SKOWLL Bathroom Faucet Widespread 2 Handle Deck Mount Vanity Sink Faucet Instruction Manual
- May 15, 2024
- SKOWLL
Table of Contents
SKOWLL Bathroom Faucet Widespread 2 Handle Deck Mount Vanity Sink Faucet
Assembly Instructions
The installation distance and the waterway arrangement are for reference only, based on the actual scene according to. Please confirm the site size before installation.
Step 1: Assembly Diagram
- Identify all parts and arrange them for assembly.
- Note the hot (red label) and cold (blue label) water inlets to ensure proper configuration.
Step 2: Bottom Assembly and Measurements
Refer to the diagram for precise hole measurements and spacing, including faucet hole size and pipe connections.
Step 3: Counter Top Installation
- Drill holes in the countertop according to the reference dimensions provided in the diagram.
- Fix the valve body and attach the switch handwheel as indicated, ensuring the correct orientation for the hot and cold water.
- Insert the spout into the opened hole and secure it to the tee joint.
Step 4: Hose Attachment
- Attach the short hose to the tee and valve body.
- Before connecting the angle valve with the long hose, remove any foreign matter to prevent clogging.
Step 5: Final Assembly and Water Connection
Connect the faucet setup to the water supply, ensuring the angle valves are properly attached and the hoses are securely fastened.
Specifications
| Component | Dimensions |
|---|---|
| Faucet hole | 1.3in/32mm |
| Pipe connections | Various sizes as per diagram |
| Water inlets | Hot (red) and cold (blue) labels |
Troubleshooting Note
Please do not turn the reel gear. Appearers during installation. This scenario can be installed incorrectly.
INSTALLATION
The installation distance and the waterway arrangement are for reference only,
based on the actual scene according to.
Please confirm the site size before installation.
- Insert the spout into the opened hole
- After fixing the water nozzle with a nut, screw it into the tee joint
Attach short hose to tee and valve body
- Connect to body and angle valve with long hose
- Before connecting the angle valve, please remove the foreign matter in the water pipe, so as not to block the water channel of the product and affect the daily use.
PRE-CAUTION
FAQ
- How do I confirm the faucet will fit my installation site?
- Please confirm the site size and compare it with the provided dimensions before installation.
- Can I switch the placement of hot and cold water inlets?
- No, the hot water inlet is marked with a red label and should be on the left, while the cold water inlet, marked with a blue label, should be on the right.
- What should I do before connecting the angle valve?
- Remove any foreign matter inside the hose to prevent blockage and ensure proper water flow.