to convey important safety messages and information related to the installation and use of this product. These words along with the safety alert symbol mean:
DANGER: Indicates a hazardous situation that, if not avoided, will result in death or serious injury!
WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury!
CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury!
NOTICE: Important information, but not death or injury related (property damage only)!
WARNING: The installation and/or maintenance of this product requires advanced mechanical skills, the proper tools, and a thorough understanding of tool use and torque specifications. For your own safety, SW-MOTECH recommends having installation and/or maintenance carried out by a qualified and certified motorcycle mechanic.
WARNING: Should you choose to self-install this product, carefully and
completely read all installation and safety instructions before installation
and use, and follow all the directions and safety precautions given in the
mounting instructions to avoid serious injury or death. Also pay attention to
all relevant information in the vehicle manual during installation and use. IF
YOU DO NOT UNDERSTAND ANY PART OF THESE INSTRUCTIONS, OR NEED CLARIFICATION
OF ANY INSTRUCTION, DO NOT ATTEMT TO MOUNT THIS PRODUCT WITHOUT CONTACTING SW-
MOTECH FOR ASSISTANCE.
PREPARATION: Read the mounting instructions carefully and make sure that
all items of the parts list are included.
CAUTION: Make sure that your vehicle is parked safely and cannot fall
over. Turn off the engine and remove the ignition key. Let the engine/exhaust
cool off if necessary. Disconnect the vehicle battery when working on the
electrical system. Use appropriate tools and wear always safety glasses and
hand protection. Have another person help you.
MOUNTING: All parts and connections removed from the vehicle must be
reinstalled in accordance with the vehicle manufacturer specifications or
replaced by parts and hardware delivered by SW-MOTECH.
WARNING: Secure all threads, unless otherwise specified, with medium
strong strength liquid thread locker. Torque specifications undefined by SW-
MOTECH must be obtained from the vehicle manufacturer or by a certified
motorcycle workshop!
FUNCTION CHECK: After installation also make sure that no moving parts
are obstructed, and function of the vehicle is not hindered in any way. Cables
and hoses must not rub and/or be pinched.
WARNING: Before starting to ride, perform a comprehensive check of all functions. After the first 50 km and then at regular intervals, check the tightening torque of all connections and the proper fit of the product. Installed accessories can change driving behavior/stability of the vehicle.
PARTS LIST
| Step | No. | Item No./ Description a | Part | Quantity b | N-mc |
|---|---|---|---|---|---|
| [1] | GPT.13.849.002L / R | Mounting Bracket | 2/2 | ||
| [2] | M6x35;DIN6912 | Hexagon Socket Screw, short head; black | 2/2 | 9 | |
| [3] | Ill 6,4; DIN 9021 | Washer; black | 2/2 | ||
| [4] | 0 20 / Ill 6,4 / h 8 | Spacer; black; height 8 mm | 2/2 | ||
| [5] | BB.180.090.062.090.060.01 | Flanged Spacer; black | 2/2 | ||
| [6] | M8x35;DIN6912 | Hexagon Socket Screw, short head; black | 2/2 | 20 | |
| [7] | Ill 8,4; DIN 9021 | Washer; black | 2/2 | ||
| [8] | 0 20 / Ill 8,4 / h 11 | Spacer; black; height 11 mm | 2/2 | ||
| [9] | 0 12 / Ill 8,4 / h 4 | Spacer; height 4 mm | 2/2 | ||
| [10] | GPT.13.849.001 | Mounting Bracket | 1 /1 | ||
| [11] | MB x 70; ISO 7380 | Lenshead Screw; black | 1 /1 | OEM | |
| [12] | 0 20/010,5/h 52 | Spacer; black; height 52 mm | 1 /1 | ||
| [13] | MB x 20; ISO 7380 | Lenshead Screw; black | 4 /4 | 20 | |
| [14] | MB; DIN 6927 | Lock Nut with Flange; black | 4 /4 | ||
| [15] | GPT.00.152.002 | Luggage Rack | 1 /1 | ||
| [16] | M6 x 16; ISO 7380 | Lenshead Screw; black | 4 /4 | 8 | |
| [17] | 0 6,4; DIN 522 | Washer; black | 4 /4 |
Note: a All measurements in millimeters. b The second number indicates the total quantity of the part in the delivery. c No torque specifications: Use the torque defined by vehicle manufacturer! The standard torque in this table can be used as long as it is within the vehicle manufacturer’s specifications.
MOUNTING
WARNING: Always wear eye and hand protection!
WARNING: Always use appropriate tools! Remove the shown screws on both sides
of the vehicle from the mounting points.
Attach the mounting brackets (1) on both sides to the vehicle.
WARNING: Use liquid thread locker! Do not fully tighten the screws yet.
Attach the mounting bracket [10) to the mounting brackets [1).
WARNING: Use liquid thread locker for screw I 11 )! Once all parts are
aligned without excess tension, tighten the screws as specified.
NOTICE: Depending on the available space, attach the luggage rack to the
marked mounting position [A] or [B], as shown in the detail drawing!
Attach the luggage rack [15) to the mounting bracket [1 0).
WARNING: Use liquid thread locker! Tighten the screws as specified.
NOTICE: In order to mount the luggage rack together with the SW-MOTECH
PRO side carrier or the SW-MOTECH SLC side carrier, use the screws [*] from
their sets.
Attach the mounting brackets [11 on both sides to the vehicle.
WARNING: Use liquid thread locker! Do not fully tighten the screws yet.
WARNING: The indicated maximum load is inclusive the weight of
topcase/luggage and adapter kit! The maximum vehicle load specified by the
manufacturer must not be exceeded!
NOTICE: Observe the country-specific regulations concerning vehicle
registration/operation as well as TOV regulations if applicable. If required,
register installed parts in the vehicle documents through an appropriate
inspection authority.
MOUNTING INSTRUCTIONS
Art.-Nr. / Item No.: GPT.00.152.35500/B
Extension for ADVENTURE-RACK
hank you for choosing this premium product from SW-MOTECH. Please visit our
web shop for additional information, such as application charts and PDF
mounting instructions. Any other documents that may be required (e.g. ABE
certifications), are also available for download at our web shop.
Installation and/or maintenance of this product require good technical
understanding! For your own safety SW-MOTECH recommends having installation
and/or servicing carried out by a specialist workshop! SW-MOTECH assumes no
liability for damage caused by improper installation and/or maintenance work!
Carefully follow all the directions given in the mounting instructions and pay
attention to all relevant information in the vehicle manual during assembly.
Nonconformance can lead to vehicle damage or even endanger the driver! These
mounting instructions are written based on our current state of knowledge.
Legal requirements for accuracy do not exist.
This product was developed for vehicles in their factory setting.
Compatibility with original accessory parts or other manufacturers’ accessory
parts is not guaranteed. Furthermore, BEFORE installing this product, make
sure that all moving parts (e.g. the chain) are in the original state of
maintenance. Installed accessories can change the driving behaviour and/or
stability of your vehicle.
GENERAL INFORMATION
Observe the country-specific regulations concerning vehicle registration/
operation as well as TUV regulations if applicable. If required, register
installed parts in the vehicle documents through an appropriate inspection
authority.
PREPARATION: Read the mounting instructions carefully and make sure that
all items of the parts list are included. Make sure that your vehicle is
parked safely and cannot fall over. Turn off the engine and remove the
ignition key. Let the motor/exhaust cool off if necessary. Disconnect the
vehicle battery when working on the electrical system. Use appropriate tools.
Have another person to help you.
MOUNTING: All parts and connections removed from the vehicle must be
reinstalled in accordance with the vehicle manufacturers· specifications or
replaced by parts delivered by SW-MOTECH. Secure all threads, unless otherwise
specified, with medium-strength liquid thread locker. Torque specifications
undefined by SW-MOTE CH must be obtained from the vehicle manufacturer or by a
specialist workshop!
FUNCTION CHECK: After installation make sure that all parts and
connections previously removed are properly replaced. Also make sure that no
moving parts are obstructed and no function of the vehicle is hindered in any
way. Cables and hoses must not rub and/or be pinched. Before starting to ride,
perform a comprehensive check of all functions. After the first 50 km and
then at regular intervals, check the tightening torque of all screw
connections and the proper fit of the product.
PARTS LIST
| Step | No. | Item No./ Description a | Part | Quantity b | N-mc |
|---|---|---|---|---|---|
| [1] | GPT.00.152.048 | Luggage Rack Extension | 1 /1 | ||
| [2] | M6 x 14; ISO 7380 | Lenshead Screw; black | 4 /4 | 9 | |
| [3] | M6; DIN 985 | Lock Nut | 4 /4 |
* All measurements in millimeters. ** The second number indicates
the total quantity of the part in the delivery.
*** No torque specifications: Use the torque defined by vehicle
manufactural’! The standard torque in this table can be used as long as it is
within the vehicle manufacturer’s specifications.
MOUNTING
ADVENTURE RACK
Attach the shown parts to your ADVENTURE RACK [sold separately].
ATTENTION: Use liquid thread locker! Tighten the screws as specified in
the parts list.
Adapter plate for STREET-RACK
Attach the shown parts to your adapter plate for STREET-RACK [sold
separately]. Tighten the screws as specified in the parts list.
Adapter plate for ALU-RACK
Attach the shown parts to your adapter plate for ALU-RACK (sold separately).
Tighten the screws as specified in the parts list.
MOUNTING INSTRUCTIONS
**Art.-Nr. / Item No.: BC.HTA.00.305.3000***
PRO Rack pack tail bag
Thank you for choosing this premium product from SW-MOTECH. Please visit our
web shop for additional information, such as application charts and PDF
mounting instructions. Any other documents that may be required (e.g. ABE
certifications), are also available for download at our web shop. Installation
and/or maintenance of this product require good technical understanding! For
your own safety SW-MOTECH recommends having installation and/or servicing
carried out by a specialist workshop! SW-MOTECH assumes no liability for
damage caused by improper installation and/or maintenance work!
Carefully follow all the directions given in the mounting instructions and pay
attention to all relevant information in the vehicle manual during assembly.
Nonconformance can lead to vehicle damage or even endanger the driver! These
mounting instructions are written based on our current state of knowledge.
Legal requirements for accuracy do not exist.
This product was developed for vehicles in their factory setting.
Compatibility with original accessory parts or other manufacturers” accessory
parts is not guaranteed. Furthermore, BEFORE installing this product, make
sure that all moving parts (e.g. the chain) are in the original state of
maintenance. Installed accessories can change the driving behaviour and/or
stability of your vehicle.
GENERAL INFORMATION
Observe the country-specific regulations concerning vehicle registration/
operation as well as TOV regulations if applicable. If required, register
installed parts in the vehicle documents through an appropriate inspection
authority.
PREPARATION: Read the mounting instructions carefully and make sure that
all items of the parts list are included. Make sure that your vehicle is
parked safely and cannot fall over. Turn off the engine and remove the
ignition key. Let the motor/exhaust cool off if necessary. Disconnect the
vehicle battery when working on the electrical system. Use appropriate tools.
Have another person to help you.
FUNCTION CHECK: This is a universal product. For this reason make sure
BEFORE the first use, that the product can be fixed properly and used without
problems with your vehicle type. After fixation also make sure that no moving
parts are obstructed and the function of the vehicle is not hindered in any
way. Lamps as taillight and turn signals must not be limited in their
function. Cables and hoses must not rub and/or be pinched. Before starting to
ride, perform a comprehensive check of all functions.
All components of the product must not contact any hot or moving parts of the
vehicle. All parts should also remain 5 cm away from hot parts of the vehicle
and remain clear of the exhaust stream. For this reason compress the
suspension fully several times with your vehicle stationary.
ATTENTION: Before riding and at each stop (every 200 km) check proper
fixation of the product!
PRODUCT SPECIFIC INFORMATION
ATTENTION: Riding with this product may affect the motorcycles driving
and braking performance! Cornering and ground clearance can be reduced by
using this product!
ATTENTION: Modifications will void any warranty.
ATTENTION: The maximum vehicle load specified by the manufacturer must not be exceeded!
ATTENTION
NOT FOR OFFROAD – USE
PARTS LIST
Step| No.| Item No./ Description a| Part| Anzahl b
Quantity b| N-mc
---|---|---|---|---|---
| [1]| | Tail Bag| 1/1|
[2]| BC.ZU B.00.122.30000| Waterproof lnnerbag| 1/1|
[3]| BC.ZU B.00.041.30000| Shoulder Strap| 1/1|
| [4]| BC.ZU B.00.128.30000| Loop Strap Set; 4 pieces| 1/1|
[5]| LSF.350.250| Protection Foil; 250 x 350 mm| 1/1|
| [6]| BC.ZU B.00.120.30000| Velcro Strap Set; loop side; 2 pieces| 1/1|
[7]| BC.ZUB.00.121.30000| Velcro Strap Set; hook side; 2 pieces| 1/1|
Note: a All measurements in millimeters. b The second number
indicates the total quantity of the part in the delivery. c No torque
specifications: Use the torque defined by vehicle manufacturer! The standard
torque in this table can be used as long as it is within the vehicle
manufacturer’s specifications.
FASTENING
FIXED ON THE LUGGAGE RACK EXTENSION
Step [1]: Loop two loop straps 14) together.
Step [2]: Guide the loop straps 14) through the shown openings of the
example luggage rack extension.
Step [3]: Hook the cam-hooks of the loop straps 14) onto the □ -rings of
the tail bag 11).
Step [4]: Pull the loop straps 14) on all four cam-hooks tight.
Step [5]: Roll up the excess lengths of the loop straps 14) …
Step [6]: … and fix it with the velcro straps.
FASTENING TO THE LUGGAGE RACK
Step [1]: Loop the velcro straps 16) and 17) onto the loop at the bottom
of the tail bag 11). Make sure that the loop and hook sides can be easily
attached. Place the tail bag 11 I on the luggage rack.
Step [2]: Fasten the tail bag 11 I to your luggage rack with the velcro
straps 16) and 171. Make sure that the tail bag 11 I is fastened in such a way
that it cannot slip while driving.
OPTIONAL: The velcro strap sewn on the front can be looped around the
backrest to provide additional support.
UNIVERSAL FASTENING:
Step [1] & [2]: Cover the contact surfaces of the tail bag [1) with the
protection foil [5). Clean the surface before applying the protection foil.
Step [3]: Place the tail bag [1) on the rear of the vehicle.
Step [4]: Entangle the loop straps [4) to FOUR suitable and loadable
fastening points to the vehicle, as shown in the example illustrations [Al to
[Cl [e.g. vehicles frame, footrest mounts, luggage hook etc.).
ATTENTION: The fastening points must be chosen so that the tail bag (1)
is secured against slipping! To do this, tension the tail bag (1) to the front
at the two front fastening points and to the rear at the two rear fastening
points!
Step [5]: Hook the cam-hooks of the FOUR loop straps 14] onto the D
-rings of the tail bag 11].
Step [6]: Pull the loop straps 14] on all four cam-hooks tight until the
tail bag 11 I is centered and securely fastened to the vehicle.
Step [7]: Roll up the excess lengths of the loop straps 14] …
Step [8]: … and fix it with the velcro straps.
ATTENTION: All components of the tail bag must not contact any hot or
moving parts of the vehicle. All parts should also remain 5 cm away from hot
parts of the vehicle and remain clear of the exhaust stream.
ALL FASTENING POSSIBILITIES
ATTENTION: Before riding and at each stop (every 200 km) check the proper
fixation of the tail bag (1] !
ATTENTION: Always use the included waterproof innerbag (2) to protect
your luggage from moisture!
Fasten the waterproof inner bag (2) to the velcro patch on the inside.
Additionally protect sensitive luggage (e.g., electronic equipment) from
moisture with a plastic bag.
LOADING: Never store pointy or sharp-edged objects, which could cause
injury to persons or damage to the vehicle/product! ONLY loop assigned SW-
MOTECH products to the MOLLE attachment!
CARE: For cleaning use ONLY a soft textile brush, cloth or sponge and
warm soapy water! Rinse with clean water.
Do NOT use strong cleaning agents, rough cleaning tools or high pressure
washer! Clean the product after riding in salty conditions, to avoid damage
from salt.
SW-MOTECH GmbH & Co. KG
Ernteweg 8/10
35282 Rauschenberg
Germany
Tel./ phone+ 49 (0)6425 / 8168 – 050
Fax/ fax+ 49 (0)6425 / 8168 – 10
[email protected]
www.sw-motech.com
Documents / Resources
| SW-
MOTECH GPT.00.152.35500/B Rackpack-Set Aprilia Tuareg 660
(21-)
[pdf] Instruction Manual
GPT.00.152.35500 B Rackpack-Set Aprilia Tuareg 660 21-, GPT.00.152.35500 B,
Rackpack-Set Aprilia Tuareg 660 21-, Aprilia Tuareg 660 21-, Tuareg 660 21-
---|---