TECHKO SGL-406 Solar Directional Garden Light User Manual

TECHKO SGL-406 Solar Directional Garden Light

Product Information

• Product Name: Solar Directional Garden Light – Amber or White Light
• Model: SGL-406
• Manufacturer: Techko Group
• Contact Information:
  • Phone: 1-888-883-2456
  • Email: support@techkogroup.com
• Product Specification:
  • Material: ABS
  • Solar Panel: 3.5 X 3.5 inch / 1.5 W
  • Battery: Li-ion battery 18650 2200mAh
  • Waterproof: IP65 Performance
  • Size: 5.47 x 29.37 inch
• Accessories Included:
  • 1 Lighting section
  • 1 Lower section
  • 1 Ground spike
  • 1 User manual
• Warranty: This product has a 1-year limited warranty. For further information, please visit our website at www.techkogroup.com
• Copyright: Reserved Patent Pending: US 16/279.107; CN201920118689.6

Product Usage Instructions

1. Ensure that the soil where the spike is to be placed is soft enough to insert in order to prevent any damage to the stake/poles when installing. This can be done by adding water to the soil to help soften the installation site or gently breaking up soil with a tool before installation.
2. Pull the ground spike out from inside the lower section.
3. Carefully insert the ground spike into the lower section matching the notches together.
4. Carefully insert the lighting section into the lower section matching the notches together.
5. Face the light towards the desired location.
6. Position the ground spike and press firmly to secure the solar garden light into the ground.
7. Adjust the light accordingly once installed.
8. Switches & Functions (Please see Figure A for reference):
9. The power switch is located on top of the solar light.
10. Slide the switch to the desired position:

  *  **a. White –** Changes the lights color to a bright white light
  *  **b. Amber –** Changes the lights color to a warm amber light
  *  **c. Off –** Move the switch to the center to turn the solar light off. While in the off position, the unit will not charge.
3. Even when the unit is on White or Amber settings during the daytime, it won’t illuminate as the solar panel is equipped with a daylight sensor. It will automatically charge and turn on the LED lights at dusk or when the surroundings turn dark.

9. WARNING & NOTICE:
   • Do not look directly at the LED light, or it may damage your eyes.
   • Do not attempt to disassemble or remodel the product. Any changes can be dangerous and will void the warranty.
   • Please keep the product away from flammable items, or explosions or casual injuries may occur.
   • Please switch OFF the product when it is not in use for a long period of time.

CHARGING

PLEASE FULLY CHARGE THE PRODUCT BEFORE USING:

1. Please turn the product to the white or amber setting and fully charge under direct sunlight before use.
2. Charging time may be vary depending on the weather, temperature, and seasons.
3. Do not charge the product indoors or any place where direct sunlight can’t reach. Otherwise, the product will not charge properly.
4. Please keep the solar panel clean to make sure the product can be properly charged. Frequently clean the solar panel as needed. Avoid scratching on the panel or it may lower charging efficiency.

INSTALLATION INSTRUCTIONS

Note: Please ensure that the soil where the spike is to be placed is soft enough to insert in order to prevent any damage to the stake/poles when installing. This can be done by adding water to the soil to help soften the installation site or gently breaking up soil with a tool before installation.

1. Pull the ground spike out from inside the lower section.
2. Carefully insert the ground spike into the lower section matching the notches together.
3. Carefully insert the lighting section into the lower section matching the notches together.
4. Face the light towards the desired location. Then position the ground spike and press firmly to secure the solar garden light into the ground. Adjust the light accordingly once installed.

Switches & Functions(Please see Figure A for reference)

1. The power switch is located on top of the solar light.
2. Slide the switch to the desired position.
   • a. White – Changes the lights color to a bright white light
   • b. Amber- Changes the lights color to a warm amber light
   • c. Off – Move the switch to the center to turn the solar light off. While in the off position, the unit will not charge.
3. Even when the unit is on White or Amber settings during the daytime, it won’t illuminate as the solar panel is equipped with a daylight sensor. It will automatically charge and turn on the LED lights at dusk or when the surroundings turn dark.

WARNING & NOTICE

1. Do not look directly at the LED light, or it may damage your eyes.
2. Do not attempt to disassemble or remodel the product. Any changes can be dangerous and will void the warranty.
3. Please keep the product away from flammable items, or explosions or casual injuries may occur.
4. Please switch OFF the product when it is not in use for a long period of time.

PRODUCT SPECIFICATION

1Ground spike 1User manual

This product has a 1-year limited warranty. For further information please visit our website at www.techkogroup.com
Copyright Reserved
Patent Pending: US 16/279.107; CN201920118689.6

1-888-883-2456
support@techkogroup.com

References

• Techko Group since 1982 | Solar Lights, Security, and Office Products

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>