auna 10032916 Silver Star Stereo Instruction Manual

: May 15, 2024
: Auna

auna 10032916 Silver Star Stereo

Dear Customer,

Congratulations on purchasing this equipment.
Please read this manual carefully and take care of the following hints to avoid damages. Any failure caused by ignoring the items and cautions mentioned in the instruction manual are not covered by our warranty and any liability. Scan the QR code to get access to the latest user manual and other information about the product.

TECHNICAL DATA

Item number	10032916 10032917 10038351
Power adaptor	Input: 100-240 V ~ 50/60 Hz , 0.6 A Output: 12 V / 2 A
Connections	USB, AUX IN (3.5 mm), Headphone jack (3.5 mm)

SAFETY INSTRUCTIONS

Please read this instruction manual thoroughly before using this appliance!
Follow all the safety instructions to avoid damage cause by improper use. Keep the instruction manual for future reference.

Keep the instruction manual for future reference .Should this appliance be given to a third party ,then this instruction manual must also be handed over.
Use this appliance solely for it intended purpose.
This appliance is intended for household use only.
Use this appliance indoors or outdoors.
Danger of electroshock! Do not immerse the appliance, adapter or power plug in water or in other liquids.
Do not place the appliance in the direct vicinity of liquids – e.g. bathtubs and sinks, in a damp basement or close to a swimming pool.
Do not start up the appliance with damp hands or if you are standing on a wet floor. Never grasp the power plug with damp or wet hands.
The manufacturer assumes no liability for possible damages that may have been caused by incorrect usage or mishandling of the appliance.
This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely.
Young children should be supervised to ensure that they don’t play with the appliance.
Keep the appliance away from all hot surfaces and naked flames.
Do not place any object on the appliance. Don’t put objects with naked flames(such as candles) on or next to the appliance .Never put items containing liquid(such as vases) on or next to the appliance.
Do not expose the appliance to direct sunlight.
Do not use the appliance if it is damaged. To avoid hazards, defective components must only be replaced by the manufacturer, his customer service or similar qualified persons.
Do not dismantle and repair the appliance by yourself.
Do not insert any foreign objects into the housing.
Do not cover the appliance while in use.
This appliance should be only operated with the type of power source indicated on the marking label.
Always turn the power off before plugging the appliance into the power outlet or unplugging it.
Prevent damage to the power cord by not squeezing, bending or rubbing it on sharp edges. Keep the cord away from hot surfaces and open flames.
Always pull the plug, not the power cord when disconnecting the appliance from a power outlet.
Plug the appliance into a easily accessible socket, so that you can disconnect it quickly from the mains, in the event of an emergency.
Unplug the appliance from the power socket to switch it off completely.
Use the mains plug as a disconnecting appliance.
If the appliance malfunctions due to electrostatic discharge or short term overvoltage, disconnect it from the power supply and connect it once again.
Unplug the appliance during lightning storms or when unused for a long period of time..

PRODUCT DESCRIPTION

Front

Display
Standby button
Menu button
Fav button
Previous button
Next button
Dimmer button
Sleep button
Next button
Vol+/Vol-/OK knob
Rear
ON/OFF switch button
DC IN socket
Headphone jack (3.5mm)
AUX IN socket(3.5mm)
USB port
Port tube

REMOTE CONTROL

Standby button
Mute button
EQ set tone
Dimmer button
Sleep button
Alarm button
Previous button
Next button
Stop button
Play/ Pause button
Mode selection button
Home button
Up cursor button
Left cursor button
Right cursor button
Down cursor button
OK button
Vol- button
Vol+ button
Input letters and numbers button

INITIAL USE

Before operation, please make sure that the VOLTAGE mentioned on the power supply is same as the voltage of your local area.
Use the supplied mains adaptor to connect the device to a household mains socket.
Switch the device on with the power switch on the rear.
When it is the first time running the device, the system will ask you to set Language and Network Configurations. You may setup the network connection immediately, or set it later. Use Navigate to select the desired option. Press Navigate/OK to confirm.
Press Standby button when unit is power on, unit will go to standby mode. Press again will make it on again.

Network configuration

Normal network configuration
Select “Yes” for the normal Wireless Network Configuration: Then select the required AP by turning” Navigate” and confirm it by pressing” Navigate/OK”.
Enter WEP or WPA code to connect the WiFi network by select the correct character turning the “Navigate/OK” button.
Press button to select the next character.
In this condition, press button you can turn left and delete the left characters at the same time: when the password is complete please press” Navigate/OK” button to confirm.

Note: Below characters are available for the radio:
Numbers (from 0-9) English letters (from A to Z and from a to z) Other characters ( DEL, @, Blank, ,!,”,#,$,%,&,*,’,+ and (,)
WPS PBC network configuration
Select “Yes WPS” when you would like set up with Wireless Network (WPS PBC) feature: If you are using a router with WPS button, you may set up the network connection simple via WPS function. Enter it and go to press the WPS button on your router within 120 seconds. The connection between the router and the Radio will then be configured automatically.
No network configuration
Pls select “NO” when you do not like to configure the network connection at the moment.

The radio will start connecting to the network. After the router is connected successfully, it will show “Network OK” and display the menu screen:

BASIC OPERATION

Rotate button and press OK to access a menu item.

To go back to the last menu level press LEFT.

INTERNET RADIO

Press “Standby” to go to working mode and rotate Navigate to scroll through the main menu. Press OK (to enter sub menus or confirm settings)
Press < to return to the previous menu.
After connection of any station successful, station information will be shown and information content can be changed with < or > button.

My Favorites
List of my favorite preset stations. It supports 250 favorite entries including stations and folder. During the station playing screen, press and hold Fav on the device or” Fav add “on the remote control to save the station as my favorite. You may replace the previous saved station to the new one.
If the Selected station has been saved, you cannot save it again. The saved stations are showed under this menu. You may also press Fav to enter the saved station list. You may enter the number key on the remote control to recall the saved station.
Under the preset station list, move to your station; press OK from unit or OK from remote control to listen.
Enter its submenu with > button, Delete, Shift Up/Down along the list, Rename, Play, or Use as Alarm (if you chose internet as alarm sound in alarm configuration).

Radio Station/Music

Stations are categorized into Global Top 20, Genre, Country/Location (Africa, Asia, Europe, Middle East, North America, Oceania/Pacific and South America) and Highlight. Enter to continue the subcategories and choose the station to listen.

For each station, press OK from unit or remote control to play directly Press

to enter its submenu. When you choose Auto Scan, it becomes the playback of marquee of each station in the subcategory. Each station plays 30 seconds until all have played or you press “OK” to stop the marquee listening. Press > button to view the display information of the playing station.

Local Radio
Stations are categorized to the country/location which the unit is operated.

Sleep Radio
You can choose Birds, Piano, Rain, Spa, Space, and Wave as sleep radio.

History
List of the ten recently listened stations.

Service

Search radio station-Enter your keyword to search radio station from the list.
Add new radio by adding IP address, the added stations will be stored in My Favorite. Note that the maximum character of the station name is 250.

MEDIA CENTER

Select the USB/UPnP mode or playlist mode with Navigate/OK or with the Mode button.

UPnP

If you have set up shared media, you should see the shared media from UPnP.
If you have more than one computer sharing media, the alternatives are listed.
Select the shared media you want to play. Use Play/Pause (10), Next/Prev (8, 7) and Stop (9) .Press Right cursor button (15) to view the display information of the playing track.

Note: The radio can only read the track with the file name less than 40 characters. The characters should be in European Language. If you encounter failure of reading the track under UPnP mode, you may try to rename the file. However, if the track is still unable to play, you can try converting the file to different formats.

USB

From this point on, menus are generated from the folders on the USB device. Brows folders with the NAV wheel or direction keys (16/10/9/8) on the remote control.

The display shows folder and file names (not necessarily track names).

Once you have found a track you want to play, press the navigate wheel on the device or press OK on the remote control.

Note: The USB port does not support charging or data transfer with computers.

My Playlist

You can create a playlist of favorites music from UPnP. When you playing the music, press and hold OK from unit or remote control to save it into My Playlist

Clear My Playlist

Please select this option for clearing the playlist .Please confirm the questions.

My media U

Display and playback your own mediaU station list on the mediaU server. Set your account first. To activate your own station list, follow the steps below:

Access http://www.mediayou.net/. Join my mediaU membership. Login to the website;

Enter the wireless MAC address of Radio to the mediaU website.

This information can be obtained in information Center>System information>Wireless Info;

When successfully configured, you are able to save and view your own mediaU station playlist(s). Username and password is not required to enter to the Radio.

If there are different accounts stored in Radio, you can choose the one you currently use under Configuration menu. On the website, you may save stations to Favorite Station, set Favorite Location/Genre and My Local City, or add stations manually. The stations can be viewed from My Media mode on the Radio.

INFORMATION CENTER

Weather Information

There are weather information and forecasts for 2000 cities.
Select the country and then the city for the weather details.
Press </> to see the weather forecasts.
The device is able to display the weather information on the standby mode. On the weather information page, press OK to set the city to displaying on the standby mode. Then turn on the weather display.

Financial Information

View the stock index

System Information

View details of units and of connect network. The information includes MAC address which you are required to fill in when registration of “my mediaU” membership.

CONFIGURATION

Time Display	Analog/digital
MyMedia	When it is enabled, my mediaU will exist on the main menu. If

various media accounts exist in the Radio, Select the default login account in here.
Netzwerk| Wireless Network Configuration : Enable/disable WiFi network. When you enable the WiFi network, the system will automatically select the required AP. Enter WEP or WPA code to connect the WiFi
Wireless Network (WPS PBC) : If you are using a router with WPS/QSS button, you may set up the network connection simple via WPS function. Enter it and go to press the WPS/QSS button on your router within 120 seconds. The connection between the router and device will then be configured automatically.
Manual Configuration : You can choose DHPC (which IP assigned automatically) or manually input IP address for wireless network connection. When you select manual setting for wired connection, the following have to be entered: SSID (name of access point), IP Address, subnet mask, default gateway, preferred DNS server, alternate DNS server.
Check Network When Power On : : Enable/disable WiFi network. When you enable the WiFi network, the system will automatically search the available AP. Select required AP.
Date & Time| Setup the date and time
Set time format display as 12 Hour or 24 Hour.
Set date format (YYYY/MM/DD; DD/ MM/YYYY; MM/ DD/YYYY)
(Y=Jahr, M= Monat, D= Tag) Daylight Saving Time :
“ON:, the time will be one hour More than the actual time.
OFF: the time will be same as the actual time. If it was on the model of the “Daylight Saving Time(DST) and you choose” OFF”, the time will be deducted one hour ,that’s to say, the time will be same as the actual time.
---|---
Alarm| There are three independent alarms-2 alarms of absolute time setting (Alarm 1 and Alarm 2) and 1 alarm for relative time setting (Alarm NAP).Press Alarm on the remote control to enter this menu directly.
Note that the alarm source is from the preset Internet radio if Alarm Sound is set to be Internet Radio. It can only set one same IR station for Alarm 1 and Alarm 2.When the alarm is reached the unit connects to the Internet if the set network is available. Therefore there may be some delay from the alarm to the radio play. If no network is connection can be established within one minute, the alarm will change to Melody automatically. When Alarm” NAP” is set, it alarms once in 5/10/20/30/60/90/120 minutes depending on which one you have set.
Choose Alarm Volume to configure the volume of the alarms.
Timer| Countdown timer (max. 100 Minuten)
Language| English /Deutsch / Espanol /Francais / Portuguese / Nederlands / Italiano / Pyccknn / Svenska / Norske / Dansk / Magyar /Cesky /Slovensky / Polski / Turkce / Suomi
Dimmer| Power Saving / Turn On
Display| Color/ monochrome
Power Mgmt| Configure to go to standby mode automatically during in the menu or/ and without Wifi signal. Choose the power management timer ( 5/15/30mins) to set the duration of the radio to switch standby mode automatically when you are not controlling it. Choose Turn off to ignore the power management function.
---|---
Sleep Timer| Turn off or set the sleep timer of 5/ 30/ 60/ 90/ 120/ 150/ 180 minutes. Once the time is set, there will be a bed icon with remaining minutes at the top right corner and the device will turn to standby then .Press Sleep on the remote control for the shortcut of this function.
Buffer| Configure the buffer time of the music playback,2/4/8 seconds.
Weather| Activate/deactivate the weather forecast for the standby display. Choose your preferred temperature unit (°C or °F) and then proceed entering your location. When activated, the weather forecast is shown in turns with the clock display on the standby screen (each 10 secs).
Local Radio Setup| There is a shortcut Local Radio under Internet Radio so that you can easily go to the station list of your location. You may Manual Setup your location, or let the system Auto Detect your current location. The system detects the location according to the IP address of your connected network. Press Local Station to enter this local radio list directly.
Playback Setup| Setup Select the playback mode of media center-Off ( no repeat or shuffle),Repeat all, Repeat one, or Shuffle.
Device| Default device name for DLNA is “AirMusic”. You may rename it for DLNA setup on the PC or mobile. QR code for down lode and install “AirMusic” control App.
Equalizer| Default equalizer is Normal, you may change to Flat, Jazz, Rock, Soundtracks, Classical, Pop, News or my EQ. Press EQ on the remote control to swap among the EQ mode for shortcut..
Resume When Power On| The system is default to resume internet radio playback if you were listening to internet radio or media center before switch off the unit. If turn this setting off, the system will remain in the main menu when switching on the unit.
Software Update| Update software. If there is an updated software version on the server, the system will notify you .Before starting a software upgrade, ensure that the unit is plugged into a stable mains power connection. Disconnected power during a software update may permanently damage the unit.
---|---
Reset to Default| Restore the default settings. After the device is reset, the system will move to language is elected.

DNLA / UPNP

You may change the default DLNA name as you like. The information below is the introduction of how to setup media streaming from PC or other media server. Study the own instruction of the software or apps you use to enjoy music streaming if necessary. Make sure the music files are in the format of MP3,WHA,WAV or AAC for music streaming to the radio.

UPnP

Connect the PC to the network.

Ensure the Radio is powered on and connected to the same network.
Open the UPnP platform Windows Media Player (11 or later).Alternatively, other platforms or server such as Windows Media Connection may be used.

Allow to share your media to Radio.

Add the audio files and folders you want to share with radio to the media library.
You may also enjoy the streaming music from other music server, such as smart phone (Android platform).

DLNA

The PC system requirement for DLNA is Windows 7 and Windows Media Player 12.Setup as below:

First, share the media on your PC to Radio.
Control Panel > Network and Internet >Network and Sharing Center >
Change Advanced Sharing>Media streaming options.

Open Windows Media Player to enable Allow remote control of my Player.
Right click any music in the library and choose Play to Radio.
There will be a window for controlling music playback on Radio.

You may search and install any free or commercial DLNA apps from Google Play or Apple Store if you are using Android mobile, tablet or iPhone / iPad.
It is suggested to use bubbleUPnP, Twonky.

Beam on Android mobile, tablet or Twonky Beam on iPhone /iPad. Some apps may not support streaming music from iPhone /iPod but iPhone/iPod could still be used to control streaming music from other servers.

Procedures for playing shared music on the app are as follows:

Select Radio as the player. Some apps may allow playing the music to multi players at the same time.
Select music server and choose the music .Some app can create a playlist if you choose several music.

Please note: When using DLNA music streaming function on the Internet Radio, you can only control the volume and standby via the unit. It is restricted to control the other functions. Stop DLNA on PC, mobile or tablet before you resume Internet radio’s own control.

Control via Air Music Control

You can operate the internet radio via you smartphone or tablet.

Download “Air Music Control“ from the “Google Play Store“ or “Apple AppStore“.

The devices must be connected to the same network.

AUX (LINE INPUT)

Aux in mode plays audio from an external source such as an MP3 player.

To play audio with Aux in mode

Turn the volume low on both the Radio and if adjustable, the audio source device.

Connect the external audio source to the AUX IN 3.5 mm stereo socket. Either press MODE until the display shows AUX IN or selects AUX in under Main menu. Adjust the volume of the Radio (and, if necessary, the audio source device) as required.

BT

Either press MODE until the display shows BT or selects BT under Main menu. It will have remind sound “pairing”, search the pairing name “Silver Star Stereo” in your phone and click it to pair. It will have reminding sound “connected” after paired successfully. You now can play music via BT; you can adjust volume from the radio or your phone.

FM OPERATION

Select ‘FM mode’ on the main display screen with the navigation knob or with the navigation buttons on the remote. Once selected, the FM mode will start on 87.5 MHz.
To save all stations with strong signal, press the navigation knob, it will show “auto scan?” choose YES. Then it will start auto scan. Once the autoscan is complete, stations will be saved in your favorites. You will then be able to browse through these saved stations by holding down the ‘<’ or ‘>’ buttons to skip between saved stations. To manually scroll through FM frequency, simply press the ‘<’ or ‘>’ buttons to go backwards or forwards through the frequency wave.

Pre-setting your favourite FM stations

To save presets manually, select and listen to the station frequency number for the station you wish to save.
Follow by holding down the ‘Fav’ button for 1-2 secs and the number ‘01’ will display on the screen. Use the navigation knob to browse through preset numbers(up to 99) and select the chosen presto number you wish to save it as by pressing the navigation knob.

Recalling preset FM stations

View your favourite FM stations when you are on FM mode by simply selecting the ‘Fav’ button and begin scrolling through saved stations.

DAB+ OPERATION

Select ‘DAB/DAB+’ on the main display screen by turning the knob and pressing the navigation knob or with the remote navigation buttons.

On first use of the DAB on your radio, your radio will begin scanning for DAB stations and will show’ Scanning’ on the display screen. It will display how many stations have been found as the search continues.

Once all of the available stations have been found, the screen will display the choice of available stations. Scroll through using the navigation knob or navigation buttons to select the station you wish to listen to.

When you have selected a station, the screen will display the station and press navigation knob to play. To choose previous or next station, use the navigation knob to scroll accordingly.

To go back to the list to scroll through manually, select the ‘<’ button to go back. To rescan your stations, go on the main list page for the DAB stations and there will be reminder ‘Delete station list?’ .Choose ‘YES’ to do rescan. When on your chosen station, select the ‘>’ button to show information on the station. The screen will automatically scroll through information and display genre, MHz, song playing, KHz and Kbps.

Pre-setting your favorite DAB/DAB+ stations

When you have found your desired station, hold down ‘Fav’ for a few seconds to go to the ‘Add to my Favorites’ screen. Turn the select dial to choose the preset number(1 to 6) and select your option. Alternatively, when you are on the list screen of DAB stations you are able to highlight the chose station and hold down ‘Fav’ to go to the ‘Add to my Favorites’ screen.

Recalling preset DAB/DAB+ stations

View your favorite DAB/DAB+ stations when you are on DAB mode by simply selecting the ‘Fav’ button and begin scrolling through saved stations.

TROUBLESHOOTING

Problem	Cause / Solution

If you have trouble connecting the radio to your wireless network, these steps may help to resolve the problem:| Confirm that a Wi-Fi or Ethernet Wired connected PC can access the internet (i.e. can browse the web) using the same network.
Check that a DHCP server is available, or that you have configured a static IP address on the radio.
Check that you firewall is not blocking any outgoing ports.
Some access points may be set so that only equipment with registered MAC addresses can connect to them.
This is one possible cause of the Internet Radio being unable to connect to the Wi-Fi network, and the Internet
Radio display will show Bad ESSID or key. To overcome this problem you will need to add the Internet Radio’s MAC address to the list of allowed equipment in your access point. The Internet Radio’s MAC address can be found using the menu <Information Center ->System Information -> Wireless Info > MAC address>. You will need to refer to the guide for you Access Point in order to enter the Internet Radio as an allowed piece of equipment.
If you have an encrypted network, check that you have entered the correct key or passphrase into the radio.
Remember that text-format keys are case sensitive.
If your wireless network name (ESSID) is ‘Hidden’(a setting on the wireless access point), then you can either turn on the name, or you can manually enter the name into the internet radio and media player, ENTER <Configure -> Network -> Manual Configuration-> Wireless -> Enter ESSID>. Confirm if the network is encrypted, e.g. requires a WEP or WPA key, then enter the network name..
If your radio can connect to the network successfully, but is unable to play particular stations, it may be due to one of the following reasons.| The station is not broadcasting at this time of the day (remember it may be located in a different time zone). The station has too many people trying to attach to the radio station server and the server capacity is not large enough.
The station has reached the maximum allowed number of simultaneous listeners.
The station is not broadcasting anymore.
The link on the radio is out of date. This is updated automatically every day, so the next time you turn on the link will be recognized.
The internet connection between the server (often located in a different country) and yours is slow. Some internet service providers may fail to stream in certain geographical areas. Try using a PC to play back the stream via the broadcaster’s web site. If you can play back the station with a PC, please report to the customer service where you bought this radio. If you have a laptop, try connecting it if your Internet Radio cannot find the station.
---|---
When you scan for PCs under UPnP function, none can be found, or the PC you are looking for does not appear in the list.| You have not connected to the wireless Access point. On the internet radio, ENTER ‘Configuration’, ‘Network’, ‘Wireless network connection’ and then ENTER your Wireless network. (You may need to enter a security key to access the network wirelessly).
You have a firewall set on your PC which is stopping you accessing shared files.
If you have a third party firewall (Like Norton, or Zone Alarm) that will have its own control panel and you will need to consult the manual for your firewall.
If your PC is connected to a managed network, with a server sometimes the PC being searched for needs to be server Workgroup..
I can’t share a folder, as the option is not highlighted.| When the internet radio is scanning the content of the folders on a PC, it is possible that a scan error may occur if the windows file sharing application times out.
This is most likely to occur if both the PC with the media content and the Internet Radio are connected wirelessly.
Try reconnecting the PC with the media content into the network via cable. This will dramatically increase the speed at which the Internet Radio is able to scan the content of the Media PC.
Scan-Error| When the internet radio is scanning the content of the folders on a PC, it is possible that a scan error may occur if the windows file sharing application times out.
This is most likely to occur if both the PC with the media content and the Internet Radio are connected wirelessly.
Try reconnecting the PC with the media content into the network via cable. This will dramatically increase the speed at which the Internet Radio is able to scan thecontent of the Media PC.
---|---
If the Internet Radio keeps rebuffering the radio station:| The Internet Radio is streaming the data from the radio station via your broadband connection, if there is a high error rate on your broadband connection, or the connection is intermittent, then it will cause the Internet Radio to pause until the connection is re-established and it has received enough data to start playing again.
If your Internet Radio keeps stopping, please check the DSL modem to ensure that the Broadband line is not suffering a high error rate or disconnections. If you are experiencing these problems, you will need to contact your broadband supplier.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.

This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.

DECLARATION OF CONFORMITY

Manufacturer:
Chal-Tec GmbH, Wall strasse 16, 10179 Berlin,
Germany.

Importer for Great Britain:

Berlin Brands Group UK Limited
PO Box 42
272 Kensington High Street
London, W8 6ND
United Kingdom

Hereby, Chal-Tec GmbH declares that the radio equipment type Silver Star Stereo is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: use. berlin/10032916

For Great Britain: Hereby, Chal-Tec GmbH declares that the radio equipment type Silver Star Stereo is in compliance with the relevant statutory requirements. The full text of the declaration of conformity is available at the following internet address: use. berlin/10032916