DORMAN 934-401 Drive Shaft Center Support Bearing Instructions
- May 15, 2024
- DORMAN
Table of Contents
INSTRUCTION SHEET
Driveshaft Center Support Bearing
934-401 Drive Shaft Center Support Bearing
It is recommended to have all repairs to the drivetrain of your vehicle
conducted at a professional drivetrain repair shop.
NOTICE: Never clamp the driveshaft tubing with a vice. Using a vice to
clamp the driveshaft tubing may cause damage to the driveshaft. Only clamp on
the yoke ends.
IMPORTANT: In order to maintain proper balancing after installation, it
is recommended to index mark the positions of the driveshaft components
relative to the driveshaft tubes prior to disassembly.
Prior to installing the driveshaft, it is recommended to confirm the universal
joints can rotate freely without binding. After installation it is recommended
to check the balance of the driveshaft prior to operating the vehicle.
An improperly balanced driveshaft will lead to premature failure of the driveshaft center support bearing assembly; this will VOID the Dorman Limited Lifetime Warranty!
DORMAN LIMITED LIFETIME WARRANTY
At Dorman, we take pride in the quality of our products, and your satisfaction
with their performance. Thus, Dorman warrants its products to be free from
defects in material and workmanship under normal use and service. As your
exclusive remedy, Dorman will replace free of charge any Dorman product that
in Dorman’s reasonable determination does not comply with the foregoing
warranty. This warranty is voided by non-recommended use, improper
installation, or physical damage. In addition, Dorman will not be liable for
any incidental or consequential damages and your exclusive remedy shall be
replacement of the product that did not comply with this limited warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>