QAZQA Jeana SL Surface Mounted Spotlight Instruction Manual

: June 15, 2024
: QAZQA

Table of Contents

Safety Precautions
SAFETY INSTRUCTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Jeana SL Surface Mounted Spotlight
Instruction Manual

Safety Precautions

Jeana SL Suitable light source: GU10,Halogen Max 35W Warning: When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes
Jeana SL 93283/93284/103877/103878/105996 1xGU10 Max.35W
Overall size: Jeana SL 2 93285/93286/103879/103880/105998 2xGU10 Max.35W
Overall size: Jeana SL 3 93287/93288/103881/103882/106000 3xGU10 Max.35W
Overall size:

SAFETY INSTRUCTION

Please study the instruction manual and below information carefully before installing or using this product. Please keep this user manual for further reference

The luminaires may only be installed by authorized and quolified technicians according the valid regulations for electrical installation.
Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
Exterior lighting must not be installed during rain.
Take account of the minimal separation distance from other objects and the room required around the fitting.
If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
Take account of all available technical information.
Meaning of symbols:
| This icon indicates the level of water-proof and dust-proof
---|---
Protection Class |: the fitting must be earthed
Protection Class Il: the fitting is doubled insulated and does not require earthing
Protection Class Ill: the fitting is low voltage
Minimum distance from lighted objects (meters)
The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
The armature is designed to work only with the indicated voltage. Different items require different working voltage.
The luminaire can be used in combination with a dimmer
The luminaire can be dimmed by wall switch
| The reference light angle and light space of the luminaire This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste
Take note of the symbols when connecting wires: