auna 10038329 Amplificatore stereo DAB HiFi Instruction Manual

auna 10038329 Amplificatore stereo DAB HiFi

Product Information

• Specifications:
  • Item Number: 10038329, 10038330
  • Power Supply: 230 V~ 50 Hz
  • Input Connectors: AUX IN, Coaxial Connection x2, Optical Connection, USB Connection (Type A)
  • Output Connectors: 4×2 Speaker Terminals, Line Out

Product Usage Instructions

• Setup:
  • Connect the system to a power source using the AC input 230V  ~ 50Hz.
  • Turn on the power using the power switch located on the device.
• Connecting to a CD Player:
  • Connect the CD player to the system following the CD player’s user manual for guidance.
• Setting Up Your Speaker System:
  • Place the speakers in suitable locations for optimal sound distribution.
  • Select the appropriate speakers for each zone based on your setup needs.
• Operation:
  • Bluetooth Pairing and Connection:
  • Follow the instructions in the manual to pair and connect your Bluetooth device to the system.
  • In DAB Mode:
  • Use the DAB mode to access digital radio stations and enjoy high-quality audio.
• Troubleshooting:
  • Issue: The display does not light up, and there is no audio output.
  • Solution: Ensure the power cable is securely plugged in.
  • Issue: The display is lit up, but no sound is produced.
  • Solution: Check the connections and audio settings to ensure proper output.
  • Issue: No sound from the centre speaker.
  • Solution: Verify the speaker connections and settings for balanced sound output.

FAQs

• Q: How can I access the latest user manual and product information?
  • A: Scan the QR code provided in the manual for easy access to the latest resources.

Dear Customer,

• Congratulations on purchasing this equipment.
• Please read this manual carefully and take care of the following hints to avoid damage.
• Any failure caused by ignoring the items and cautions mentioned in the instruction manual is not covered by our warranty and any liability.
• Scan the QR code to get access to the latest user manual and other information about the product.

TECHNICAL DATA

EXPLANATION OF THE WARNING SYMBOLS

SAFETY INSTRUCTIONS

Read these instructions. All uses guidelines must be read before using the device. Keep the instructions for future use.

Children over the age of 8 and persons with reduced physical, sensory or mental capabilities or those with a lack of experience and knowledge may only use the device if they are instructed on how to do so by a person responsible for their safety, or if they are supervised and understand the hazards associated with the use of the device.

• Use and security guidelines must be respected.
• The device must not be used near water or be put in contact with moisture.
• Make sure no liquid is spilled on the device and device openings.
• Move the device carefully, and avoid shocks.
• Do not block the breakdown of the device outputs.
• Do not place the device near from a heat source (e.g. radiator). Do not expose it to the Sun.
• Plug the device as indicated on this information form.
• This device has a connection with overload protection. Replacement should only be done bt an experienced technician or the device manufacturer.
• For cleaning the device, please follow the recommendations of the manual.
• The power cord should be unplugged when not using for a long period of time.
• The device shall be repaired by a qualified person when:
  • a. the power cord is damaged,
  • b. objects have fallen into the apparatus or a liquid has been spilled into device,
  • c. device was exposed to the rain,
  • d. the device does not work correctly without notable exterior change,
  • e. device is broken.
• The user shall not try to maintain the device beyond that which is described in this manual.
• The device must not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
• To completely disconnect the power input, the mains plug of apparatus must be disconnected from the mains, as the disconnect devices is the mains plug of apparatus.
• The mains plug of the apparatus should not be obstructed OR should be easily accessed during intended use.
• Excessive sound pressure from earphones and headphones can cause hearing loss.
• No naked flame sources such as lighted candles should be placed on the apparatus;
• Attention should be drawn to the environmental aspects of battery disposal;
• The device can be used in moderate climates.

PRODUCT DESCRIPTION

Front

1. STANDBY
2. To play fast backward or forward
3. PLAY/PAUSE: Press this key to play/pause music.
4. OPEN/CLOSE: Press this key to open or close the compartment door.
5. COMPARTMENT DOOR
6. LED DISPLAY
7. IR (Remote Sensor)
8. NEXT: Press this key to the next music.
9. PREVIOUS: Press this key to previous music.
10. PRE. VOL: To Adjust the CD Player volume.
11. USB Slot
12. MASTER VOLUME:

Rear

1. AC Input 230 V ~ 50 Hz
2. Power Switch
3. DAB ANTENNA
4. OPTICAL INPUT
5. COAXIAL2 INPUT
6. COAXIAL1 INPUT
7. AUX AUDIO INPUT JACK
8. LINE OUT AUDIO OUTPUT JACK
9. ZONE1: Speaker terminal (LEFT)
10. ZONE1: Speaker terminal (RIGHT)
11. ZONE2: Speaker terminal (LEFT)
12. ZONE2: Speaker terminal (RIGHT)
13. ZONE3: Speaker terminal (LEFT)
14. ZONE3: Speaker terminal (RIGHT)
15. ZONE4: Speaker terminal (LEFT)
16. ZONE4: Speaker terminal (RIGHT)

REMOTE CONTROL

For Amplifier For CD Player (Item 1003829/30)

1. SOURCE
2. ZONE1/ZONE2 VOLUME +/-
3. ZONE3/ZONE4 VOLUME +/-
4. TONE(BASS/TREBLE) +/-
5. OPEN
6. PREVIOUS/CHANNEL+ PREVIOUS
7. BACKWARD
8. NEXT/CHANNEL- NEXT
9. MUTE
10. VOLUME- VOLUME-
11. NUMBER BUTTONS NUMBER BUTTONS
12. VOLUME+ VOLUME+
13. REPEAT
14. PLAY/PAUSE/DAB SCAN PLAY/PAUSE
15. F.WARD
16. A-B
17. CD/USB
18. STANDBY STANDBY

PREPARATION

System connection

1. The speaker impedance should be correct (read, Speaker Choice”), or this unit or speakers could be damaged.
2. Do not let the bare speaker wires touch each other or any other metal parts as this could damage this unit or speakers.
3. Make sure the polarity of speaker wires is correct,+’to,+’, and,-‘ to,-‘, if these wires are incorrectly connected, the sound will be unnatural.

Connection to an amplifier

Source Equipment Connections Instructions

1. While connecting, you should switch off the power supply, and after finishing the connections, switch on the unit again.
2. All plus should be inserted firmly, or noise will be heard.

Connection to speakers

Set up Your Speaker System

• Five a speakers system, you can have a good sound field effect, the rear speakers provide widely diffused sound, center speaker use for dialogue environment.
• If using only main speakers and rear surround speakers, four speakers also can provide a live feeling.
• By using of center speaker, dialogue and vocal sounds are precisely localized.
• If you want to feel a low-frequency effect and a vibrant atmosphere, the subwoofer is essential.

Place of Speakers

• The central speaker in the central position should be upper or lower than the TV screen to avoid magnet influence or use magnet-proof speakers.
• The place of the subwoofer is not so critical because of low frequency without high directional.
• Rear surround speakers, which are behind your listening position should be nearly 2 meters up the floor

Speaker Choice

• The speaker should be powerful enough. Front speaker impedance should be
• 6 Ω – 16 Ω. Centre and surround speaker impedance all should be 6 Ω – 16 Ω.

OPERATION

1. Select the audio source by pressing the SOURCE key on the front panel or on the remote control, to display BT, USB, AUX, OPTI, COAX1, COAX2, and DAB.
2. Adjust the knob MASTER.VOL on the front panel or the key VOL+/- on the remote control to adjust the setting of the main volume control to your listening level.
3. Press the key ZONE on the front panel to select zone1, zone2, zone3, and zone4, and adjust MULTI on the front panel to set the zone volume. Press the key Z1/Z2 on the remote to select zone 1, and zone 2, and press +/- to Increase or decrease volume. Press the key Z3/Z4 on the remote to select zone1, zone2, and press +/- to Increase or decrease volume.
4. Press the key MENU on the front panel to select BASS, TREB, and adjust MULTI on the front panel to set the volume. Press the key TONE on the remote to select BASS, TREBLE, and press +/- to Increase or decrease volume.
5. Press the MUTE key on the remote control to mute, and press it again to reset.

BT Pair and Connect

1. Turn off any Bluetooth devices previously paired (Linked) with this unit.
2. Turn on the Bluetooth features on your phone or music player.
3. Turn on and set this unit to Bluetooth mode. The flashing blue Letter BT on the LED display indicates the unit in pairing mode.
4. Set your phone or music player to search for Bluetooth devices.
5. Select AMP-4000 DAB from search results on your phone or music player.
6. Select OK or YES to pair this unit with your phone or music player.
7. If protected, enter 0000 for passkey steady blue Light indicates a successful connection.

In DAB Mode

1. Press the BT/DAB button to select DAB radio mode
2. Press the DAB SCAN button, and “Scanning XXX%” will show on the display, and the number of DAB stations will show, and it will automatically play the first station.
3. Tune the PREV/NEXT key to choose the next or previous station.
   • Note: you may have to wait for the unit to tune in to the new channel.

TROUBLESHOOTING

control.
Sound from one channel only.| Speaker connections Input/Output connections Left/Right balance off.| Connect securely. Connect securely. Adjust balance control.
Sound channel no sound.| Speaker connections Surround channel volume set to minimum.| Connect securely. Adjust Surround channel volume control.
Instrument sound is reversed in stereo playback.| Incorrect speaker polarity. Incorrect input polarity.| Make sure that the + connections are connected and the – connections are connected.

DISPOSAL CONSIDERATIONS

• If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or the packaging indicates that this product must not be disposed of with household waste.
• Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment.
• By disposing of it per the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.
• For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
• This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste.
• Find out about local regulations for disposing of batteries.
• By disposing of them per the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.

DECLARATION OF CONFORMITY

• Manufacturer: Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
• Importer for Great Britain: Berlin Brands Group UK Limited
• PO Box 42
• 272 Kensington High Street
• London, W8 6ND
• United Kingdom
• Hereby, Chal-Tec GmbH declares that the radio equipment type Amp-4000 DAB complies with
• Directive 2014/53/EU. The full text of the EU Declaration of conformity is available at the following internet address: use.berlin/10038329
• For Great Britain: Hereby, Chal-Tec GmbH declares that the radio equipment type Amp-4000 DAB complies with the relevant statutory requirements.
• The full text of the declaration of conformity is available at the following internet address: use.berlin/10038329.
• www.auna-multimedia.com.

References

• e-back.de

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>