midmark 1-200-0310 IQvitals Zone Device User Guide

June 3, 2024
Midmark

midmark 1-200-0310 IQvitals Zone Device User Guide
STIHL WP 300 Water Pump

Labelled Diagram

NOTICE
Attach all accessories to the device before attaching the power cord and turning the power ON.

NOTICE
Assure the selected mounting option is secured in place before proceeding.
Labelled Diagram

Symbol Description
Manufacturer
Consult instruction for use
Caution

NOTICE:
Always refer to the device operation manual for detailed instructions for use, warnings and cautions prior to using the device.

Step 1: Temperature Module Cable and Power Supply Cable

Place cable(s) between the tracks of the front of the main bracket toward the A) bottom of the bracket.

NOTICE:
If using the wall mount articulating arm place the power supply cable with the temperature module cable. This step may not be necessary if using the mobile cart.
Temperature Module

Step 2: Front Bin and Cable Cover

  1. ) Align top and bottom latches of the bin onto the main bracket. Assure cables do not get pinched.
  2. Slide down and snap onto bracket.
  3. Slide cable cover onto main bracket over temperature cable
    Cable Cover

Step 3: Device

  1. Slide device onto bracket of mounting option.
  2. Secure device with a three-arm knob.
    Device

Step 4: Temperature Cable

  1. Connect cable to back of device.
  2. Connect cable to bottom, rear of front storage bin
    Temperature Cable
    Temperature Cable

Step 5: Temperature Module

  1. Connect temperature module cable to bottom of the front storage bin.
  2. Place temperature module in cradle of front storage bin.
    Temperature Module

Step 6: NIBP Hose

  1. Connect NIBP hose to port.
  2. Connect blood pressure cuff to NIBP hose.
  3. Wrap excess hose around cable wrap. Store cuff in main bin
    NIBP Hose

Step 7: SpO2 (Optional)

  1. Connect SpO2 patientcable to SpO2 port.
  2. Connect SpO2sensor to patient cable.
  3. Wrap excess cord on side of storage bin.
    Optional

Step 8: USB cable (Optional)

  1. Insert one end of the USB cable into the USB port.
  2. Insert the other end of the USB cable into PC or compatible device.
    USB cable

Step 9: Power Supply

  1. Plug power supply cord into port.
  2. Attach AC power cord to power supply.
  3. Plug power supply into standard 115V receptacle

Power Supply

Step 10: Laptop Tray

  1. Align grooves of tray to the edges of the device and slide tray forward.
  2. Secure tray to device with three-arm knob.

Laptop Tray

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals