SKOWLL Shower System Ceiling Mount LED 12 Inch Rainfall Shower Fixtures Set User Guide

SKOWLL Shower System Ceiling Mount LED 12 Inch Rainfall Shower Fixtures Set User Guide

DIMENSHTION

Installation Instruction

1. Tighten an appropriate amount of raw material tape around the water pipe joint

2. Connect the valve body to the water pipe
   

3. Reserved wall depth (Refer to Figure 1 and Figure 2 for dimension drawings) Connect the valve body to the water pipe
   

4. Fix the valve body to the wall with screws as shown in the picture ( the

5. balance of the valve body can be adjusted with the help of a spirit level)

Installation

1. Unscrew the screw with a screwdriver

2. Take out the valve body cover

3. Put the decorative cup into the hanging pipe, and wrap a proper amount of raw material tape tightly

4. Fasten the hanging pipe to the water pipe in the wall

5. Top spray shower head mounted on hanger pipe

6. Insert the panel into the valve body

7. Install the handwheel and handle

8. Fix the handwheel and handle with the hexagon handle and then install the trim button (Accessories)
   

9. Put the shower decorative cup into the shower seat, and wrap the appropriate amount of raw material tightly.

10. The shower seat is installed with the water pipe in the wall

11. Connect the shower hose to the shower seat

12. Connect the hand shower to the shower hose
    

13. Put the shower decorative cup into the shower jet, and wrap the appropriate amount of raw material tightly.

14. Fasten the shower jet to the water pipe in the wall

15. Follow the same steps to install the remaining 5 shower jets into the water pipes in the wall.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>