DORMAN 99367 Keyless Entry Remote Instructions
- June 1, 2024
- DORMAN
Table of Contents
DORMAN 99367 Keyless Entry Remote
Product Information
Specifications:
- Product Name: Keyless Entry Remote
- Model Number: 99367
- Compatibility: Universal
Product Usage Instructions
Setup Vehicle for Programming:
- Open the driver’s door.
- Without your foot on the brake pedal, press the start/stop button twice to the ON position.
- Turn Hazard light ON.
- Plug the programmer into the OBD II port located under the steering wheel.
- The programmer will beep twice.
- Press the start/stop button to the OFF position.
- The programmer will beep once.
Programming Remotes:
- Hold the remote in front of the start/stop button.
- Without your foot on the brake pedal, press the button once and continue to hold the remote in front of the start/stop button.
- The red car light in the instrument cluster will flash 5 times.
- Press the start/stop button to the OFF position.
To program additional remotes, repeat steps 8 through 10. All existing and new remotes for the vehicle must be programmed at this time.
Closing Out Programming:
- Without your foot on the brake pedal, press the start/stop button to the ON position.
- Press the start/stop button to the OFF position.
- The message in the instrument cluster should say Key Registration Complete.
- Test the functionality of each remote by starting the vehicle. If programming has failed, restart the instructions from the beginning.
NOTE: The programming tool will deactivate after 4 programming sessions.
FAQ
Still need help?
Please call our Technical Support team for assistance from our team of certified automotive experts.
- Contact: 1-800-523-2492
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part. If you do not have a service manual or lack the skill to install this part, it is recommended that you seek the services of a qualified technician. Pay special attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully. This product is only designed to function properly on specific vehicle applications. Please verify that the vehicle requirements match the product specifications and application notes for this part.
REMOVAL/INSTALL OF KEYLESS ENTRY REMOTE (99367) Nissan Altima 2016–13
GENERAL TECH TIP
- Rushing the procedure will require 30 second removal of negative battery cable!
- All remotes must be present at time of programming.
- One programmed remote required at time of programming.
- Programmer will expire after 5 attempts.
- Due to the programming process being sensitive to voltage drops, it is recommended that a battery charger is hooked up to the vehicle before beginning the programming process.
Programming Instructions
Setup Vehicle for Programming:
- STEP 1: Open driver’s door.
- STEP 2: Without your foot on the brake pedal, press the start/stop button twice to the ON position.
- STEP 3: Turn Hazard light ON.
- STEP 4: Plug programmer into OBD II port located under steering wheel.
- STEP 5: Programmer will beep twice.
- STEP 6: Press the start/stop button to the OFF position.
- STEP 7: The programmer will beep once.
Programming Remotes
- STEP 8: Hold the remote in front of the start/stop button. Without your foot on the brake pedal, press the button once and continue to hold the remote in front of the start/stop button
- STEP 9: The red car light in the instrument cluster will flash 5 times. STEP 10: Press the start/stop button to the OFF position.
- To program additional remotes, repeat steps 8 through 10.
All existing and new remotes for the vehicle must be programmed at this time.
Closing Out Programming:
- STEP 11: Without your foot on the brake pedal, press the start/stop button to the ON position.
- STEP 12: Press the start/stop button to the OFF position.
- STEP 13: Message in the instrument cluster should say “Key Registration Complete”.
- STEP 14: Test functionality of each remote by starting vehicle. If programming has failed, restart the instructions from the beginning.
- NOTE: The programming tool will deactivate after 4 programming sessions.
Contact
Still need help?
Please call our Technical Support team for assistance from our team of certified automotive experts. 1-800-523-2492
Disclaimer:
Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a qualified auto technician before attempting to perform any work you are not qualified to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Traffic Safety Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature. Dorman Products, Inc. | Corporate Office and Customer Service: 1-800-523-2492 ©2021 No reproduction in whole or in part without prior written approval.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>