VEVOR TR183636A3GW4C Kitchen Utility Cart Instruction Manual
- June 1, 2024
- VEVOR
Table of Contents
VEVOR TR183636A3GW4C Kitchen Utility Cart
Product Information
Specifications
- Model No.: TR183636A3GW4C, TR301832B3CW
- Static Load Bearing: Max. 661.38 Pounds (About 300 Kg)
- Dynamic Load Bearing: Max. 352.74 Pounds (About 160 Kg)
- PP Mat: PP Mat for Wire Shelf 2, PP Mat for Wire Basket 1
Product Usage Instructions
Assembly Precautions
- Assemble the product strictly following the instructions to avoid hazards.
- Wear safety goggles and work gloves during assembly.
- Avoid assembly when tired, or under the influence of alcohol, drugs, or medication.
- Product parameters apply to properly and completely assembled products only.
Use Precautions
-
The maximum load-bearing capacity is achieved by distributing
weights equally on shelves and baskets. -
Avoid placing all weights on the same layer.
-
Do not exceed the maximum load capacity for more than 1 hour.
FAQ
- Q: What is the maximum load capacity of the Grid Kitchen Cart?
- A: The static load-bearing capacity is max. 661.38 Pounds (About 300 Kg), and dynamic load-bearing capacity is max. 352.74 Pounds (About 160 Kg).
- Q: Can I exceed the maximum load capacity specified?
- A: It is not recommended to exceed the maximum load capacity for safety reasons. Please distribute weights evenly on shelves and baskets.
MODEL NO.: TR183636A3GW4C
MODEL NO.: TR301832B3CW
NEED HELP? CONTACT US!
- Have product questions? Need technical support?
- Please feel free to contact us: at CustomerService@vevor.com.
This is the original manual, please read all the instructions carefully before
operating. VEVOR reserves the right to interpret this user manual. The
appearance of the product shall be subject to the product you received.
Product technology or further software updates are subject to change without
notice.
Thank you for using this product. To make sure that you can operate the machine correctly, read this instruction carefully before operation and keep it properly for future reference. Please be sure to read the precautions and safety rules in this page to ensure your safe use.
PRODUCT PARAMETERS
Model NO.| Static load bearing| Dynamic load
bearing| PP Mat
---|---|---|---
TR183636A3GW4C
| Max. 661.38 Pounds
（About 300 Kg）
| Max. 352.74 Pounds
（About 160 Kg）
| PP Mat for Wire Shelf * 2
PP Mat for Wire Basket * 1
TR301832B3CW
| Max. 661.38 Pounds
（About 300 Kg）
| Max. 352.74 Pounds
（About 160 Kg）
| No
CAUTION
- The maximum load-bearing capacity is obtained by placing the weights equally on the top two wire shelves and the bottom wire basket !
- Do not place all the weights on the same layer!
- The placement time under the maximum load-bearing capacity shall not exceed 1 hour!
ASSEMBLY PRECAUTIONS
- Please assemble the product in strict accordance with the instructions. Incorrect assembly could be hazardous.
- Please wear safety goggles and work gloves properly during assembly.
- Do not try to assemble the product when feeling tired or when under the influence of alcohol, drugs or medication.
- Load bearing capacity and other product parameters are applied to the properly and completely assembled product only.
USE PRECAUTIONS
- This product is not a toy. Do not allow children to play with or get access to this item.
- Follow the intended uses only. Do not sit or stand on the cart.
- Check carefully before each use. Do not use it if parts get loosened or damaged.
- Use on flat, level, and hard surfaces only.
- Do not exceed the listed load-bearing capacity. Tighten all the knobs securely before placing weights on them. Be aware of the dynamic load-bearing capacity! Sudden load changes may temporarily cause excessive load, resulting in product failure.
ASSEMBLY INSTRUCTIONS
- For additional information regarding the parts listed below, please refer to the Assembly Diagram of this manual.
- Unwrap and separate all parts in a clear work area.
| NO. | A | B | C | D |
|---|---|---|---|---|
| Name | Wire Shelf | Wire Basket | Pole | Handle |
| Parts |
|
| |
Quantity| 2PCS| 1PC| 4PCS| 1PC
NO.| E| F| G| H| I
---|---|---|---|---|---
Name
|
Plastic Clip
|
Caster
|
Pole
| PP Mat for Wire Shelf| PP Mat for Wire Basket
Parts|
| |
|
|
Quantity| 28PCS| 4PCS| 6PCS| 2PCS| 1PC
ASSEMBLY STEPS
STEP 1
Screw the Casters (F) into the bottom of each Pole (C) by wrench.
Then snap a pair of Plastic Clips (E) on the same lower grooves of each pole.
Make sure the arrow of all plastic clips is pointed up, and the grooves of the
pole are covered by the convex line of the plastic clips.
STEP 2
Please make sure that you have the Wire Basket (B) correct way up.
Keep the collar gap of the basket downward. Then slide it from the top of each
pole down onto the plastic clips until there is a snug fit.
STEP 3
Set the cart upright. Refer to Steps 1 and 2 to snap plastic clips on the same
grooves of each pole at your desired position and assemble the first Wire
Shelf (A). Then snap plastic clips on the same grooves of two poles and slide
the Handle (D) down onto the plastic clips as shown in the figure below.
STEP 4
Refer to Step 3 to snap plastic clips on the top grooves of each pole and
assemble the remaining wire shelf.
STEP 5
Hang the 6-piece Hooks (G) onto the side of the top wire shelf frame as shown
in the figure below.
STEP 6 (Only for TR183636A3GW4C)
Put the PP Mat (I) onto the wire basket as shown in the figure below.
Similarly, place two pieces of PP Mats (H) on two wire shelves respectively.
STEP 7
Firmly push down the corners of each shelf and basket with a Rubber Mallet to
make all the shelves and baskets secure onto the plastic clips. Now the three-
tier utility cart is completely assembled.
MODEL NO.: TR183636A3GW4C
MODEL NO.: TR301832B3CW
CONTACT
- Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
- Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
- Imported to the USA: Sanven Technology Ltd.
- Address: Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
SHUNSHUN GmbH
- Römeräcker 9 Z2021, 76351
- Linkenheim-Hochstetten, Germany
Pooledas Group Ltd
- Unit 5 Albert Edward House, The Pavilions
- Preston, United Kingdom
- CustomerService@vevor.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>