GROWONIX SLIM-SCRUB De Chlorinator Owner’s Manual

GROWONIX SLIM-SCRUB De Chlorinator

Product Information: GrowoniX Slim Scrub De-Chlorinator

The GrowoniX Slim Scrub De-Chlorinator is a water purification system designed to remove chlorine, sediment, and other harmful  chemicals from municipal water sources. The system uses reverseosmosis (RO) filtration method to purify water and ensure that thesolute (waste water) is contained within the pressurized chamberwhile the pure solvent (RO water) is allowed to pass freely through the membrane. The system is built in the USA and is available with additional KDF Carbon option for chloramine removal.

The Slim Scrub features a flow rate of 2 GPM and can scrub out 99% of chlorine and 90% of sediment. It has a filter capacity of 16,000 gallons and comes with a 5 micron sediment filter, eco coconut carbon filter, EZ hookup kit, and wall mountable bracket. The system also includes a brass garden hose connection and does not require any additional pre-filters.

Product Usage Instructions

1. Check the incoming water pressure and ensure that it is between 1-80 psi. If it exceeds 80 psi, install a pressure regulator before the unit.
2. Slowly turn on the incoming water pressure and allow all air to be discharged before full water pressure is restored.
3. Connect the Slim Scrub to the water source using the supplied garden hose adapter and coupler.
4. Connect the supply water line into the “Supply Water In” port and attach the product water line to the “Product Water Out” port. Use the supplied length of 3/8 tubing for this purpose.
5. Install the sediment filter and carbon filter in their respective ports. Use the filter wrench to tighten the filters securely.
6. If you have chloramine in your water source, install the KDF Carbon option for chloramine removal.
7. Mount the Slim Scrub on a wall using the supplied bracket or keep it in a suitable location.
8. When the filters need to be replaced, unscrew them using the filter wrench and replace them with new filters.

By following these instructions, you can effectively purify your water source and ensure that harmful chemicals are removed from the water. The Slim Scrub De-Chlorinator is an efficient and reliable solution for all your water purification needs.

INTRODUCTION

OUR MISSION
Durability, Reliability, Efficiency, Purity, and Conservation form the foundation on which we design and build all of our products. Consistent and superior quality sets us apart from other manufacturers and increases our value to you – our customer. Whether you are a hydroponics hobbyist, serious enthusiast, or large-scale gardener, GrowoniX is committed to bringing you the best solution for water purification systems.

WHAT IS REVERSE OSMOSIS?
Reverse osmosis (RO) is a filtration method that removes many types of large molecules and ions from solutions by applying pressure to the solution when it is on one side of a selective membrane. This filtering process ensures that the solute (waste water) is contained within the pressurized chamber while the pure solvent (RO water) is allowed to pass freely through the membrane.

TUNED FOR GROWING – IN TUNE WITH OUR CUSTOMERS
Traditional RO systems have waste ratios of approximately 4:1, which means there are 4 gallons of waste water produced for every 1 gallon of purified water. GrowoniX line of water filters achieve waste ratios of 2:1 with all 200-400 GPD systems, and an astounding 1:1 ratio with the 600-1000 GPD systems.
GrowoniX has created a complete product line that will address the needs of hydroponic operations of all sizes. Our filters will significantly reduce your water use while dramatically increasing your yields.

FEATURES

WHY USE A GROWONIX SLIM SCRUB ?
Chlorine, Chloramine and Chloride are but a few of the chemicals added to municipal water sources to kill harmful bacteria in our drinking water. This chlorine in low doses may not harm humans, but will kill beneficial bacteria and micro organisms essential for healthy plant growth. Our Slim Scrub de- chlorinator will eliminate 95% of the chlorine in the water, and 90% of the sediment.
Chloramine, a mix of chlorine and ammonia, used as a disinfectant, is being applied more and more to local water supplies because of it inability to evaporate when left in the air. Chloramine will not evaporate. To eliminate chloramine, a special KDF filter is required for the Slim Scrub which GrowoniX or your local dealer can supply. Ask for the GrowoniX KDF filter.
The Slim Scrub will not lower your parts per million or “ppm”. Only a Reverse Osmosis membrane can eliminate those particles. GrowoniX sells a complete line of Reverse Osmosis water filters from 100 gallons per day all the way up to 2000 gallons per day. You can see our complete product line at www.growonix.com.

COMPONENT DIAGRAM

1. SEDIMENT FILTER
2. CARBON FILTER
3. SUPPLY WATER IN
4. PRODUCT WATER OUT
5. 5’ LENGTH OF 3/8” TUBING
6. FILTER WRENCH
7. GARDEN HOSE ADAPTER
8. BRASS GARDEN HOSE COUPLER

SETUP INSTRUCTIONS

• The Mini-Scrub de-chlorinator is designed to be used between 1-80 psi of incoming water pressure.
• Do not exceed 80 psi of incoming water pressure.
• If incoming water pressure is too high, install pressure regulator before unit.
• Pressure regulators are available at www.GrowoniX.com
• Always turn incoming water pressure on slowly, allowing all air to be discharged before full water pressure is restored.

1. Connect your Garden hose to the Brass Garden Hose Swivel connector on inlet side of the Slim Scrub
2. Connect the 3/8 tubing to the quick connect fitting on the outlet side of the Slim Scrub

GARDEN HOSE ADAPTER ALTENATIVE

• Alternatively, Connect the 3/8 tubing to the Garden Hose Adapter and to the quick connect fitting on the outlet side of your Slim Scrub.
• Turn water on slowly.

REPLACING PRE-FILTERS

• Pre-filters should be changed when either brown discoloration occurs, or system flow rates have significantly declined.
• Always turn incoming water pressure off before servicing the unit.
• Always turn incoming water pressure on slowly, allowing all air to be discharged before full water pressure is restored.

1. Unscrew sediment and carbon filter housings using supplied filter wrench. Wash the inside of filter housings to remove debris
2. Install new sediment and carbon filter, making sure they go into the correct filter housings.
3. Tighten filter housings by hand, do not use filter wrench. Do not over tighten.

GROWONIX SYSTEM WARRANTY

For a period of one year from the date of original purchase, we will replace or repair any part of the GrowoniX reverse osmosis water system that we find to be defective in operation due to faulty materials or workmanship with the EXception of the replaceable filters and membranes.

GENERAL CONDITIONS
Damage to any part of this reverse osmosis system because of misuse; misapplication; negligence; alteration; accident; installation; or operation contrary to our instructions, incompatibility with accessories not installed by GrowoniX, or damage caused by freezing, flood, fire, or Act of God, is not covered by this warranty. In all such cases, regular charges will apply. This limited warranty does not include service to diagnose
a claimed malfunction in this unit. This warranty is void if the claimer is not the original purchaser of the unit or if the unit is not operated under normal municipal water or well water conditions.
GrowoniX assumes no liability in connection with this reverse osmosis system. GrowoniX assumes no liability for any damages incurred through the use of this product. It is the responsibility of the end user to gauge the safe use of this product in the environment where it is applied. We do not authorize any person or representative to assume for us any other obligations on the sale of this reverse osmosis system. The information given out in the manual we believe to be true, but are offered to you in good faith without guarantee because each application of this product is different and beyond our control.
THE FOLLOWING STANDARD OPERATING CONDITIONS FOR RESIDENTIAL/COMMERCIAL REVERSE OSMOSIS SYSTEMS MUST BE MET FOR WARRANTY TO BE VALID.

GROWONIX RETURN POLICY
MERCHANDISE RETURN DETAILS AND PROCEDURE:
If any merchandise was defective —we will refund the full purchase price upon receiving and reviewing the merchandise returned in undamaged condition.

RMA NUMBER:
You must first obtain a Return Merchandise Authorization (RMA) number from GrowoniX. com. Any products sent to GrowoniX without an RMA number will not receive a refund and may be returned to the sender at their expense.
All refund amounts will be based on the manufacturer’s warranty and GrowoniX return policy. Refunds will be issued back using the payment method you used when you placed your order. Refunds take up to 3-5 business days to process once we receive the return.

PACKAGING:
Please kindly re-pack the product in its original box, or a box of equivalent strength. The unit should be packed in the same manner as it came to prevent damage in shipping. Please return everything that was in the original box, including any free items if applicable. Be sure to drain out all water from wet systems and parts and wrap them in plastic bags before packing.

RETURN TO:
We will provide you with an GrowoniX warehouse address for return merchandise when we issue the RMA number.
www.growonix.com

References

• Home - Growonix

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>