TYGER TG-LD2F60358 Lander Running Board Instruction Manual
- June 1, 2024
- TYGER
Table of Contents
TYGER TG-LD2F60358 Lander Running Board
Product Information
Specifications:
- Brand: TYGER LANDERTM
- Model: TG-LD2F60358
- Fastener Torque Values:
Fastener Size | 6mm | 8mm | 10mm | 12mm | 14mm |
---|---|---|---|---|---|
Class 8.8 Torque (ft-lbs) | 6-7 | 15-16 | 31-32 | 54-55 | 87-88 |
Class 10.9 Torque (ft-lbs) | 6-7 | 22-23 | 44-45 | 78-79 | 125-126 |
Parts List:
- x1 Driver/Left Tyger Lander
- x1 Passenger/Right Tyger Lander
Product Usage Instructions
Step 1: Remove Contents and Verify Parts
Remove all contents from the box and ensure all parts are present. Read the
instructions carefully before proceeding with installation.
Step 2: Front Mounting Bracket Installation
Starting from underneath the Passenger/Right body panel, locate the front
mounting location and remove the plastic plugs covering the holes. Attach the
Passenger/Right Front Mounting Bracket using specified hardware.
Frequently Asked Questions (FAQ):
Q: What should I do if I find missing parts or damage?
A: If you find any missing parts or damage, please take a picture for
claim purposes and visit
www.tygerauto.com/contact to file your
claim.
Q: Where can I find customer support?
A: For customer support, please visit www.TygerAuto.com/contact-
us.html.
BEFORE INSTALLATION
READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT. FAILURE TO IDENTIFY DAMAGE BEFORE INSTALLATION COULD LEAD TO A REJECTION OF ANY CLAIM. IF MISSING PARTS OR ANY DAMAGE FOUND, PLEASE TAKE A PICTURE FOR THE CLAIM PURPOSE. TO FILE YOUR CLAIM, PLEASE VISIT: WWW.TYGERAUTO.COM/CONTACT
TORQUE VALUES
Fastener Size | Class 8.8 Torque (ft-lbs) | Class 10.9 Torque (ft-lbs) |
---|---|---|
6mm | 6-7 | 6-7 |
8mm | 15-16 | 22-23 |
10mm | 31-32 | 44-45 |
12mm | 54-55 | 78-79 |
14mm | 87-88 | 125-126 |
Parts List
- x1 Driver/Left Tyger Lander
- x1 Passenger/Right Tyger Lander
- x1 Driver/Left Front Mounting Bracket
- x1 Passenger/Right Front Mounting Bracket
- x1 Driver/Left Center Mounting Bracket
- x1 Passenger/Right Center Mounting Bracket
- x1 Driver/Left Rear Mounting Bracket
- x1 Passenger/Right Rear Mounting Bracket
- x8 10mm x 35mm Hex Bolts
- x12 10mm x 25mm Hex Bolts
- x12 10mm Lock Washers
- x28 10mm x 27mm OD x 3mm Flat Washers
- x8 10mm Nylon Lock Nuts
- x4 8mm x 25mm Combo Bolts
INSTRUCTION
STEP 1
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION.
STEP 2
Starting from underneath the Passenger/Right body panel, locate the front
mounting location and the threaded holes in the body panel (Fig 1). Remove the
plastic plugs covering the holes.
STEP 3
Select the Passenger/Right Front Mounting Bracket. Attach the Mounting
Bracket to the front location with (2) 10mm x 25mm Hex Bolts, (2) 10mm Lock
Washers and (2) 10mm Flat Washers (Fig 2). DO NOT tighten hardware.
STEP 4
Repeat STEPS 2 & 3 to attach (2) Rear Mounting Brackets to the center and
rear locations (Figs 3-5). DO NOT tighten hardware.
STEP 5
Select the Passenger/Right Tyger Lander. Place the Tyger Lander onto the
cradle of the Center Mounting Bracket.
IMPORTANT: DO NOT slide the Tyger Lander front to back or damage to the finish may result. Attach the Tyger Lander to the Front and Rear Mounting Brackets with (4) 10mm x 35mm Hex Bolts, (8) 10mm Flat Washers and (4) 10mm Nylon Lock Nuts (Fig 6). DO NOT tighten hardware.
STEP 6
Attach the Tyger Lander to the Center mounting Bracket with (2) 8mm Combo
Bolts (Fig 7). DO NOT tighten hardware.
STEP 7
Level and adjust the Tyger Lander and tighten all hardware.
STEP 8
Repeat STEPS 1-7 to attach the Driver/Left Tyger Lander.
STEP 9
Do periodic inspections to the installation to make sure that all hardware
is secure and tight.
Customer Support: www.TygerAuto.com/contact-us.html
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>