auna SC1 Audio Clock User Manual
- June 3, 2024
- Auna
Table of Contents
auna SC1 Audio Clock
Preface
Dear Customers:
Thanks for purchasing the aune SCl and congratulations on choosing this high-
quality audio clock.
We sincerely hope the SCl will bring you excellent Hi-Fi experience.
Please read this manual carefully before using the device.
SC1 at a Glance
Introduction
The SC1 is a high-steady-state low-jitter audio clock designed to provide high-quality clock signals to digital audio devices. The four 10MHz outputs (sine wave*2, square wave 2) can work simultaneously.
Misc
Enclosure material: premium machined and anodized aluminum DC supply: 12V 2A
Power: 20W
Specifications
- Output Frequency : 10MHz*4
- Output Power : 10MHz>7dBm(50Ω)
- Output Waveform : 2Square wave/2Sine wave
- Frequenc Accuracy (factory) : < ±0.02ppm
- Jitter (OXCO output) : <200F BW 1Hz-1MH z
- Warm-up Time : Basic warm-up: 5min
- Phase Noise : Phase Noise
- <- 100dBc@1Hzoffset
- <- 125dBc@10Hzoffset
- <- 145dBc@100Hzoffset
- <- 155dBc@1kHzoffset
- <- 160dBc@above10kHzoffset
- Ambient Temperature : Normal functioning: 0℃-50℃Recommended: 15℃-35℃
- Size : 288Wx211Dx63H(mm)
- Weight : 2kg
Operations
Clock Output
Use a BNC cable(75Ω) to connect the S9c and the SC1. Enable clock input on the
S9c.
aune ⼁ 430034 WUHAN ⼁ CHINA
Email:
sales@auneaudio.com⼁Fax:+86-27-85840435⼁www.auneaudio.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>