BEGA 85129 Performance Floodlight Instruction Manual

: June 1, 2024
: BEGA

Table of Contents

BEGA 85129 Performance Floodlight
Product Usage Instructions
FAQ
Instructions for use
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 85129 Performance Floodlight

BEGA-85129-Performance-Floodlight-PRODUCT

Product Specifications

Model: Performance Floodlight
Model Number: 85 129
Power: 35-40 watts
Luminous Flux: 350 lm
Color Temperature: 3000 K (LED-0877/930) or 4000 K (LED-0877/940)
Color Rendering Index (CRI): >90

Product Usage Instructions

Safety:

The installation and operation of this luminaire must comply with national safety regulations. Only a qualified electrician should carry out installation and commissioning. The manufacturer is not liable for damage due to improper use or installation.

Installation:

Place the floodlight unit onto the mounting plate as shown in the sketch.
Align the unit and securely fasten with screws.
To adjust beam direction, loosen the joint screw using a hexagon socket head wrench (size 6 mm), set the desired direction, and then tighten the screw to torque of 12 Nm.

Maintenance

Regularly inspect the connecting cable between the mounting box and floodlight for damages. Only a qualified electrician should replace damaged cables. Do not remove the desiccant bag from the luminaire housing as it helps remove residual moisture.

Accessories:

Optional accessories include optical filters and shields. Separate instructions for these accessories are available upon request.

FAQ

Q: Can I replace the LED modules myself?

A: For safety and warranty reasons, it is recommended to have LED module replacements done by a qualified electrician.

Q: What should I do if the luminaire is not functioning properly?

A: Check the power supply, connections, and ensure the mounting is secure. If issues persist, contact a professional for further assistance.

Performance floodlight

BEGA-85129-Performance-Floodlight-FIG-1

Instructions for use

Application
Performance floodlight with mounting box. For a variety of interior and exterior lighting applications.

Product description

Luminaire made of aluminium alloy, aluminium and stainless steel BEGA Unidure® coating technology
Colour graphite or silver
Clear safety glass
Silicone gasket
Reflector surface made of pure aluminium BEGA Hybrid Optics®
Rotation range of floodlight 350°
Swivel range -30°/+90°
Mounting box with 2 fixing holes ø 6 mm · 85 mm spacing 2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm, max. 5 G 1.5@ Connecting terminal 2.5@ with plug connection
Earth conductor connection BEGA Ultimate Driver®
Complies with flicker requirements in accordance with IEEE 1789, DIN IEC/TR 63158, DIN IEC/TR 61547-1 LED power supply unit 220-240 V x 0/50-60 Hz DC 176-264 V DALI-controllable
Number of DALI addresses: 1
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
Protection class IP 65
Dust-tight and protection against water jets Impact strength IK08
Protection against mechanical impacts < 5 joule c – Conformity mark
Wind catching area: 0.057 m²
Weight: 6.2 kg
This product contains light sources of energy efficiency class(es) E

Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to
the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.
The ideal protection of all electronic components installed in the luminaires is achieved by using bounce-free switching contacts such as an electronic relay (solid-state relay), e.g. BEGA 71 320.

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
Undo hexagon socket head screw (wrench size 3 mm) up to the stop and disassemble the mounting plate.
Pass the power connecting cable through the cable entry in the mounting plate.
Note position of application of the mounting plate “arrow down”.
Fix the mounting plate with enclosed or any other suitable fixing material onto the mounting surface.
Be sure to use the gasket rings supplied. Make earth conductor connection.
Push silicone sleeves over the lines and make electrical connection to terminal (plug connection).
For digital control please use the 2-pole plug connector DA, DA.
In case this connector is not used the luminaire will be operated at full light output.
Push plug into coupler as far as it will go. Make sure that gasket is positioned correctly.

BEGA-85129-Performance-Floodlight-FIG-2

Place floodlight unit onto the mounting plate as displayed in the sketch, align and screw together firmly.
Adjustment of beam direction:
Undo joint screw (hexagon socket head wrench size 6 mm) and set the desired beam direction.
Tighten the joint screw.
Torque = 12 Nm.

Lamp

Module connected wattage 72.9 W
Luminaire connected wattage 78 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 35 °C

85 129 K3

Module designation LED-0877/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 9980 lm
Luminaire luminous flux 4987 lm
Luminaire luminous efficiency 63,9 lm / W

85 129 K4

Module designation LED-0877/940
Colour temperature 4000 K
Colour rendering index CRI > 90
Module luminous flux 9830 lm
Luminaire luminous flux 5063 lm
Luminaire luminous efficiency 64,9 lm / W

Lighting technology
Focused light distribution with minimal diffuse light percentage.
Half beam angle 11°
For special lighting applications, an optical filter can be used to change the symmetrical light cone into a flat beam light distribution.

Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high pressure cleaners.

Maintenance
The connecting cable between mounting box and floodlight has to be inspected regarding obvious damages and has to be replaced by a qualified electrician only.

Please note:
Do not remove the desiccant bag from the luminaire housing.
It is needed to remove residual moisture.

Replacing the LED module

The designation of the LED module is noted on a separate label in the luminaire or on the underside of the specific LED module.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
Disconnect the system.
Open the floodlight:
Undo locking pin (hexagon socket head wrench size 2.5 mm) on the back side of the floodlight housing.
Remove the trim ring along with the safety glass and reflector by twisting it counter-clockwise.
Replace LED module.
Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Place trim ring with glass and reflector on the floodlight housing in such a way that the notches in the trim ring and floodlight housing align on top to each other.
Twist on the trim ring clockwise as far as the stop. Tighten locking pin.

Accessories

71 292 Optical filter flat beam
71 334 Shield
71 339 Cylindrical shield
For the accessories a separate instructions for use can be provided upon request.

Spares