auna CD-1000 DG CD Player Instruction Manual

June 1, 2024
Auna

auna Logo CD-1000 DG
10038327 10038328

CD-1000 DG CD Player

Dear Customer,
Congratulations on purchasing this equipment.
Please read this manual carefully and take care of the following hints to avoid damages. Any failure caused by ignoring the items and cautions mentioned in the instruction manual are not covered by our warranty and any liability.
Scan the QR code to get access to the latest user manual and other information about the product.

auna CD-1000 DG CD Player - QR Cordhttps://use.berlin/10038327

CONTENTS
Technical Data 18
Safety Instructions 20
Product Description 22
Remote Control 24
Preparation 26
CD Player 27
Disposal Considerations 28
Manufacturer & Importer (UK) 28

TECHNICAL DATA

Item number 10038327, 10038328
Power supply 230 V~ 50 Hz
Input connectors USB Type A
Output connectors RCA audio out

Coaxial
Optical

EXPLANATION OF THE WARNING SYMBOLS

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN ****

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK AND SERIOUS PERSONAL INJURY, DO NOT REMOVE ANY COVER. NO USER-SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
WARNING. TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS PRODUCT TO WATER, RAIN OR MOISTURE.

| Triangle with lightning plus explanation as follows:
DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product‘s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
---|---
| Triangle with exclamation point plus explanation as follows:
ATTENTION: The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this product.
INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCK FAILED OR DEFEATED.
AVOID DIRECT EXPOSURE TO LASER BEAN.| Laser safety
This equipment uses an optical laser system in the CD mechanism, which is equipped with built-in safety devices. Do not attempt to disassemble the unit, but contact qualified service personnel. Exposure to this invisible laser beam may be harmful to the human eye.

THIS IS A CLASS 1 LASER PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS EXPOSURE OF THE LASER BEAM.

SAFETY INSTRUCTIONS

Read these instructions. All uses guidelines must be read before using the device. Keep the instructions for future use.

  • Children over the age of 8 and persons with reduced physical, sensory or mental capabilities or those with a lack of experience and knowledge may only use the device if they are instructed on how to do so by a person responsible for their safety, or if they are supervised and understand the hazards associated with the use of the device.

  • Use and security guidelines must be respected.

  • The device must not be used near water or be put in contact with moisture.

  • Make sure has no liquid is spilled on device and device openings.

  • Move device carefully, avoid shocks.

  • Do not block the breakdown of the device outputs.

  • Do not place the device near from a heat source (e.g. radiator). Do not expose it to the Sun.

  • Plug the device as indicate on this information form.

  • This device has a connection with overload protection. Replacement should only be done bt an experienced technician or the device manufacturer.

  • For cleaning the device, please follow the recommendations of the manual.

  • The power cord should be unplugged when not using for a long period of time.

  • The device shall be repaired by a qualified person when:
    a. the power cord is damaged,
    b. objects have fallen into the apparatus or a liquid has been spilled into device,
    c. device was exposed to the rain,
    d. device does not work correctly without notable exterior change,
    e. device is broken.

  • The user shall not try to maintain the device beyond that which is described in this manual.

  • The device must not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.

  • To be completely disconnect the power input, the mains plug of apparatus must be disconnected from the mains, as the disconnect devices is the mains plug of apparatus.

  • The mains plug of apparatus should not be obstructed OR should be easily accessed during intended use.

  • Excessive sound pressure form earphones and headphones can cause hearing loss.

  • No naked flame sources such as lighted candles should be placed on the apparatus;

  • Attention should be drawn to the environmental aspects of battery disposal;

  • The device can be used in moderate climates.

PRODUCT DESCRIPTION

Front

  1. auna CD-1000 DG CD Player - Front STANDBY
  2. To play fast backward or forward
  3. PLAY/PAUSE:Press this key to play/pause music.
  4. OPEN/CLOSE: Press this key to open or close the compartment door.
  5. COMPARTMENT DOOR
  6. LED DISPLAY
  7. IR (Remote Sensor)
  8. NEXT: Press this key to next track
  9. PREVIOUS: Press this key to previous track
  10. PRE. VOL: To Adjust the CD Player volume.
  11. USB Slot

Rear

  1. auna CD-1000 DG CD Player - Rear UDIO OUTPUT JACK
  2. COAXIAL OUTPUT
  3. OPTICAL OUTPUT
  4. Power Switch
  5. AC Input 230V ~ 50Hz

REMOTE CONTROL

auna CD-1000 DG CD Player - REMOTE CONTROL

For Amplifier (Item 1003829/30) For CD Player
1 SOURCE
2 ZONE1/ZONE2 VOLUME +/
3 ZONE3/ZONE4 VOLUME +/
4 TONE(BASS/TREBLE) +/
5  OPEN
6 PREVIOUS/CHANNEL+ PREVIOUS
7  BACKWARD
8 NEXT/CHANNEL-  NEXT
9 MUTE
10 VOLUME-  VOLUMENUMBER
11 NUMBER BUTTONS BUTTONS
12 VOLUME+ VOLUME+
13 REPEAT
14 PLAY/PAUSE/DAB SCAN PLAY/PAUSE
15 F.WARD
16 A-B
17 CD/USB
18 STANDBY STANDBY

PREPARATION

System connection

  1. The speaker impedance should be correct (read ,,Speaker Choice”),or this unit or speakers could be damaged.
  2. Do not let the bare speaker wires touch each other or any other metal parts as this could damage this unit or speakers.
  3. Make sure the polarity of speaker wires is correct, ,+’to ,+’ , and ,-‘to ,-‘, if these wires arencorrectly connected, the sound will be unnatural .

Connection to an amplifier

auna CD-1000 DG CD Player - amplifier

CD PLAYER

Loading and Playing CD Disc
Open the CD door. Install a disc with the CD graphic side facing up. Close the CD door. Press the SOURCE button to CD mode. After reading the total number of tracks will be shown on the display. Press the ⏯ button to play.
Play/Pause Control
To pause playback press the ⏯ button. Press the button again to resume playback.
Skip Track
During playback press the ⏮ or ⏭ button to search to the previous or next track.
Repeat mode
Pressing the REPEAT button a number of times will switch through the various play modes.

Press Play Mode
1 x Repeat all tracks
2 x Repeat

Repetition of a section
Press the A-B button to set the section start.
Press the A-B button again to set the end of the section..

DISPOSAL CONSIDERATIONS

**** If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and  electronic equipment. By disposing of it in accordancewith the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries.
By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.

DECLARATION OF CONFORMITY

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Berlin Brands Group UK Limited
PO Box 42
272 Kensington High Street
London, W8 6ND
United Kingdom
Hereby, Chal-Tec GmbH declares that the radio equipment type CD-100 DG is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet
address: use.berlin/10038327
For Great Britain: Hereby, Chal-Tec GmbH declares that the radio equipment type CD-100 DG is in compliance with the relevant statutory requirements. The full text of the declaration of conformity is available at the following internet address: use.berlin/10038327

auna Logowww.auna-multimedia.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals