VEVOR RYTC0073 Panel Dolly User Manual
- June 1, 2024
- VEVOR
Table of Contents
PANEL CARTS
USERM ANUAL
MODEL: RYTC0073
RYTC0073 Panel Dolly
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
MODEL: RYTC0073
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
[email protected]
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our user
manual. The appearance of the product shall be subject to the product you
received. Please forgive us that we won’t inform you again if there are any
technology or software updates on our product.
SAFETY INSTRUCTION AND PRECAUTIONS
WARNING:
Read this material before using this product. Failure to do so can result in
serious injury.
Assembly precautions
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep assembly area clean and well lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs or medication.
- Weight capacity and other product capabilities apply to properly and completely assembled product only.
- Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded panel cart.
Use precautions
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
- DO NOT SIT, STAND OR CLIMB ON THIS ITEM.
- This product is not a toy. Do not allow children to play with or near this item.
- Do not exceed weight capacities, evenly distributed from bottom up. Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure.
- Use only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded panel cart.
- Use as intended only. To prevent tipping, push/pull using supplied handle only. Do not lift while loaded.
- Inspect before every use; do not use if parts are loose or damaged.
SAVE THESE INSTRUCTIONS
TOOL REQUIRED FOR INSTALLATION
Pliers Note: The tool not included with this product.
PARTS LIST
| 1-Side Panel | 2-Bearing Bar | 3-Star Handle Screw | 4-Caster |
|---|---|---|---|
| 5-Shim | 6-Splitpin | 7-Pipe plug | |
ASSEMBLY
- Install the tire on one side as shown in the following figure
- Repeat the first step once on the other side.
- Pipe plug installed at both ends of the load-bearing rod.
- As shown in the figure, adjust the working width of the side plate as required and tighten the screws.
- Assembly completed.
| Items| Description
---|---|---
1| Name| Panel carts
2| Model| RYTC0073
3| Parameter| Load(Max):600LBS , Wheel:8″
4| Package Size| 455x250x200mm
5| G.W.| 8.25KG
MADE IN CHINA
Technical Support and E-Warranty Certificate
www.vevor.com/support