BEGA 84855 Powerful Projector Instruction Manual

: June 1, 2024
: BEGA

Table of Contents

BEGA 84855 Powerful Projector
Product Usage Instructions
Frequently Asked Questions
Dimension
Instructions for use
Product description
Installation
Maintenance
Accessories
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 84855 Powerful Projector

Specifications:

Power Consumption: 38.4 W
Lamp Module Connected Wattage: 38.4 W
Luminaire Connected Wattage: 42.5 W
Rated Temperature: 25-35°C
Ambient Temperature: 25-35°C
Colour Temperature: LED-1020/830 (3000 K) / LED-1020/840 (4000 K)
Colour Rendering Index (CRI): > 80
Luminous Flux: 6635 lm – 7005 lm
Luminous Efficiency: 102.6 lm/W – 108.3 lm/W

Product Usage Instructions

Safety:

The installation and operation of this luminaire must comply with national safety regulations. The manufacturer is not liable for damage due to improper use or installation. Any modifications should be performed by qualified individuals.

Overvoltage Protection:

The luminaire’s electronic components are protected against overvoltage as per DIN EN 61547. For additional protection against transients, etc., consider separate overvoltage protection components available on the manufacturer’s website.

Adjustment of Beam Direction:

To adjust the beam direction, undo the joint screw using a hexagon socket head wrench size 5 mm. Set the desired beam direction and then tighten the joint screw with a torque of 7 Nm.

Maintenance:

Do not remove the desiccant bag from the luminaire housing as it helps remove residual moisture. The connecting cable should be regularly checked for external damage and only replaced by a qualified electrician.

Accessories:

Various plug types are available for connecting cables, including Plug type F/E (Germany/Europe), Plug type G (Great Britain), Plug type J (Switzerland/Liechtenstein), Plug type L (Italy/Greece), and Plug type K (Denmark/Greenland).

Note:

For detailed instructions on using the accessories, request a separate instructions manual.

Frequently Asked Questions

Q: Can I use this luminaire outdoors?
- A: This luminaire is suitable for indoor use only.
Q: How do I clean the luminaire?
- A: Use a soft, dry cloth to gently wipe the luminaire. Avoid using harsh chemicals or abrasive materials.\

Dimension

BEGA-84855-Powerful-Projector-fig-1

Instructions for use

Application

Performance floodlight BEGA UniLink® with earth spike and 5 m connecting cable with plug connector. A separate mains plug must be ordered in order to connect the floodlight to the mains. The various country-specific mains plugs with 0.5 m connecting cable, as well as extension cables and five-way distribution boxes are available as accessories.

Product description

Luminaire made of aluminium alloy,
aluminium and stainless steel
BEGA Unidure® coating technology
Colour graphite
Earth spikes made of glass fibre reinforced synthetic material
Safety glass with optical structure
Reflector surface made of pure aluminium
Swivel range -90°/+90°, 5 m mains supply cable
X05RN-F FEP 2 × 1@ + 1G2,5@ with plug-in connector
BEGA Ultimate Driver®
Complies with flicker requirements in
accordance with IEEE 1789,
DIN IEC/TR 63158, DIN IEC/TR 61547-1
LED power supply unit
220-240 V∼ 50-60 Hz
BEGA Thermal Control®
Temporary thermal regulation to protect
temperature-sensitive components without
switching off the luminaire
Safety class I
Protection class IP 65
Dust-tight and protection against water jets
Impact strength: IK07
Protection against mechanical
impacts < 2 joule
Conformity mark
Weight: 3.3 kg
This product contains light sources of energy efficiency class C

Safety

The installation and operation of this luminaire are subject to national safety regulations. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.

Total load

When configuring your lighting system, please ensure that the maximum power consumption of 6 A is not exceeded. Information on power consumption can be found in the instructions for use and data sheets for all BEGA UniLink® luminaires. Power consumption of 84 855: 0,2 A

Lamp

Module connected wattage 38.4 W
Luminaire connected wattage 42.5 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 35 °C

84 855 K3

Module designation LED-1020/830
Colour temperature 3000 K
Colour rendering index CRI > 80
Module luminous flux 6635 lm
Luminaire luminous flux 4361 lm
Luminaire luminous efficiency 102,6 lm / W

84 855 K4

Module designation LED-1020/840
Colour temperature 4000 K
Colour rendering index CRI > 80
Module luminous flux 7005 lm
Luminaire luminous flux 4604 lm
Luminaire luminous efficiency 108,3 lm / W

Lighting technology

Wide beam light distribution Half beam angle 44°

Caution:

The BEGA UniLink® plug connectors may only be connected and disconnected in a voltagefree state.

Installation

Press the luminaire with earth spike vertically into the soil until stability is achieved. If necessary, compact soil around the earth spike. Plug the floodlight’s connecting cable into the plug contact of the connecting cable with the country-specific mains plug, or into the distribution box or extension cable. To ensure a sufficiently low protective conductor resistance (loop resistance), the connecting cable of each luminaire in the system must not exceed a length of 50 m from the entry point.

Adjustment of beam direction: Undo joint screw (hexagon socket head wrench size 5 mm) and set the desired beam direction. Tighten the joint screw.
- Torque = 7 Nm.

Please note:

Do not remove the desiccant bag from the luminaire housing. It is needed to remove residual moisture

Cleaning · Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt and deposits. Do not use high pressure cleaners

Maintenance

The connecting cable must be checked for external damage and may only be replaced by a qualified electrician.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire.
Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced. Close the luminaire.
Tighten grub screws (wrench size 3 mm) evenly.
Torque = 2.5 Nm.