Auna PRO PW-EV-12A Speaker User Manual

Auna PRO PW-EV-12A Speaker

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

SAFETY INSTRUCTIONS

General information

• Lightning – If you are not going to use the device for a long time or
  if there is a storm, disconnect the plug from the electrical outlet and disconnect the device from the antenna connector. This will avoid damage to the product that may be caused by lightning or overvoltage.

• Overload – Do not overload power outlets, extension cords, or built-in power outlets, as this may result in a fire or electric shock.

• Foreign objects and liquid – Never push objects of any kind through openings in the device as they may touch dangerous voltage points or short out parts, which could result in a fire or electric shock. Never spill liquids of any kind on the device.

• Repairs and maintenance – Do not attempt to service this product yourself, as opening or removing covers will expose you to dangerous voltages or other hazards. Leave all maintenance to qualified service personnel.

• Damage requiring service – Disconnect the power plug from the outlet and consult a qualified specialist if any of the following conditions occur:

  • If the power cord or plug is damaged.
  • If liquid has been spilled or objects have fallen onto the product.
  • If the product has been exposed to rain or water.
  •  If the product has been dropped or damaged.
  •  If the product has a markedly reduced performance.

• Replacement parts – When replacement parts are required, make sure that the service professional who replaces the parts only uses replacement parts that have been approved by the manufacturer or that have the same characteristics as the original part. Unauthorized replacement may result in fire, electric shock or other hazards.

• Heat – Do not place the unit near heat sources such as radiators, heaters, stoves or other products (including amplifiers).
  Note: This device may be only used by children 8 years old or older and persons with limited physical, sensory and mental capabilities and / or lack of experience and knowledge, provided that they have been instructed in use of the device by a responsible person who understands the associated risks.

TECHNICAL DATA

2 angled racks

| Device, power cord,

2 angled racks

Dimensions| 42 x 57,5 x 31 cm| 44 x 67,5 x 35 cm
Weight| 15,5 kg| 21 kg

PRODUCT OVERVIEW

1

| LED-Statusleuchte
---|---
Leuchtet, wenn das Gerät eingeschaltet ist.

2

| Mixer-Ausgang (Cinch) und Line-In (Cinch)
Schließen Sie hier Abspielgeräte wie CD-Player, Smartphones o.ä. an. Senden Sie das Signal duch den

„Mix Out“ an ein externes Mischpult

3

| Symmetrischer Eingang (XLR)
Schließen Sie hier akustische Instrumente, D.I.-Boxen oder Mikrofone an. Stellen Sie den Schalter jeweils in die passende Position (Anpassung des Eingangs-Pegels) für Line- bzw. Mikrofon-Signale („Mic“).

4

| 2 Mikrofon-Eingänge (6,3mm-Klinke)
Schließen Sie hier Mikrofone oder akustische Instrumente an.

5

| Klang- und Lautstärkeregler
Volume| Gesamtlautstärke
Bass| Bass-Regler
Treble| Höhen-Regler
Echo| Anteil des integrierten Echo-Effekts
Mic Volume| Anteil des Mikrofonsignals im Gesamt-Klang
6| Anschluss für zusätzliche (passive) Box (8 Ohm, SpeakOn)

7

| Netzumschalter
Stellen Sie hier die Lieferspannung ein (110V oder 220V).

8

| Power-Schalter, Netz-Anschluss
Verbinden Sie das Netzkabel hier und schalten Sie das Gerät ein/aus.

9

| Standwinkel
Stellen Sie die Box – wie unten zu sehen – auf die mitgelieferten Winkel, um einen „Wedge“-Abstrahlwinkel zu erzielen.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed
of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.

MANUFACTURER & IMPORTER (UK) 

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>