auna 10045081 TT Play Plattenspieler User Guide

TT-Play
Turntable
10045081
10045082

10045081 TT Play Plattenspieler

Dear customer,
Congratulations on your purchase. Please read the following instructions carefully and follow them to prevent potential damage. We accept no liability for damage caused by disregarding the instructions or improper use. Please scan the QR code to access the
latest operating instructions and for further information about the product.

https://use.berlin/10045081

Technical Data

Output: DC 12.0 V / 2.0 A / 24.0 W
Speed| 33.33/45 RPM
Speaker| 2x1OW,4Ω
Records| Supports playback speeds: 33 1/3/45
Supports record sizes: 17.7 cm, 25.5 cm, 30 cm
Dimensions: (LxW x H)| Unit: 325 x 305 x 101 mm
L/R speaker: 298 x 164 x 97 mm
Turntable: 198 mm
Weight| Net weight: 4.57 kg
Gross weight: 5.82 kg
BT frequency| 2402-2480 MHz
BT transmission power (max.)| 2.8 dBm

PACKAGE CONTENTS

SAFETY INSTRUCTIONS

General instructions

• Lightning – If you do not use the device for a longer period of time or in the event of electrical storms, unplug the device from the power outlet or disconnect the device from the antenna connection. This prevents damage to the product due to lightning and overvoltage.

• Overloading – Do not overload electrical outlets, extension cords or integrated sockets as this may result in a fire or electric shock.

• Foreign objects and liquid entry – Never push objects of any kind into the unit through openings as they may touch dangerous voltage points or short out parts that could cause a fire or electric shock. Never spill liquids of any kind on the unit.

• Repair and maintenance – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages or other hazards. Leave all maintenance work to qualified service personnel.

• Damage requiring servicing – Unplug the appliance from the wall outlet and refer servicing to qualified service personnel when any of the following situations occur:
  a) If the power cable or plug is damaged
  b) If liquid has been spilled or objects have fallen onto the product.
  c) If the product has been exposed to rain or water.
  d) If the product has been dropped or damaged.
  e) If the product has a significantly reduced performance.

• Spare parts – If spare parts are needed, make sure that the specialist company replacing the parts only uses spare parts that are approved by the manufacturer or have the same characteristics as the original part.
  Unauthorised substitutions may result in fire, electric shock or other hazards.

• Heat – Do not install near any heat sources such as radiators, heat registers, stoves, or other products (including amplifiers).

Special notes

• Children over 8 years as well as mentally, sensory and physically impaired persons may only use the device if they have been informed in detail about the functions and safety precautions by a supervisor responsible for them beforehand and understand the associated risks.
• Children should be supervised to ensure that they do not play with the device. Make sure that children and babies do not play with plastic bags or other packaging materials.
• Make sure that the mains plug/mains adapter always remains easily accessible so that the unit can be quickly disconnected from the mains in an emergency.
• When you are no longer using the device, switch it off and pull the plug out of the socket.

DEVICE OVERVIEW

SETUP AND OPERATION

Notes on setup and operation

• Choose a safe location and avoid placing the unit in direct sunlight or near a heat source.
• Avoid environments subject to vibration, excessive dust, cold or humidity.
• Do not open the housing as there is a risk of electric shock. If a foreign object accidentally gets inside the unit, contact your dealer.
• Do not attempt to clean the unit with chemical solvents as this may damage the surface. A clean, dry cloth is recommended for cleaning.
• Keep these instructions for future reference.

First steps

• Connect the main unit and the speakers with the RCA cable.
• Plug the DC plug of the mains adapter into the DC IN connection on the back of the unit.
• Insert the plug of the power supply unit into the mains socket.

Phono mode

1. Set the function knob to PH mode. Turn the power switch on. The display will now flash red.

2. Place a record on the turntable and select the desired speed (33/45/78) according to the requirements of the particular record.
   NOTE: If you want to play a 45 RPM record, use the supplied 45 RPM adapter.

3. Remove the needle guard. Unlock the tone arm holder to release the tone arm. Push the cueing lever backwards to raise the tone arm and carefully move the tone arm to the desired position above the record.
   The turntable starts to rotate when the tone arm is moved towards the record. Push the cueing lever forward to slowly lower the tone arm to the desired position on the record and play the record.
   NOTE: The record will only start to spin if the tone arm is moved towards the record when the automatic shut-off is on.

4. If the auto-stop control switch is set to “ON”, the record will stop automatically when it finishes playing. If the auto-stop control switch is set to “OFF”, the record will not stop automatically when it finishes playing.
   NOTE: The auto-stop function applies to most 33 RPM records. However, in very few cases the record stops before it has finished playing, or it does not stop when it has finished playing, even though the auto-stop function is switched on.

5. Turn the volume knob to adjust the volume.

BT mode

1. Set the function knob to BT mode. The display turns blue and flashes.

2. Switch on the BT function on your mobile phone or tablet and then search for the record player with the name “TT-Play” in the device list.
   After pairing and connecting, the BT indicator lights up blue without flashing and you can play your music from your mobile phone or tablet on the turntable.

3. Turn the volume knob to adjust the volume.
   NOTE: The volume of the mobile phone or tablet also affects the overall volume. Adjust volume here as well to get a satisfactory sound.

REPLACING THE RECORD PLAYER NEEDLE

• Place a screwdriver on the tip of the needle and push it down (direction “A”).
• Remove the needle by pulling it forward and pressing it down.| • Hold the tip of the needle and insert the needle by pushing it in direction “B”.
• Push the needle upwards in direction “C” until the needle locks into the holder.

CLEANING AND MAINTENANCE

• Open and close the lid of the record player carefully.
• Do not touch the tip of the needle with your fingers. Avoid hitting the needle against the turntable or the edge of the record.
• Clean the needle tip regularly with a soft brush, stroking from back to front only.
• If you must use a needle cleaning fluid, use it very sparingly.
• Gently wipe the housing of the turntable with a soft cloth. Use only a small amount of mild detergent to clean the record player.
• Do not use aggressive chemicals or solvents to clean the device.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste.
Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.

DECLARATION OF CONFORMITY

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Berlin Brands Group UK Ltd PO Box 1145 Oxford, OX1 9UW United Kingdom
Hereby, Chal-Tec GmbH declares that the radio equipment type TT-Play is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: use.berlin/10045081
For Great Britain: Hereby, Chal-Tec GmbH declares that the radio equipment type TT-Play is in compliance with the relevant statutory requirements. The full text of the declaration of conformity is available at the following internet address: use.berlin/10045081

www.auna-multimedia.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>