SKOWLL 95829 Bathtub Faucet with Sprayer Waterfall Roman Tub Faucet Set Instruction Manual

SKOWLL 95829 Bathtub Faucet with Sprayer Waterfall Roman Tub Faucet Set

Exploded Diagram Description

• An exploded diagram shows the components of a shower installation kit. From top to bottom, the components are laid out in the order they would be assembled.
• At the top, there are small square and hexagonal items, likely representing screws or connectors. Below these are larger hexagonal components, possibly valve controls, followed by cylindrical shapes that may indicate the valves themselves.
• Further down, the largest items appear, which include a flat, rectangular shape that could be the mounting plate or bracket, followed by what appears to be an LED waterfall spout at the bottom.

Specifications

Not specified
Cold water pipe| Pipe for cold water supply| Not specified
Shower hose| Hose for shower head| Not specified
Hot Angle valve (9/16)| Valve at an angle for hot water| 9/16
Cold Angle valve (9/16)| Valve at an angle for cold water| 9/16
Shower seat shower hand| The handheld component of the shower| Not specified
Transforms the control valve| Valve to control the transformation between shower modes| Not specified
LED waterfall spout| Spout with LED lighting and waterfall feature| Not specified
Hot water valve| Valve to control hot water flow| Not specified
Cold water valve| Valve to control cold water flow| Not specified

Installation Details

• Leave a gap of about 0.1in/2mm during installation.
• Overall dimensions indicate a width of 5.9in/150mm for the connection area.
• The hot water pipe and waterfall connection water pipe are connected to their respective angle valves.
• The shower hose is connected to the cold angle valve.

Shower Head Installation

• The shower head is installed at a height of 1.6in/41mm from the wall.
• The shower hose extends from the cold angle valve to the shower head.

Faucet Installation

• The opening center distance should be a minimum of 2.4in/60mm.
• The spout reach is 4.4in/113mm.
• The handle height is set at 1.18in/30mm.

FAQ

What is the recommended gap to leave during installation?

• It is recommended to leave a gap of about 0.1in/2mm during installation.

What are the dimensions for the shower head installation?

• The shower head should be installed at a height of 1.6in/41mm from the wall.

What should be the opening center distance for the faucet?

• The opening center distance for the faucet should be a minimum of 2.4in/60mm.

How far should the spout reach out from the wall?

• The spout should reach 4.4in/113mm from the wall.

What is the handle height for the faucet?

• The handle height for the faucet is 1.18in/30mm.

Exploded Diagram Description

Dimension

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>