VEVOR SS-TC-20 Frame Trailer Coupler Instruction Manual
- June 1, 2024
- VEVOR
Table of Contents
VEVOR SS-TC-20 Frame Trailer Coupler
INTRODUCTION
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
Technical Support and E-Warranty
Certificatewww.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
SAFETY INSTRUCTIONS
- Safety chains must be used.
- Be sure to take good protection during welding work.
- Be sure to check that the bolts are tight.
- Be sure to match the corresponding trailer ball.
- After towing for 50 miles, check coupler for tightness on ball. Always check tightness before towing. Be sure coupler handle is in locked position.
- Do not exceed the gross trailer weight capacity
MODEL AND PARAMETERS
| Model | SS-TC-20 |
|---|---|
| Capacity | 8000lbs |
| Ball Size | 2inch |
| Applicable Channel Diameter/Length | 2inch |
| Mounting Angle | 50° |
| Color | Black |
STRUCTURE DIAGRAM
- Handle Spring
- U-buckle
- Safety Pin
- Handle
- Large Rivet
- Jack Mounting Hole
- Ball Socket
COMPONENTS
No
| Picture| Name| Qty
---|---|---|---
1
| | Trailer Coupler| 1
3
| | User Manual| 1
OPERATION
Remove the safety pin.
To open, pull the coupler handle and rotate. Place coupler on ball. When ball
is completely nested in ball socket. Release the coupler handle until handle
is in locked position. Plug in the safety latch.
After towing for 50 miles, check coupler for tightness on ball. Always check
tightness before towing. Be sure coupler handle is in locked position.
Installation
MAINTENANCE
- Please check that the bolts are tight before each use.
- Do not overload.
- Pay attention to rust prevention.
Customer Support
MADE IN CHINA
Technical Support and E-Warranty Certificate
www.vevor.com/support
Documents / Resources
|
VEVOR SS-TC-20 Frame Trailer
Coupler
[pdf] Instruction Manual
SS-TC-20 Frame Trailer Coupler, SS-TC-20, Frame Trailer Coupler, Trailer
Coupler, Coupler
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>