Contour Design CDRMPROUS10213 Wireless Pro RollerMouse User Guide

Contour Design CDRMPROUS10213 Wireless Pro Roller

What’s in the Box

1. RollerMouse Pro
2. Wrist rest
3. Keyboard Risers
4. Dongle
5. USB extender
6. USB charging cable

User guide
www.conourdesign.com

Functions

A. Cursor speed
B. Power switch
C. Rollerbar
D. Copy
E. Paste
F. Left-click
G. Right-click
H. Scroll wheel
I. Double-click

Quick Start

1. Connect via Bluetooth
   Power on Roller Mouse Pro (button B). On your computer, navigate to the area of settings regarding Bluetooth connections. Select the option to add or discover a Bluetooth device. Your Roller Mouse Pro will automatically be recognized, select it for the computer to start Bluetooth connection.

2. Connect via USB dongle Insert USB dongle into available USB port and power on your Roller Mouse Pro. Your computer will recognize your new device and connect automatically.

3. Connect via a wired USB connection Connect the USB cable to your Roller Mouse and into an available USB port on your computer. Your computer will recognize your new device and connect automatically.

Cursor Speed (DPI)

Press the Cursor speed (button A) to cycle through cursor speeds. There are speed selections which range from slow (600 DPI) to fast (2800 DPI). Speed can be identified by the LED lights as shown. Hold Cursor speed (button A) for 8 seconds to default settings.

Battery level

Battery level is shown when the Roller Mouse Pro is powered on or plugged in.

If battery level is below 20%, a single light will flash to indicate the need to charge the device.

Roller bar click force adjustment

Click force refers to the level of resistance when clicking the Roller bar. To adjust click force, press and hold button A (Cursor speed) then press and release button C (Roller bar). Move button H (Scroll wheel) up and down to adjust the click force settings.

To disable the Roller bar click function, adjust the click tension until all LEDs are illuminated.

Roller bar click volume adjustment

The Roller bar has 6 different click volume settings. To change the click volume, press and hold button A (Cursor speed), while continuing to hold A (Cursor speed), press and release button H (Scroll wheel), the LED light will show current click vilume setting. Move button H (Scroll wheel) up/down to adjust volume setting. Release button A to confirm adjusted click volume.

To disable the Roller bar click volume, adjust the click volume until alle LEDs are illuminated.

Charging

To charge your Roller Mouse remove the USB extender and dongle from the charging cable. Plug the USB-C end into the Roller Mouse and connect to a USB-A at your computer.

Your Roller Mouse will be fully charged in approx. 5 hours. You may continue to use the Roller Mouse as it charges.

Wires less connection

Once powered on, the device is in automatic mode which will pair to the first available connection. The device will attempt to connect to the dongle first. If no connection is made, the device will attempt to connect via Bluetooth using the pairing information that is already in the unit. If no pairing information is available, it will start Bluetooth pairing mode and remain in that pairing mode for about two minutes.

If the device is left in automatic pairing mode, the Roller Mouse will cycle through the above steps each time it’s powered off and then powered back on again.

Pairing and secondary options

1.  Restart Bluetooth pairing:
   Press button A. While continuing to hold A, press and release button F two times, then release button A.

2. Select Bluetooth-only connectivity: Press button A. While continuing to hold A, press and release button F three times, then release button A.

3. Select dongle-only connectivity: Press button A, while continuing to hold A, press and release button G three times, then release button A.

4. Restore pairing with dongle: Unplug then re-plug the dongle to the unit to enable pairing. Hold the device close to dongle and press button A. While continuing to hold A, press and release button G two times, then release button A.

5. Reset wireless function to automatic pairing mode: Press button A. While continuing to hold A, press and release button F, then release button A.

When the device is plugged with the USB cable, this connection overrides wireless connectivity.

Please visit contourdesign.com/BT for further information about Bluetooth.

Keyboard risers

Before using your Roller Mouse Pro, please take a moment to adjust your keyboard.

If you are using other keyboards than Contour’s Balance Keyboard, you can use the Keyboard risers to achieve the desired keyboard height and angle. Simply place the Keyboard risers under your keyboards feet – as the keyboard was lying on the table.

For a proper ergonomic position the front edge of the the keyboard should be as close to the Roller bar as possible. We recommend to use negative tilt helping you to hold a neutral wrist position and decreasing the extension of your fingers.

• Negative tilt
  

• Neutral flat
  

• Neutral elevated
  

• Postive tilt
  

Software driver

All Contour’s ergonomic products are plug-and-play. If you want to customize your Roller Mouse Pro, we recommend to download the free driver available at:

contourdesign.com/drivers

Battery disposal

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help ****

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

IC Statement
This device complies with Industry Canada’s licenceexempt RSSs. Operation is subject to the following two conditions

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The term “IC:“ before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications.

Warranty
If there is a functional defect due to faulty manufacturing, we will replace the product. This warranty does not cover damage that results from misuse of the product.

Attention!
If you attempt to dismantle your “Roller Mouse Pro” you will invalidate your warranty

Customer Support

Contour Design Nordic A/S
Nyropsgade 41-43, 1. floor
DK-1602 Copenhagen V, Denmark
Phone: +45 70 27 02 27
Email: info@contourdesign.com
Contour Design, Inc.
10 Industrial Drive
Windham, New Hampshire 03087, USA
Phone: 603-893-4556
Email: ergoinfo@contourdesign.com
For more information please visit:
www.contourdesign.com
Tested to comply with FCC and IC standards.

Documents / Resources

| Contour Design CDRMPROUS10213 Wireless Pro RollerMouse [pdf] User Guide
CDRMPROUS10213, CDRMPROUS10113, CDRMPRO10310, CDRMPRO, CDRMPROUS10213 Wireless Pro RollerMouse, Wireless Pro RollerMouse, Pro RollerMouse, RollerMouse
---|---

References

• Bluetooth Quick Start And Support
• Drivers – Download Software for Contour Design Products
• Contour Design – Ergonomic mice, Superior design
• Contour Design – Ergonomic mice, Superior design
• Bluetooth Quick Start And Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>