Menuett 016855 Apple Peeler Instruction Manual
- June 3, 2024
- Menuett
Table of Contents
Menuett 016855 Apple Peeler
APPLE PEELER
OPERATING INSTRUCTIONS Important! Read the user instructions carefully before
use. Save them for future reference. (Translation of the original
instructions)
SAFETY INSTRUCTIONS
Read these instructions carefully before use. Failure to follow all the instructions and safety instructions can result in a risk of personal injury.
- Store out of the reach of children.
- Handle the product with care-risk of cut injury.
- Clean the product before using for the first time.
- Place the product on a level surface. .
SYMBOLS
Read the instruction5.
Approved for contact with food
TECHNICAL DATA
Size W31 x H 13 x D 11 cm
USE
-
Place the product on a level, open surface.
-
Lock the product in place with the lock lever.
-
Remove the cap on the end of the screw FIG. 1
-
Screw the handle on the end of the screw. FIG. 2
-
Press in the catch and pull the screw back as far as possible. FIG. 3
-
Press the thumbscrew on the peeler blade and bring down the peeler arm. Lock the peeler arm with the small catch. FIG.
-
Press the apple in place with the fastener in front of the holder. FIG. 5
-
Press the thumbscrew on the peeler blade and bring down the peeler arm. Lift up the lock lever to return the peeler arm to its original position. FIG. 6
-
Turn the handle dockwise to peel, core and slice the apple. The whole apple must pass the peeler blade. FIG. 7
-
Pull the apple from the core when it is completely peeled and sliced. FIG. 8
-
To remove the core, press the catch to release the screw. Pull the screw with the handle as far back as possible.
-
Pull the core from the holder. FIG. 9
WARNING! Keep your fingers and hands away from the peeler blade when using the product.
CHANGING THE SCREW
-
Press the catch to release the screw. Pull the screw with the handle as far back as possible. Hold the screw and unscrew the holder. FIG. 10
-
Unscrew the handle from the end of the screw and screw it on the new screw. Press the catch. Put the new screw with the handle in place. Screw the holder on the end of the screw. FIG. 11
MAINTENANCE
- Wash and dry the apple slicer after use.
- When necessary apply a drop of vegetable oil on the moving parts.
NOTE: Do not wash the apple slicer in a dishwasher.