SKOWLL 7416W-MB Rain Shower System Wall Mount 12 Inch Bathroom Overhead Shower Kit Installation Guide
- May 15, 2024
- SKOWLL
Table of Contents
7416W-MB Rain Shower System Wall Mount 12 Inch Bathroom Overhead Shower
Kit
Installation Guide
7416W-MB Rain Shower System Wall Mount 12 Inch Bathroom Overhead Shower
Kit
| 13 | Handheld |
|---|---|
| 12 | Raw Material Tape |
| 11 | Accessory Pack |
| 10 | Shower Hose |
| 9 | Shower Seat |
| 8 | Shower Handheld |
| 7 | Shower Holder Cover |
| 6 | Shower Head |
| 5 | Shower Arm |
| 4 | Shower Arm Cover |
| 3 | Hand Wheel |
| 2 | Panel |
| 1 | Digital Valve Body (Double Functions) |
| NO | Name |
-
Embedded wall depth (refer to the dimension drawings in Figure 1 and Figure 3).
-
Connect the valve body to the water pipe.
-
As shown in the picture, fix the valve body on the wall with screws (the balance of the valve body can be adjusted with the aid of a level).
-
Put the decorative cover into the shower arm, and wrap an appropriate amount of raw material tape tightly, then install the shower arm into the water pipe in the wall.
-
Install the shower head on the shower arm.
- Put the Shower Holder Cover into the shower seat, and wrap an appropriate amount of raw material tightly.
- Install the shower seat in the water pipe inside the wall.
- Connect the shower hose to the shower seat.
- Connect the shower handheld with the shower hose.
- Connect the wire connector and tighten the nut (NOTE: the arrow is facing the direction of the arrow).
- Insert the panel into the valve body.
- Install the hand wheel and handle.
- Fix the hand wheel and handle with the hexagonal key lock screw, and then install the decorative button (accessory package).
In order to keep the surface clean and bright, please clean the product regularly, the cleaning method is as follows:
-
Use clean water and a soft cloth to remove surface dirt as much as possible.
-
Use one of the cleaners listed below to remove surface dirt.
Mild liquid cleanser.
Colorless glass cleaner that completely dissolves non-abrasive, powdered cleaners (mix according to manufacturer’s directions).
Non-abrasive polishing fluid.
Never use abrasive cleaners, abrasive cloths or paper towels.
Never use any acidic cleaning agents. -
After cleaning, please immediately remove all detergents with clean water and dry them with a soft cotton cloth.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>