auna 10035746 Rockstar Plus User Manual
- June 3, 2024
- Auna
Table of Contents
10035746 Rockstar Plus
www.auna-multimedia.com
10035746
User Manual
10035746 Rockstar Plus
Dear Customer,
Congratulations on purchasing this device. Please read the following
instructions carefully and follow them to prevent possible damages. We assume
no liability for damage caused by disregard of the instructions and improper
use. Scan the QR code to get access to the latest user manual and more product
information.
TECHNICAL DATA
Item number | 10035746 |
---|---|
Power supply | 100-240 V ~ 50/60 Hz (DC: 12 V, 1.2 A) |
Output power | 12 W 10 % THD |
Operation temperature | 0-40 °C |
BT effective distance | 10 m (open air) |
BT frequency | 2402–2480 MHz |
BT radio-frequency power (max.) | -1.62 dBm |
SAFETY INSTRUCTIONS
General information
-
This product is not intended for commercial use. Household use only.
-
Lightning – If you are not going to use the device for a long time or if there is a storm, disconnect the plug from the electrical outlet and disconnect the device from the antenna connector. This will avoid damage to the product that may be caused by lightning or overvoltage.
-
Overload – Do not overload power outlets, extension cords, or built-in power outlets, as this may result in a fire or electric shock.
-
Foreign objects and liquid – Never push objects of any kind through openings in the device as they may touch dangerous voltage points or short out parts, which could result in a fire or electric shock. Never spill liquids of any kind on the device.
-
Repairs and maintenance – Do not attempt to service this product yourself, as opening or removing covers will expose you to dangerous voltages or other hazards. Leave all maintenance to qualified service personnel.
-
Damage requiring service – Disconnect the power plug from the outlet and consult a qualified specialist if any of the following conditions occur:
a) If the power cord or plug is damaged.
b) If liquid has been spilled or objects have fallen onto the product.
c) If the product has been exposed to rain or water.
d) If the product has been dropped or damaged.
e) If the product has a markedly reduced performance. -
Replacement parts – When replacement parts are required, make sure that the service professional who replaces the parts only uses replacement parts that have been approved by the manufacturer or that have the same characteristics as the original part. Unauthorized replacement may result in fire, electric shock or other hazards.
-
Heat – Do not place the unit near heat sources such as radiators, heaters, stoves or other products (including amplifiers).
Note: This device may be only used by children 8 years old or older and persons with limited physical, sensory and mental capabilities and / or lack of experience and knowledge, provided that they have been instructed in use of the device by a responsible person who understands the associated risks.
SCOPE OF DELIVERY
- Karaoke system (1x)
- AC adapter (1x)
- RCA cable (1x)
- Wired microphone (1x)
- Instruction manual (1x)
DEVICE OVERVIEW
1 LED SCREEN
2 CD Compartment
3 Power Indicator
4 POWER/MODE Button
5 Monitor on/off Button
6 A.V.C on/off Button
7 ECHO + Button
8 ECHO – Button
9 LED Decoration Light| 10 LIGHT MODE Button
11 MIC VOL Knob
12 REC Indicator
13 REC Button
14 REPEAT/PROG Button
15 SKIP- Button
16 SKIP+ Button
17 STOP Button
18 BT indicator| 19 PAIR/PLAY/PAUSE Button
20 BALANCE Knob
21 MASTER VOL Knob
22 AUX IN Jack
23 USB Jack
24 MIC 1 Jack
25 MIC 2 Jack
26 LED Decoration Light
27 Metal Grill
---|---|---
1 Handle
2 Microphone Holder| 3 VIDEO OUT Jack
4 AUDIO OUT (R) Jack| 5 AUDIO OUT (L) Jack
6 DC IN Jack
---|---|---
CONNECTIONS
Connecting the microphone
Connect the microphone into MIC 1 jack (24) as well as MIC 2 jack (25) when
desired.
Notes: Do not drop or tap the microphone as damage to the microphone or
speaker may occur. Do not twirl the microphone by cord as it will cause damage
to the encased wiring.
Connecting the unit to a TV
To output the video, lyrics and audio to your TV, perform the following steps:
- Connect the RCA video cable (Yellow) to the VIDEO OUT jack (3) and the audio cables (White and Red) to the AUDIO OUT jacks (4 and 5) located on the back of the karaoke machine.
- Connect the opposite end of the RCA video cable (Yellow) to the VIDEO IN jack and the audio cables (White and Red) to the AUDIO IN on your TV.
NOTES:
- This unit can be used with or without a TV, but it is highly recommended to use a TV in order to utilize all the features.
- Also please refer to the TV’s User Guide.
- To see the lyrics on the screen, you must use a CD+G disc or MP3+G \files.
Connecting power source
Insert the AC power cord into a conveniently located AC outlet having 240 V~
50 Hz.
Note: Make all connections before connecting to AC power.
OPERATION
Connecting to Line-in jack
- Press the POWER button (4) to turn the unit on.
- Insert the 3.5 mm audio cable (not included) into the AUX IN jack (22) of the unit.
- Press the MODE button (4) on the front panel to switch to AUX IN mode.
- Use the controls on the connected device to begin playing audio routed through the unit.
Disco Lights
There are three light modes as follows:
- Light Mode 1: The unit will synchronize to the music being played or with the sound when you speak or sing into the microphone.
- Light Mode 2: The unit will light up with random colours and patterns.
- Light Mode 3 : The light effects will be turned off.
NOTE: When the unit is turned on, the Light mode 1 is automatically activated. Press Light mode button (10) to switch to Light mode 2, and press again to turn off the light.
Playing a CD
- Press the POWER button (4) to turn the unit on.
- Lift open the CD door and insert a CD (with standard or MP3+G files) or a CD+G by gently pressing it on the center spindle. Then close the CD door.
What is a CD+G?| A CD+G (CD+Graphics) is the standard format for most karaoke discs that will display the words on the screen.
---|---
What is an MP3+G?| MP3+G is the newest format for karaoke music utilizing the MP3’s small file size. It will display the words on the screen. - Repeatedly press the MODE button (4) to select the CDG/CD mode; “CD READING” will appear on the screen when searching the disc and then the total number of tracks will appear.
- Press the PLAY/PAUSE button (19) to start playback. If listening to a CD+G file, the image and lyrics will appear on the screen:
- Adjust the volume to a comfortable level using the MASTER VOL knob (21).
- Connect microphones and slide the ON/OFF switch on the microphone to the ON position.
- Rotate the MIC VOL knob (11) to increase or decrease the microphone volume as you desired, which will affect both microphones.
- Press the ECHO -/+ button (7 and 8) to add an echo effect (From level 00 to Level 08) to your voice.
- Rotate the Balance Knob (20) to adjust the sound effect of the song. This function is only applicable to the songs recorded with separated vocals that is downloaded.
- Press A.V.C button (6), the lead vocal will be decreased and covered by your voice when you’re singing a song with microphone. This function is only applicable to the songs recorded with separated vocals that is downloaded
- REPEAT
• During playback, press the REPEAT/PROG button (14) once to repeatedly play the selected song, the LED screen will show a small icon ;
• Press it again to repleatedly play all the songs in the disc, the LED screen will show a small icon ;
• Press it again to cancel the repeat function, the LED screen will show a small icon
NOTES:
- Never place anything other than a CD in the compartment, as foreign objects can damage the unit.
- If no disc is inserted, “NO DISC” will appear on the display.
- If connected to a TV or other audio source, adjust the volume of the TV using its own volume control..
Playing songs from the USB
-
Press the POWER button (4) to turn the unit on.
-
Insert a USB flash drive into the USB slot (23) on the unit.
-
Repeatedly press the MODE button (4) to select the USB mode. “USB READING” will appear when searching the drive and then the total number of files will appear.
-
Press the PLAY/PAUSE button (19) to start playback. If listening to an MP3+G file, the image and lyrics will appear on the screen.
NOTE: If connected to a TV or other audio source, adjust the volume of the TV using its own volume control. -
Adjust the volume to a comfortable level using the MASTER VOL knob (21).
NOTE: If connected to a TV or other audio source, adjust the volume of the TV using its own volume control. -
Connect microphones and slide the ON/OFF switch on the microphone to the ON position.
-
Rotate the MIC VOL knob (11) to increase or decrease the microphone volume as you desired, which will affect both microphones.
-
Press the ECHO -/+ buttons (7 and 8) to add an echo effect (from level 00 to level 08) to your voice.
-
REPEAT:
• During playback, press the REPEAT/PROG button (14) once to repeatedly play the selected song, the LED screen will show a small icon ;
• Press it again to repeatedly play the selected folder; the LED screen will show a small icon ;
• Press it again to repeatedly play all the folders, the LED screen will show a small icon ;
• Press it again to cancel the repeat function, the LED screen will show a small icon . -
PAUSE:
• During playback, if you wish to pause the music momentarily, press the PLAY/PAUSE button (19).
• Press the PLAY/PAUSE button(19) again to resume normal playback. -
Press the STOP button (17) to stop playback.
-
Long press the POWER button (4) to turn the unit off.
Using a BT device
To pair an external BT device, perform the following procedure:
-
Press the POWER button (4) to turn the unit on.
-
Repeatedly press the MODE button (4) to select the BT, “BLUETOOTH” will appear on the screen. The unit automatically searches for and pairs a previously paired BT device (if previously paired). If no previously paired devices are present, connect as shown in the next step.
NOTE: You can also long press the PAIR button (19) to disconnect any paired devices in order to pair another device. -
Turn on your device’s BT option in settings to search for a discoverable device with a BT signal. Select “Rockstar Plus“ from the device results on the BT menu.
NOTE: Also refer to the user manual of your BT device for detailed instructions. -
The BT indicator will light solid and a chime will sound.
NOTES:
• If your BT prompts you for a pass code during the pairing process, please enter “0000” to connect.
• On some BT devices, once pairing is complete, select your BT device as “Use as Audio Device” or similar.
• If connection is lost after successful pairing, check to make sure the distance between speaker and BT enabled device does not exceed 30 feet/10 meters. -
Start playback of your BT device. Press the PLAY/PAUSE button (19) during playback to pause the song.
-
SKIP: Advance or go back one track by pressing the Skip -/+ buttons (15 and 16).
Using recording function
- To record your singing as well as the music, press the REC button (13). Recording will begin and REC indicator (12) will light solid.
- When done recording, press the REC button (13) again, the REC indicator (12) will turn off.
- The recorded audio file will be recorded onto the USB drive.
- To listen to the recorded song, press MODE button (4) to switch to USB Mode, you can find the recorded song in the REC file and press the SKIP -/+ buttons (15 and 16) to choose the song that you want to play.
- Press the PLAY/PAUSE button (19) to play the selected song.
NOTE: The recording MODE is available in BT, AUX, and CD mode. While in CD mode, it can only record the songs with CD, CD-R, CD-RW, and CD+G format, not available for MP3 format.
Using programming MODE
- While in the STOP mode, press the REPEAT/PROG button (8). ”PROG SET 01” will appear on the display indicating the fi rst program is ready to program.
- Select the fi rst track by using the SKIP -/+ buttons (15 and 16).
- Press the REPEAT/PROG button (14) again to confi rm the entry.
- Repeat to set up to 20 tracks into memory. When done, press the PLAY/PAUSE button (19) to start playback.
NOTES:
- Press the STOP button (17) twice to stop and clear the program.
- You can program up to 20 tracks for playback in any desired order. If more than 20 tracks are attempted to be programmed, “FULL” will appear in the display.
- The programming MODE is available in CD and USB mode.
CLEANING AND CARE
- Disconnect the unit from the power source when cleaning.
- If the unit becomes dusty, wipe it with a soft and dry duster.
- Use a soft cloth to clean this unit.
- Do not use any wax, polish sprays, or abrasive cleaners on the unit.
CAUTION
Risk of electric shock! Never allow any water or other liquids to get inside
the unit while cleaning.
TROUBLESHOOTING
Before contacting costumer service, check the troubleshooting information listed in the table.
Problem | Possible Cause | Possible Solution |
---|---|---|
No Power. | The unit is turned off. | Press the POWER button to turn on the |
unit.
The power cord is not connected correctly.| Make sure that the power cord is
properly connected to the rear of the unit.
The power outlet is broken.| Connect the unit to a different outlet.
No Sound – General.| MASTER VOLUME is set to minimum.| Adjust the volume with
the MASTER VOL control.
Correct MODE was not selected.| Select the correct MODE with the MODE button.
An external device is used.| Increase the volume on the external device.
No Sound – If connected to a TV.| Volume on the TV is muted or too low.|
Adjust the volume on the TV set.
The correct source was not selected on the TV’s menu.| Select the correct
source (usually AV).
Lyrics do not appear on the TV screen.| Video plug is not connected properly.|
Insert the video plug correctly.
The wrong source was selected on the TV set.| Select the correct source on TV
(usually AV).
The file/track being played is not a track recording with lyrics.| Only files
containing lyrics will be displayed on the TV.
AUX-IN or BT MODE is used.| In AUX IN or BT mode, nothing is displayed on the
TV screen. Use a different mode to display lyrics on the TV.
Problem| Possible Cause| Possible Solution
---|---|---
No sound from the microphone.| The microphone is not properly connected to one
of the microphone jacks.| Make sure that the microphone is correctly connected
to the MIC 1 or MIC 2 jack.
The microphone is turned off.| Slide the microphone ON/OFF switch to the “ON“
position.
The microphone volume is set too low.| Adjust the microphone volume with the
MIC VOL control.
The master volume is set too low.| Adjust the volume with the MASTER VOL
control.
USB files are not
played back.
| The USB files are corrupted.| Replace the files.
The file format cannot be played back from the unit.| Use files of a
compatible format.
The connected USB device is not supported by the unit.| Use a different USB
device.
External BT device cannot be paired with the unit.| The BT MODE of your
external device is disabled.| Activate the BT MODE of your external device
(refer to its user manual).
The unit is not in pairing mode.| Press the PAIR button to make the unit
visible to external BT devices.
After successfully establishing the BT connection, the music is not
available.| The BT device does not support the A2DP-BT profile.| Use a BT-
device that supports A2DP.
The volume of the external BT device is set too low.| Adjust the volume on the
external BT device.
DISPOSAL CONSIDERATIONS
If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
DECLARATION OF CONFORMITY
Manufacturer:
** Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Berlin Brands Group UK Ltd
PO Box 1145
Oxford, OX1 9UW
United Kingdom
Hereby, Chal-Tec GmbH declares that the radio equipment type Rockstar Plus is
in compliance with Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address:
use.berlin/10035746
For Great Britain:** Hereby, Chal-Tec GmbH declares that the radio
equipment type Rockstar Plus is in compliance with the relevant statutory
requirements. The full text of the declaration of conformity is available at
the following internet address: use.berlin/10035746
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>