SW-MOTECH ADV.07.783.76001 Kit Protection Adventure Instruction Manual
- June 1, 2024
- SW-MOTECH
Table of Contents
SW-MOTECH ADV.07.783.76001 Kit Protection Adventure
Product Information
Manufacturer: SW-MOTECH GmbH & Co. KG
Product Name: Mounting Instructions
Specifications
- Model Numbers: SBL.07.783.10001/B, SBL.07.788.10001/B, MSS.07.781.10001/B, MSS.07.781.10100/B, HPR.00.220.81201/B, HPR.00.220.20000/B, STP.07.176.10204/B, STP.07.176.10001/B
- Country of Origin: Germany
- Contact Information: SW-MOTECH GmbH & Co. KG, Ernteweg 8/10, 35282 Rauschenberg, Germany
- Email: info@sw-motech.com
- Website: www.sw-motech.com
Product Usage Instructions
- Ensure all parts listed in the item description are present.
- Follow the step-by-step mounting instructions provided in the manual.
- For any queries or assistance, contact SW-MOTECH GmbH & Co. KG.
FAQ
Q: What should I do if some parts are missing?
A: In case of missing parts, please contact SW-MOTECH GmbH & Co. KG for assistance and replacement.
Q: Can I mount the product without professional help?
A: It is recommended to follow the provided mounting instructions carefully. If unsure, seek professional assistance.
Q: Are there any specific tools required for installation?
A: The manual should list any tools required for installation. Ensure you have them before starting the process.
- SBL.07.783.10001/B
- SBL.07.788.10001/B
- MSS.07.781.10001/B
- MSS.07.781.10100/B
- HPR.00.220.81201/B
- HPR.00.220.20000/B
- STP.07.176.10204/B
- STP.07.176.10001/B
Mounting Instructions
Crash bar
- Thank you for choosing this premium product from SW-MOTECH.
- Please visit our webshop for additional information, such as application charts and PDF mounting instructions. Any other documents that may be required (e.g. ABE certifications), are also available for download at our webshop.
- Installation and / or maintenance of this product require good technical understanding! For your own safety SW-MOTECH recommends having installation and / or servicing carried out by a specialist workshop! SW-MOTECH assumes no liability for damage caused by improper installation and/ or maintenance work!
- Carefully follow all the directions given in the mounting instructions and pay attention to all relevant information in the vehicle manual during assembly. Nonconformance can lead to vehicle damage or even endanger the driver! These mounting instructions are written based on our current state of knowledge. Legal requirements for accuracy do not exist.
- This product was developed for vehicles in their factory setting. Compatibility with original accessory parts or other manufacturers’ accessory parts is not guaranteed. Furthermore, BEFORE installing this product, make sure that all moving parts (e.g. the chain) are in the original state of maintenance. Installed accessories can change the driving behaviour and / or stability of your vehicle.
GENERAL INFORMATION
- Observe the country-specific regulations concerning vehicle registration / operation as well as TOV regulations if applicable. If required, register installed parts in the vehicle documents through an appropriate inspection authority.
- PREPARATION: Read the mounting instructions carefully and make sure that all items of the parts list are included. Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the motor/ exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools. Have another person to help you.
- MOUNTING: All parts and connections removed from the vehicle must be reinstalled in accordance with the vehicle manufacturers’ specifications or replaced by parts delivered by SW-MOTECH. Secure all threads, unless otherwise specified, with medium-strength liquid thread locker. Torque specifications undefined by SW-MOTECH must be obtained from the vehicle manufacturer or by a specialist workshop!
- FUNCTION CHECK: After installation make sure that all parts and connections previously removed are properly replaced. Also make sure that no moving parts are obstructed and no function of the vehicle is hindered in any way. Cables and hoses must not rub and/ or be pinched. Before starting to ride, perform a comprehensive check of all functions. After the first 50 km and then at regular intervals, check the tightening torque of all screw connections and the proper fit of the product.
PRODUCT SPECIFIC INFORMATION
ATTENTION: While cornering at extrem lean angles, ground clearance can be
reduced by using this product!
Parts List
- Remove the original screws from the left mounting points.
- NOTE: The shown original spacer is not included in models from year of construction 2017.
- Attach the left crash bar 11 I, as shown in the drawing.
- ATTENTION: Use liquid thread locker!
- Do not fully tighten the screws yet.
- Attach the mounting bracket 191 to the frame of the vehicle, as shown in the drawing.
- After all parts are aligned without tension, fully tighten the screws 141, 161, 1101 and 1131 as specified in the parts list.
- ATTENTION: For vehicle models manufactured after 2014 use screw (16) and spacer (17) instead screws (10), as shown in the detail drawing!
- Remove the original screws from the right mounting points.
- NOTE: The shown original spacer is not included in models from year of construction 2017.
- Attach the right crash bar 118], as shown in the drawing.
- ATTENTION: Use liquid thread locker!
- Do not fully tighten the screws and nut yet.
- Attach the mounting bracket 127] to the frame of the vehicle, as shown in the drawing.
- After all parts are aligned without tension, fully tighten the nut 119] and the screws 1221. 1241. 128] and 131] as specified in the parts list.
- ATTENTION: For vehicle models manufactured after 2014 use screw (34) and spacer (35) instead screws (28), as shown in the detail drawing!
Upper crash bar
- Thank you for choosing this quality product from SW-MOTECH.
- Please visit our webshop for additional information, such as application charts and PDF mounting instructions. Any other documents that may be required (e.g. ABE certifications), are also available for download at our webshop. » www.sw-motech.com
- Installation and/or maintenance of this product requires good technical understanding. For your own safety SW-MOTECH recommends having installation and/or servicing carried out by a specialist workshop.
- SW-MOTECH assumes no liability for damage caused by improper installation and/or maintenance work.
- Carefully follow all the directions given in the mounting instructions. Also pay attention to all relevant information in the vehicle manual during assembly. Nonconformance can lead to vehicle damage or even endanger the driver! Please keep the mounting instructions as reference.
- This product was developed for vehicles in their original condition.
- Compatibility with original accessory parts or other manufacturers’ accessory parts is not guaranteed. Installed accessories can change the driving behaviour and/or stability of your vehicle.
GENERAL INFORMATION
- Please observe any country-specific regulations concerning vehicle registration or operation as well as TUV regulations where applicable. If required, register installed parts in the vehicle documents together with the appropriate inspection authority.
- PREPARATION: Read the mounting instructions carefully and make sure that all parts are included. Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the motor/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Make sure to use only the appropriate tools. During installation have another person help you.
- MOUNTING: All parts and connections removed from the vehicle must bereinstalled in accordance with the vehicle manufacturer specifications or replaced by parts and hardware delivered by SW-MOTECH. Secure all threads, unless otherwise specified, with medium-strong strength liquid thread locker. If not otherwise defined by the vehicle manufacturer or SW-MOTECH, screws and nuts must be tightened according to DIN/ISO specifications. After installation make sure that all parts and hardware previously removed are properly replaced.
- FUNCTION CHECK: After installation also make sure that no moving parts are obstructed and function of the vehicle is not hindered in any way. Cables and hoses must not rub and/or be pinched. Before starting to ride, perform a comprehensive check of all functions. Regularly check [every 100 km) for the proper seating of all parts and connections removed during installation.
PRODUCT SPECIFIC INFORMATION
ATTENTION: Using the same mounting points, upper crash bars are not compatible
with BMW’s additional LED high beams
Parts List
- Insert the screws (1) into the shown openings of the vehicle.
-
Atta ch! the threaded with the s crews 11 l spa ce rs (3) drawing.
-
ATTENTION· Use liquid thread locker
-
Do not ·fully tighte n the screws yet.
-
NOTE: The installation is shown on the left side of the vehicle only.
-
Repeat the same procedure on the right side of the vehicle with the appropriate parts.
-
Attach the upper crash bars (41 and (51 to the vehicle, as shown in the drawing. Attach the right crash bar (51 as same as the shown left crashbar (41.
-
ATTENTION: Use liquid thread locker!
-
ATTENTION: For vehicle models manufactured after 2014 use screws (11) instead screws (9)! After all parts are aligned without tension, fully tighten the screws as specified in the parts list.
- NOTE: The crossbar (6) is not needed with the SW-MOTECH HAWK Light Mount Set. Mount instead the crossbar of the Light Mount Set.
- If the SW-MO TECH crash bar is mounted, attach the upper crash bars as shown {left side shown].
Engine Guard
- Thank you for choosing this premium product from SW-MOTECH.
- Please visit our webshop for additional information, such as application charts and PDF mounting instructions. Any other documents that may be required (e.g. ABE certifications), are also available for download at our webshop. » www.sw-motech.com
- Installation and/or maintenance of this product require good technical understanding. For your own safety SW-MOTECH recommends having installation and/or servicing carried out by a specialist workshop. SW-MOTECH assumes no liability for damage caused by improper installation and/or maintenance work.
- Carefully follow all the directions given in the mounting instructions. Also pay attention to all relevant information in the vehicle manual during assembly. Nonconformance can lead to vehicle damage or even endanger
the driver! Please keep the mounting instructions as reference. This product was developed for vehicles in their original condition. Compatibility with original accessory parts or other manufacturers’ accessory parts is not guaranteed. Installed accessories can change driving behaviour and/or stability of your vehicle.
GENERAL INFORMATION
Please observe any country-specific regulations concerning vehicle
registration or operation as well as TUV regulations where applicable. If
required, register installed parts in the vehicle documents together with the
appropriate inspection authority.
- PREPARATION: Read the mounting instructions carefully and make sure that all parts are included. Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the motor/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Make sure to use only the appropriate tools. During installation have another person help you.
- MOUNTING: All parts and connections removed from the vehicle must be reinstalled in accordance with the vehicle manufacturer specifications or replaced by parts and hardware delivered by SW-MOTECH. Secure all threads, unless otherwise specified, with medium-strong strength liquid thread locker. If not otherwise defined by the vehicle manufacturer or SW-MOTECH, screws and nuts must be tightened according to DIN/ISO specifications. After installation make sure that all parts and hardware previously removed are properly replaced.
- FUNCTION CHECK: After installation also make sure that no moving parts are obstructed and function of the vehicle is not hindered in any way. Cables and hoses must not rub and/or be pinched. Before starting to ride, perform a comprehensive check of all functions. Regularly check [every 100 km) for the proper seating of all parts and connections removed during installation.
PRODUCT SPECIFIC INFORMATION
ATTENTION: While cornering at extrem lean angles, ground clearance can be
reduced by using this product!
PARTS LIST
-
Remove the original skid plate and mounting brackets as shown.
-
Remove the two original screws in front as shown.
-
Attach the mounting brackets (1 l and (2) with the original mounting-bracket-screws. At the front of the vehicle, replace the original screws with supplied screws (3) and spacers (4).
-
ATTENTION: Use liquid thread locker!
-
First tighten the original screws with the manufacturer’s specified torque.
-
Then tighten the screws (3) as specified in the parts list.
-
Stick the protective strips (6) on the inner sides of the upper frame clamps (51, as shown in the detail drawing.
-
ATTENTION: For assistance with this step an additional person is recommended! Insert the nut (11) in the upper frame clamp 15). IA small amount of grease will help hold the nut in position during assembly.I Place the upper frame clamp 151, with the nut 111), on the frame of the bike as shown (area behind the footrests).
-
First on left side, insert the screws 18), washers 19), together with the mounting bracket 17) and the lower frame clamp 1101. Loosely attach the mounting bracket 171 to the bike frame as shown on the left side. After the screws are loosely attached on the left side, attach the right side with the same process.
-
NOTE: A long Allen key with a ball end {as shown/ is recommended for this step.
-
ATTENTION: Use liquid thread locker (rear screws)! Do not fully tighten the screws yet.
-
Loosely attach the enginge guard (12) to the mounting brackets (1 ), (2) and (7).
-
ATTENTION: Use liquid thread locker! After all the parts are aligned without tension, fully tighten the screws at front, then the rear, as specified in the parts list.
-
NOTE: Only if necessary, use the extra washers /15/ between mounting bracket /1/ and engine guard /12/ to achieve the correct spacing.
-
Then tighten the screws at the middle, as specified in the parts list. Finally tighten the screws (8) as specified in the parts list.
-
NOTE: For this step we recommend using a small ratchet/torque wrench with a pivoting extension {similar to the drawing/.
Extension for engine guard
Thank you for choosing this premium product from SW-MOTECH.
Please carefully read and understand all instructions, safety messages and
warnings in this mounting instructions prior to installation and use of this
product to avoid injury
This product was developed for vehicles in their factory setting.
Compatibility with original accessory parts or other manufacturers’ accessory
parts is not guaranteed. Visit ourwebshop for additional information, such as
application charts and PDF mounting instructions. Any other documents that may
be required (e.g. ABE certifications), are also available for download at our
webshop. Keep these mounting instructions as reference. SW-MOTECH assumes no
liability for damage caused by improper installation and/or maintenance work
SAFETY ALERT SYMBOL
-
This safety alert symbol is used throughout these mounting instructions to warn of the possibility of death, bodily injury or other warnings. The words DANGER, WARNING and CAUTION are used with this safety alert symbol to
convey important safety messages and information related to the installation and use of this product. These words along with the safety alert symbol mean: -
DANGER: Indicates a hazardous situation that, if not avoided, will result in death or serious injury!
-
WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury!
-
CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury!
-
NOTICE: Important information, but not death or injury-related (property damage only)!
-
WARNING: The installation and/or maintenance of this product requires advanced mechanical skills, the proper tools, and a thorough understanding of tool use and torque specifications.
For your own safety, SW-MOTECH recommends having installation and/or maintenance carried out by a qualified and certified motorcycle mechanic. -
WARNING: Should you choose to self-install this product, carefully and completely read all installation and safety instructions before installation and use, and follow all the directions and safety precautions given in the mounting instructions to avoid serious injury or death. Also pay attention to all relevant information in the vehicle manual during installation and use.
-
IF YOU DO NOT UNDERSTAND ANY PART OF THESE INSTRUCTIONS OR NEED CLARIFICATION OF ANY INSTRUCTION, DO NOT ATTEMT TO MOUNT THIS PRODUCT WITHOUT CONTACTING SW-MOTECH FOR ASSISTANCE.
PREPARATION: Read the mounting instructions carefully and make sure that all items of the parts list are included. -
CAUTION: Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the engine/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools and wear always safety glasses and hand protection. Have another person help you.
-
MOUNTING: All parts and connections removed from the vehicle must be reinstalled in accordance with the vehicle manufacturer’s specifications or replaced by parts and hardware delivered by SW-MOTECH.
-
WARNING: Secure all threads, unless otherwise specified, with medium strong strength liquid thread locker. Torque specifications undefined by SW-MOTECH must be obtained from the vehicle manufacturer or by a certified motorcycle workshop!
-
FUNCTION CHECK: After installation also make sure that no moving parts are obstructed, and function of the vehicle is not hindered in any way. Cables and hoses must not rub and/or be pinched.
-
WARNING: Before starting to ride, perform a comprehensive check of all functions. After the first 50 km and then at regular intervals, check the tightening torque of all connections and the proper fit of the product. Installed accessories can change driving behavior/stability of the vehicle.
PARTS LIST • HEAD ANO SAVE THESE MOUNTING INSTRUCTIONS
-
WARNING: Always wear eye and hand protection!
-
WARNING: Always use appropriate tools!
-
Attach the mounting brackets 12) and 13) with the connecting bracket 11).
-
WARNING: Use liquid thread locker!
-
Do not fully tighten the screws yet.
-
NOTICE: The spacers (6) are not required with the SW-MOTECH engine guard MSS.07.781.1000*1•. Mount instead the front mounting plate and the spacers of the engine guard, as shown in the detail drawing.
-
Remove the original screws from the mounting points.
-
Attach the engine guard extension to the vehicle.
-
WARNING: Use liquid thread locker!
-
Tighten the screws as specified.
PRODUCT SPECIFIC INFORMATION
- WARNING: Ground clearance can be reduced by this product! Special care should be taken when cornering at extreme lean angles and/or riding on uneven surfaces (for example curbs and bumps)!
- WARNING: All motorcycle exhaust pipes have large geometric tolerances. Make sure to double-check all part clearances in the affected areas!
- NOTICE: Observe the country-specific regulations concerning vehicle registration/operation as well as TOV regulations if applicable. If required, register installed parts in the vehicle documents through an appropriate inspection authority.
Handguard Mounting Kit
- Thank you for choosing this premium product from SW-MOTECH.
- Please visit our webshop for additional information, such as application charts and PDF mounting instructions. Any other documents that may be required (e.g. ABE certifications), are also available for download at our webshop.
- Installation and/or maintenance of this product require good technical understanding! For your own safety SW-MOTECH recommends having installation and/or servicing carried out by a specialist workshop!
- SW-MOTECH assumes no liability for damage caused by improper installation and/or maintenance work!
- Carefully follow all the directions given in the mounting instructions and pay attention to all relevant information in the vehicle manual during assembly.
- Nonconformance can lead to vehicle damage or even endanger the driver!
- These mounting instructions are written based on our current state of knowledge. Legal requirements for accuracy do not exist.
- This product was developed for vehicles in their factory setting. Compatibility with original accessory parts or other manufacturers’ accessory parts is not guaranteed. Furthermore, BEFORE installing this product, make sure that all moving parts (e.g. the chain) are in the original state of maintenance. Installed accessories can change the driving behaviour and/or stability of your vehicle.
GENERAL INFORMATION
Observe the country-specific regulations concerning vehicle registration/
operation as well as TUV regulations if applicable. If required, register
installed parts in the vehicle documents through an appropriate inspection
authority.
PREPARATION: Read the mounting instructions carefully and make sure that all items of the parts list are included. Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the motor/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools. Have another person to help you.
MOUNTING: All parts and connections removed from the vehicle must be reinstalled in accordance with the vehicle manufacturers specifications or replaced by parts delivered by SW-MOTECH. Secure all threads, unless otherwise specified, with medium-strength liquid thread locker. Torque specifications undefined by SW-MOTECH must be obtained from the vehicle manufacturer or by a specialist workshop!
FUNCTION CHECK: After installation make sure that all parts and connections previously removed are properly replaced. Also make sure that no moving parts are obstructed and no function of the vehicle is hindered in any way. Cables and hoses must not rub and/or be pinched. Before starting to ride, perform acomprehensive check of all functions. After the first 50 km and then at regular intervals, check the tightening torque of all screw connections and the proper fit of the product.
PRODUCT SPECIFIC INFORMATION
After the installation check all operations of all handlebar controls,
specifically the throttle, front brake, kill switch and clutch, to ensure they
are operating correctly and are in accordance with the OEM specifications. Do
not ride the vehicle if any controls are not operating correctly. It may be
necessary to move the brake and clutch controls toward the handlebar end by a
few millimeters to achieve a correct fit.
Make sure the handlebar can fully turn in either direction. If parts of the
product makes contact with the tank at full steering lock, it may be necessary
to rotate the handlebar up (forward) slightly to allow adequate clearance.
Parts List
- NOTE: Installation on mounting points A is shown for the left side. Repeat for right side with applicable parts.
- Preparation: Make sure the handlebar ends are free. Remove the original handguards and flanged spa cars if mounted.
- Attach the backbones 1 & 2 with the original handlebar end weights to the handlebar ends
- ATTENTION, USE liquid thread Locker
- Do not fully tighten the screws yet
- NOTE: Installation on mounting points B is shown for the left side. Repeat for right side with applicable parts.
- Loosely assemble the clamp frames (5) and (6) to the handlebar. Attach the inner ends of the backbones to the clamp frames. Position the backbone in preferred position and tighten all screws in the following order: (3), (7), (9) & (8).
- ATTENTION: Use liquid thread locker!
- Tighten the screws as specified in the parts list.
KOBRA Handguard Shells
Mounting Instructions
ATTENTION: The assembly of this product can be complicated and requires a good
technical understanding. If you are not sure of how to do this, have a
specialty garage perform the mounting and service. SW-MOTECH accepts no
Liability for damages caused by improper installation.
ATTENTION: After the installation check all operations of all handlebar
controls, specifically the throttle, front brake, kill switch and clutch, to
ensure they are operating correctly and are in accordance with the OEM
specifications. Do not ride the motorcycle if any controls are not operating
correctly. Make sure the handlebar can fully turn in either direction. Check
periodically (50 km) that all bolts are tight.
Subject to change. Not responsible for typos.
NOTE: Installation is shown for the left side. Repeat for right side with
applicable parts. Attach the handguard shells (1) & (2) to the backbones
(befor mounting the backbones to the vehicle), as shown in the drawing.
ATTENTION: Tighten the screws carefully by hand (max. 2 Nm). Do not
overtighten the screws!
Slider set for front axle
- Thank you for choosing this premium product from SW-MOTECH.
- Please visit our webshop for additional information, such as application charts and PDF mounting instructions. Any other documents that may be required (e.g. ABE certifications), are also available for download at our webshop. Installation and/or maintenance of this product require good technical understanding! For your own safety SW-MOTECH recommends having installation and/or servicing carried out by a specialist workshop!
- SW-MOTECH assumes no liability for damage caused by improper installation and/or maintenance work!
- Carefully follow all the directions given in the mounting instructions and pay attention to all relevant information in the vehicle manual during assembly. Nonconformance can lead to vehicle damage or even endanger the driver! These mounting instructions are written based on our current state of knowledge. Legal requirements for accuracy do not exist.
- This product was developed for vehicles in their factory setting. Compatibility with original accessory parts or other manufacturers’ accessory parts is not guaranteed. Furthermore, BEFORE installing this product, make sure that all moving parts (e.g. the chain) are in the original state of maintenance. Installed accessories can change the driving behaviour and/or stability of your vehicle.
GENERAL INFORMATION
Observe the country-specific regulations concerning vehicle registration/ operation as well as TOV regulations if applicable. If required, register installed parts in the vehicle documents through an appropriate inspection authority.
PREPARATION: Read the mounting instructions carefully and make sure that all items of the parts list are included. Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the motor/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools. Have another person to help you.
MOUNTING: All parts and connections removed from the vehicle must be reinstalled in accordance with the vehicle manufacturers’ specifications or replaced by parts delivered by SW-MOTECH. Secure all threads, unless otherwise specified, with medium-strength liquid thread locker. Torque specifications undefined by SW-MOTECH must be obtained from the vehicle manufacturer or by a specialist workshop!
FUNCTION CHECK: After installation make sure that all parts and connections
previously removed are properly replaced. Also make sure that no moving parts
are obstructed and no function of the vehicle is hindered in any way. Cables
and hoses must not rub and/or be pinched. Before starting to ride, perform a
comprehensive check of all functions. After the first 50 km and then at
regular intervals, check the tightening torque of all screw connections and
the proper fit of the product.
PARTS LIST
-
Mount the axle bolt (1) to the axle (2), as shown.
-
ATTENTION: Use liquid thread locker! Tighten the axle bolt (1) by hand.
-
Remove the original axle bolt and insert the axle (2) though the front axis mount of your vehicle.
-
ATTENTION: Use liquid thread locker!
-
Tighten the axle bolt (1) as specified.
-
ATTENTION: In the case of dissasembly FIRST diassemble the slider on the right side of the vehicle, THEN on the left side!
-
FINALLY disassemble the axle bolt (1), otherwise the thread of the axle bolt can be damaged!
-
Mount the slider (3) with the shown parts on the left side to the axle bolt (1).
-
ATTENTION: Use liquid thread locker!
Tighten the screw as specified. -
Mount the slider (3) on the right side to the axis (2), as shown in the
-
ATTENTION: Use liquid thread locker!
Tighten the screw (6) as specified. -
Insert the cover caps (10) on both sides into the openings of the mounted sliders (3) and turn them to their end position.
-
ATTENTION: Make sure that the cover caps (10) fit firmly.
Slider set for rear axle
Thank you for choosing this premium product from SW-MOTECH.
Please carefully read and understand all instructions, safety messages and
warnings in this mounting instructions prior to installation and use of this
product to avoid injury.
This product was developed for vehicles in their factory setting.
Compatibility with original accessory parts or other manufacturers’ accessory
parts is not guaranteed. Visit our webshop for additional information, such as
application charts and PDF mounting instructions. Any other documents that may
be required (e.g. ABE certifications), are also available for download at our
webshop. Keep these mounting instructions as reference.
SW-MOTECH assumes no liability for damage caused by improper installation
and/or maintenance work!
SAFETY ALERT SYMBOL
- This safety alert symbol is used throughout these mounting instructions to warn of the possibility of death, bodily injury or other warnings. The words DANGER, WARNING and CAUTION are used with this safety alert symbol to convey important safety messages and information related to the installation and use of this product. These words along with the safety alert symbol mean:
- DANGER: Indicates a hazardous situation that, if not avoided, will result in death or serious injury!
- WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury!
- CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury!
- NOTICE: Important information, but not death or injury related (property damage only)!
- WARNING: The installation and/or maintenance of this product requires advanced mechanical skills, the proper tools, and a thorough understanding of tool use and torque specifications.
- For your own safety, SW-MOTECH recommends having installation and/or maintenance carried out by a qualified and certified motorcycle mechanic.
- WARNING: Should you choose to self-install this product, carefully and completely read all intallation and safety instructions before installation and use, and follow all the directions and safety precautions given in the mounting instructions to avoid serious injury or death. Also pay attention to all relevant information in the vehicle manual during intallation and use.
- IF YOU DO NOT UNDERSTAND ANY PART OF THESE INSTRUCTIONS, OR NEED CLARIFICATION OF ANY INSTRUCTION, DO NOT ATTEMT TO MOUNT THIS PRODUCT WITHOUT CONTACTING SW-MOTECH FOR ASSISTANCE. PREPARATION: Read the mounting instructions carefully and make sure that all items of the parts list are included.
- CAUTION: Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the engine/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools and wear always safety glasses and hand protection. Have another person help you.
- MOUNTING: All parts and connections removed from the vehicle must be reinstalled in accordance with the vehicle manufacturer specifications or replaced by parts and hardware delivered by SW-MOTECH.
- WARNING: Secure all threads, unless otherwise specified, with medium- strong strength liquid thread locker. Torque specifications undefined by SW-MOTECH must be obtained from the vehicle manufacturer or by a certified motorcycle workshop!
- FUNCTION CHECK: After installation also make sure that no moving parts are obstructed, and function of the vehicle is not hindered in any way. Cables and hoses must not rub and/or be pinched.
- WARNING: Before starting to ride, perform a comprehensive check of all functions. After the first 50 km and then at regular intervals, check the tightening torque of all connections and the proper fit of the product. Installed accessories can change driving behavior/stability of the vehicle.
PARTS LIST • READ AND SAVE THESE MOUN
- Remove the original cover cap from the mounting point on the swing arm.
- Screw the parts (1) to (7) loosely together, as shown in the detail drawing.
- WARNING: Use low strength Liquid thread locker!
- Mount the slider 1) with the shown parts to the swing arm.
- Tighten the screw (2) until the clamp spacers (6) and (7) are wedged enough to hold the slider (1) firmly in place.
- NOTICE: Tighten the screw (2) with a maximum of 9 Nm to avoid damaging the components.
- Insert the cover cap (8) into the opening of the mounted slider (1) and turn it to its end position.
- WARNING: Make sure that the cover cap (8) fits firmly.
PRODUCT SPECIFIC INFORMATION
registration piration as he as To regulations picate frequired, vesticle
installed parts in the vehicle documents through an appropriate inspection
authority.
SW-MOTECH GmbH & Co. KG
Ernteweg 7-10 35282 Rauschenberg Germany
Tel. / phone + 49 (0)6425 / 8168 – 050
Fax / fax + 49 (0)6425 / 8168 – 10
infol@sw-motech.com
www.sw-motech.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>