auna MM-5.1-J 5.1 Home Theater Active Speaker System Instruction Manual
- May 15, 2024
- Auna
Table of Contents
auna MM-5.1-J 5.1 Home Theater Active Speaker System
Dear Customer,
Congratulations on purchasing this equipment. Please read this manual
carefully and take care of the following hints to avoid damages. Any failure
caused by ignoring the items and cautions mentioned in the instruction manual
are not covered by our warranty and any liability. Scan the QR code to get
access to the latest user manual and other information about the product.
SPECIFICATIONS
Item number 10000147 10022256
- Power supply 110-240 V~ 50/60 Hz
- Drive units1 x 5,25″ 5 x 3″
- RMS power 95 W
- Frequency response 40 Hz–20 kHz
- S/N ratio ≥ 70 dB
BT specifications
- Frequency band 2402–2480 MHz
- Maximum radio-frequency power 2 dBm
Included
- 1 x Subwoofer
- 2 x Speakers
- 1 x 3.5 mm mini-jack to stereo RCA cable
- 1 x English user manual (other language: German)
SAFETY INSTRUCTIONS
- Read this Instruction Manual before you attempt to connect or operate the appliance.
- Keep these instructions in good condition. Heed all warnings. Follow all instructions.
- Save this Instruction Manual for future reference.
- The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the product. Dry location use only.
- No naked flame source, such as candles, should be placed on the product.
- Children should be supervised to ensure that they do not play with the appliance.
- Ventilation should not be impeded by covering the ventilation openings.
- Ensure that the unit is plugged into an AC 100-240V 50/60Hz power outlet. Using higher voltage may cause the unit to malfunction or even fire catching. Turn off the unit before unplugging it from power source to completely switch it off.
- Do not plug/unplug the power plug into/from an electrical outlet with wet hands.
- If the power plug does not fit into your outlet, do not force the plug into an electrical socket if it does not fit.
- Use replacement parts, which are specified by the manufacturer.
- Install the unit in accordance with the manufacturer’s instructions.
- Place the unit where there is good ventilation. Place the system on a flat, hard and stable surface. Do not expose to temperatures above 40 °C. Allow at least 30 cm clearance from the rear and the top of the unit and 5 cm from each side.
- Press the buttons of the unit gently. Pressing them too hard can damage the unit.
- Dispose of used batteries in an environmental-responsible manner.
- Always ensure that the product is unplugged from the electrical outlet before moving or cleaning. Clean it with dry cloth only.
- Unplug the product during lightning, storms or when it will not be used for long periods of time.
- This product has no user-serviceable parts. Do not attempt to repair this product yourself. Only qualified service personnel should perform servicing. Take the product to the electronics repair shop of your choice for inspection and repair.
- NEVER let anyone, especially children, push anything into holes, slots or any other openings in the unit’s casing as this could result in a fatal electric shock.
- Don’t mount this product on a wall or ceiling.
- Do not place the unit near TVs, speakers and other objects that generate strong magnetic fields.
- Do not leave the unit unattended when it is in use.
- To disconnect the system completely if it not to be used for a long time, remove the AC power plug from the wall outlet.
SYSTEM CONNECTION DIAGRAMS
Speaker terminals
Connect front speakers, a centre speaker. surround speakers to 5.1 speaker output terminals.
- The front speaker cords to the FRONT SPEAKERS terminals
- The centre speaker cords to the CENTER SPEAKERS terminals
- The surround speaker cords to the SURROUND SPEAKER terminals.
Note : Do not leave objects generating magnetism near the speakers.
Connecting equipment
Jacks and plugs of the connecting cord are color-coded as follows:
Right channel: red jacks and plugs Left channel: white jacks and plugs
- Insert the plugs fully into the jacks. Loose connections may produce a humming sound or other noise interference.
- Connect the speakers and all other external equipment and finally connect the AC power cord.
POSITIONING OF THE SPEAKERS
-
Sub-woofer
Place the sub-woofer any place on the floor.
(There is no directional requirement for the Bass effect.) -
Front Speakers
-
Surround Speakers
Place the surround speakers directly to the side of a slightly behing the listening area.
Align them horizontally,about 1 meter above ear height. -
Centre Speaker
Position in the centre of the two front speakers in addition.
Position on or below the TV set. If connecting a TV set to the unit.
CONTROLS
Front panel
ST.BY/⏯ | USB/SD Pause/Play function key |
---|---|
INPUT | Input function key |
5.1/2.1 | 5.1/2.1 channel-switching key |
VOL-/⏮ | Volume function (keep pressing it for more than 3 seconds) Previous |
song during USB/SD input.
VOL+/⏭| Volume+ function (keep pressing it for more than 3 seconds) Next song
during USB/SD input.
SD/MMC CARD| SD card socket
U DISK| USB socket
When using SD card function, it is required to choose an SD card whose memory is larger than 512M and also is a compatible edition.
| Power switch button(standby) switch.
---|---
SD| SD Input
5.1 /2.1| 5.1/2.1 channel switch
USB| USB Disk
BT| BT mode
AUX| AUX Input
DVD| DVD Input
⏯| Play & pause
⏮| Previous song when USB/SD Input;
⏭| Next song when USB/SD Input;
SLEEP-/+| to Time on/off the speaker
FL-/+| FL volume setting
FR-/+| FR volume setting
SW-/+| SW volume setting
CEN-/+| CEN volume setting
VOL +/-| Master volume
SL-/+| SL volume setting
SR-/+| SR volume setting
0-9| Press any key to choose the song
REPEAT| Repeat
RESET| When the volume is at the maximum, press RESET button at the status
while power on.
EQ-/+| Equalizer (during USB/SD input )
DISP-/+| Brightness adjust
OPERATION
Power supply
- Connect the subwoofer to a 230 V power source.
- Switch on the subwoofer by pressing the “Power” button.
- If you have connected a 5.1 source, press the 5.1 AUX button. You can choose between 2.1 and 5.1 sound.
- Use the Menu key to select the different speakers.
- With Vol+ and Vol- you can adjust the volume of the different speakers.
- Steps 2-5 can also be performed using the supplied remote control.
How to use the BT
- Select the audio input to BT status.
- Search BT device with name “MM51”
- Connect the BT
- If your BT device below 2.0 version, input password “0000” when connecting.
DISPOSAL CONSIDERATIONS
If there is a legal regulation for the disposal of electrical and
electronic devices in your country, this symbol on the product or on the
packaging indicates that this product must not be disposed of with household
waste. Instead, it must be taken to a collection point for the recycling of
electrical and electronic equipment. By disposing of it in accordance with the
rules, you are protecting the environment and the health of your fellow human
beings from negative consequences. For information about the recycling and
disposal of this product, please contact your local authority or your
household waste disposal service.
This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.
DECLARATION OF CONFORMITY
Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Berlin Brands Group UK Limited
PO Box 42
272 Kensington High Street
London, W8 6ND
United Kingdom
Hereby, Chal-Tec GmbH declares that the radio equipment type MM-5.1-JW is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address: use.
berlin/10022256
For Great Britain: Hereby, Chal-Tec GmbH declares that the radio equipment type MM-5.1-JW is in compliance with the relevant statutory requirements. The full text of the declaration of conformity is available at the following internet address: use. berlin/10022256
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>