SKOWLL Bathroom Faucets Single Hole 1 Handle Vanity Sink Faucet Instruction Manual
- June 1, 2024
- SKOWLL
Table of Contents
SKOWLL Bathroom Faucets Single Hole 1 Handle Vanity Sink Faucet
Overview
This document provides detailed instructions for the installation of a SKOWLL
faucet. It includes a parts list, a diagram illustrating the assembly, and
step-by-step installation guidance.
Dimensions
- Height: 6.7in/171.5mm
- Spout Reach: 4.7in/120mm
- Width: 1.7in/42mm
- Base Width: 1.3in/32mm
- Total Height: 6.3in/160mm
- Spout Height: 4.1in/105mm
Installation Instructions
- Please read this instruction before installation, and install to avoid unnecessary loss caused by improper installation.
- Before installing the faucet, be sure to clean up the debris in the pipe to avoid blockage.
- The faucet and the hot and cold water supply pipes must be connected correctly, that is, facing the faucet, the left side is connected to hot water, and the right side is connected to cold water.
- All illustrations and dimensions in this manual are for reference only, and the actual situation shall prevail in kind.
Installation Steps
- Make holes on the table, according to the size of 1.3 ~ 14in/32~35mm on the left or measure the actual size.
- After screwing the tooth tube into the bottom of the faucet, put it into the decorative bottom plate and the bottom plate gasket.
- Thread the hose through the fixing nut and washer from the bottom as shown.
- Screw the hose into the bottom of the faucet according to the hot water on the left; cold water on the right.
- Fix the faucet with the fixing nut.
- Connect the hose to the angle valve (see the next page for this step).
FAQ
-
Q: What size should the hole in the countertop be?
A: The hole should be between 1.3-1.4 inches (32-35mm) in diameter. -
Q: Which side of the faucet is for hot water, and which is for cold?
A: Facing the faucet, the left side is for hot water, and the right side is for cold water. -
Q: Are the dimensions provided exact?
A: The dimensions are for reference only; the actual product size should be measured for precision. -
Q: Can I find additional support if I encounter issues during installation?
A: It’s recommended to consult the manufacturer’s customer support for assistance with any installation problems.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>